1 / 4
Filler for behinde Outlets // GAMMA Everest afdekplaat afdekraam — image 1
1 / 4

Filler for behinde Outlets // GAMMA Everest afdekplaat afdekraam

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filler ring for around GAMMA Everest afdekplaat afdekraam.

Rating
0 / 5
Likes
3
Downloads
31
Makes
0
Views
867
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Filler ring for around GAMMA Everest afdekplaat afdekraam. (Wall Outlets)

Sizes : Single, Duo, Triple

We bought these outlets, but later discovered they have an strange design on the bottom, keeping a gap open. Where unsure if this is part of the design, or if it is actually meant to sit deeper in the wall since that would need a rather perfect cutout in the wall since it has little overlap.

We already had bigger holes in our wall plaster so we needed the extra filling anyway, so we decided to 3D print it from glow in the dark to also have a second purpose ;). We can now orient our self better in the room when all lights are off, and it looks cool.

Printed on 0.2mm layer height
ColorFabb Glow in the dark PLA
Prusa MK3 0.4mm nozzle

Tags