Search results: evolve

display stand label with two colours for DeSteiner Revolver II

Revolver Fidget - Remix

I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…

Custom Parts for - Prop Gun | Revolver - Single Action

Thanx to the fantastic work by DeSteiner (as well as his help in making the custom text), I was inspired to make a few custom parts for his prop revolver. All parts have been test printed, and will have the same fit as the original parts…

Helldivers p4 senator revolver prop

now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props

Colt_Walker_Revolver

asssy original Colt_Walker_Revolver

Shellfish - a Silly Shell-ejecting Revolver Blaster

IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…

Ark Survival Evolved Logo

This is the logo of Ark Survival Evolved, the game. Can print it without stand, or print both then assemble them. I printed them flat without support. You can donate/support here : https://www.paypal.me/ludiks , thank you so much if you…

Hellboy Revolver 'Good Samaritan' for Dummy / Lucky / Mini 13

Another revolver for the 13s, this time it's Hellboy's. P.S. Is it too small?

Talon Helldivers revolver

I built the revolver in pieces to print easier. The grip has an outline to add the texture of gripping if you wanted to. The way I have the STL set up is the best way I find to print. Please contact me if you may have any questions. Have…

Good Samaritan - Hellboy Revolver (Separated)

Separated files of "Lautrec_996" model of the Good Samaritan.

Bullet Puller Revolver Storage system.

I was tired of searching for the correct RCBS collet for the bullet puller. Rather than keeping them hidden in a box, I decided to create a display storage system that made it easy to find what I needed while keeping them safely stored.…

Colt Python revolver prop

Hellboy Revolver 'Good Samaritan' for Dummy / Lucky / Mini 13

With all of my Dummy 13 prints, I print the frame in PETG and then any armor or accessories in PLA+

Shadow Revolver

A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Revolver Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a…

Jabra Evolve2 75 Wireless Charger Wall Holder

Wall holder for Jabra Evolve2 75 Wireless Charger

Ford Transit MK2 1985 - Bose Revolve+2 - Dashboard Soundbox Holder

In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…

Revolver Pill Dispenser Magnetic & Customizable

The 3D-printed pill dispenser in the shape of a revolver is an innovative and practical solution for daily medication management. With its unique revolver-inspired design, this dispenser provides an easy, secure, and organized way to…

Fantasy revolver

Wanted to spice up my plague doctor costume with something that I wouldn’t get arrested for, this revolver clearly would not function in our mundane world. Requires: Epoxy resin Paints Scrap part 50 x 30 x 3mm plexiglass or similar…

display stand label with two colours for DeSteiner Revolver II

The top text on the original label needs three colours to look good (one for the background, one for the bottom text and the drop shadow on the top text and one for the letters of the top text). I only had black and white PLA tho, so I…

BAK Revolver 4s Driver Side End Cover

BAK Revolver 4s Driver Side End Cover. This is still a work in progress. I printed this one to make do in the meantime. Anyone who has this tonneau is probably missing theirs as well. I made the insert so you can glue it in place, and it…

REVOLVER - keychain

Simple revolver keychain

Holster for DeSteiner Revolver II

I created a holster for my sister's halloween costume. The revolver is made by the designer DeSteiner You can print it on a 256x256mm build plate, fold it and stitch it together with thread. Any mostly standard 40mm belts will fit.

2x - 7mm and 8mm Wedge - Corrected Model for "MAGNET_REVOLVER_SIDE-PART (D7,D8 - 2x)"

The author uploaded the wrong STL file for the "MAGNET_REVOLVER_SIDE-PART (D7,D8 - 2x)" file so I made my own version.

Revolver

gun

2K Gun Body Mount & Rotating Nozzle Holder , držák 2k pistole a revolverový zásobník špiček

Popis: Univerzální nástěnný držák pro 2K (dvousložkové) lepicí pistole. Na rozdíl od většiny držáků tento design podpírá pistoli za tělo, nikoli za kartuši, což zajišťuje kompatibilitu s různými poměry kartuší (testováno s 1:1 a 1:10). 2k…

Colt Python revolver prop

Colt Python revolver realistic prop gun

Avatar Col. Quaritch's Wasp Revolver

A re-upload of the Wasp Revolver carried by Col. Miles Quaritch in Avatar (and later Avatar: The Way of Water and Avatar: Fire and Ash, I believe). It is a non-functional prop. I modeled this many, MANY years ago under a different handle.…

BANG! Compact Travel Organizer – Secure Storage Box with Revolver Life Counter & 3D Accessories (Base + Expansions)

BANG! Compact Travel Organizer & Thematic Upgrade Set This project is a compact and secure travel storage solution for the board game BANG! . Designed to be smaller and more portable than the original box, it securely stores the base game…

Shadow Revolver

A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Revolver Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a…

Dremel Werkzeuge Revolverturm

ich hatte bisher das Board von "NATA" genutzt , aber mit der Zeit wurde der Platzbedarf zu hoch und so habe ich diesen Revolverturm erstellt, Reicht für 100 Dremel Werkzeuge, auf 90x 210 mm Fläsche

Quick Loader for DeSteiner Single Action Revolver Prob - Clamp Style

The first of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

Quick Loader for DeSteiner Single Action Revolver Prob - Twist 'n Shoot

The second of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

Quick Loader for DeSteiner Single Action Revolver Prob - Push 'n Shoot

The third of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

Revolver Cylinder AA Battery Holder (Desk Organizer)

Donnez un look "Far West" à votre bureau avec ce support de rangement pour piles AA en forme de barillet de revolver. Conçu pour accueillir 6 piles AA, ce modèle n'est pas seulement esthétique, il est aussi fonctionnel : le barillet est…

Megachelon from ARK: survival evolved

On top of the full model, I also included a version with a flat top with a separate head that is easier to print on its back and can take advantage of effect plates and fancy bottom surface infill patterns. I used hilbert curve and a…

Super73 Drop-In Holster for Bose SoundLink Revolve

I designed this custom drop-in holster to mount a Bose SoundLink Revolve speaker directly to my Super73 RX. If you want to listen to music while riding and need a mount that can handle high speeds, heavy bumps, and vibrations, this is it.…

S&W 617 Revolver Speed Loader Tray for CCI Box

This is an insert of CCI 100 round boxes that stores 40 rounds in a way that works with speed loaders. There is no space in the box for the actual loader, this holds ammo only. I print them upside down but it shouldn't really matter, no…

Jabra evolve 65 joint fix

E_Tech 14 made an awesome jont fix. I took his design and made it even better.. now it can be printed much easier. The design is also optimized. update: both sides Remix of: https://www.thingiverse.com/thing:4724194

Johnny West Action Figure Revolver

The .gcode is already cut in half and placed in the most optimal print position. The .stl and .step are left whole in case you want to use them elsewhere. Happy Printing!

AA battery organizer Revolver drum

Introducing the AA Battery Revolver Drum Organizer : a sleek and innovative solution for your battery storage needs. Inspired by the classic revolver drum design, this organizer is ingeniously crafted to hold up to 8 AA batteries. Its…

Revolver Fidget - Remix

I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…

revolver cylinder pen holder

pen holder

Hamstringer, a half dart nerf revolver

Nerf revolver firing short darts from a 6 dart cylinder that swings out and is removable. Prime the blaster by pulling the hammer down with your thumb. Two way trigger, pull trigger to fire, push trigger forward to unlock the arm and…

Thunder Bladed Revolver 1 for Dummy 13

Bladed Revolver for Dummy 13 both Right and Left Hands

Super Bladed Revolver 1 for Dummy 13

Bladed Revolver for Dummy 13 both Right and Left Hands

T4E HDR 50 CAL. HOME DEFENCE REVOLVER UMAREX holster

holster for the hdr 50 umarex revolver

Super Bladed Revolver 2 for Dummy 13

Bladed Revolver for Dummy 13 both Right and Left Hands

Nerf Cylinder for First Strike Paintball Revolver

This is a conversion cylinder for the First Strike paintball revolver that allows it to use short darts. Only mod needed is to cut down the barrel, and add the metal piece to the cylinder. This thing shoots HARD.

Dan Wesson Revolver Scatter Shell (6mm)

This is a Shell for the Dan Wesson Revolver designed for 6mm BBs. The Feature that makes it special is the "Shotgun-like" capability of shooting up to 5 BBs at once. You may have to scale it to fit you printer accuracy. Feedback is…

Holder for Jabra Evolve 40

There are 5 parts that need to be printed. The "holder" is pushed onto the "clip". Then the "screw" is screwed into the "clip". Finally, the "cap" is screwed onto the "screw" with an M3 countersunk screw (8-18mm long). Everything can be…

Revolver Cylinder EDC Nut Driver

6 Shooter revolver nut driver holder and tool for multiple 1/4" driver bits of your chose. Filament PLA Layer Height 0.02 Infill 20% No Raft No Supports

Revolver Wall Decoration

Revolver Wall Decoration It uses very little material and still brightens up the room. Layer Height: 0.2mm Infill :100%

New Housing for Evolve Gen 2 Remote

I’ve created a new remote case to replace the original one. The annoying finger trigger is gone, and now there’s a nicer, more comfortable thumb throttle. Important Notes: BEFORE YOU START - DESOLDER THE BATTERY! Before making any…

Revolver safety flag

Safety flag for Korth National standard 375 magnum. Only had ABS at hand when makin this but i guess you can use any kind of filament.

Joker Revolver

Das ist die Joker Version vom "Prop Gun | Revolver - Single Action" von Steiner3D. Siehe: https://www.thingiverse.com/thing:3004363 oder hier: https://www.printables.com/de/model/276918-prop-gun-revolver-single-action Ich hab den Lauf…

Trigun Revolver AGL .45 with mechanical parts

A Totally new make of the revolver from the original Trigun anime. This is the post repairs version with the smooth side cylinder. If there is interest I will also make an optional fluted cylinder like he as at the beginning of the…

9mm Japanese Revolver/9x22mmR Type 26 Cartridge

Model of the 9x22mmR Type 26 cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…

Evenflo Revolve360 car seat cup replacement parts

These are replacement parts for the cup and its supporting wall part for the Evenflo Revolve360 car seat. There are two choices of cups: Separate keyed Left and Right cups - this is how Evenflo intended design for the cups. They each have…

Lego Compatible (30132.dat) Minifig Gun Revolver

This model is compatible with the lego system.

Gunblade Revolver with Scope

Viel spaß beim drucken =) Datei ist von mir selbst erstellt

Nerf Fortnite 6-SH Revolver laser adapter

Nerf Fortnite 6-SH Revolver laser adapter.

Jabra Evolve2 75 Wireless Charger Wall Holder

Wall holder for Jabra Evolve2 75 Wireless Charger

Bose Revolve - Revolve+ hanger

Hook for hanging Bose Revolve speaker from a rail. Opening is ~30mm. suit ~25mm (1") rail. Printed in PLA. 10% infill. Corner infill 40%. Height can be scaled to hang items that are lighter.

Revolver 2 parts

Use supports

Evolved fish

According Darwin's law, this fish has been evolved

Evolve Skateboard (GTR) fenders

Hi there, I created some fenders for my Evolve GTR skateboard with the 150mm(6inch) all train wheels. I printed the fenders in PETG with 3 perimeters and 0.2 layer height. This way they are still a bit flexibel incase you hit something or…

Revolver Speed Loaders / Loading Aid

Printed in TPU 95A

Prop for Cattleman Revolver

Originally designed as a Halloween Prop, this is a crude replica of Arthur Morgan's Cattleman revolver. I wanted to challenge myself and so this is a 1 day CAD design challenge. The revolver lock pin will be tight, but it will go in. It…

Revolver drum Battery AA holder

Bearing - 28 mm x 8 mm PLA 5 wall 15% infil

Revolver Cylinder Pen Holder

0.3mm layer height, 20% infill, no supports. Scale up or down in PrusaSlicer depending on your needs.

Bigger Revolver Cylinder Pen Holder

0.3mm layer height, 20% infill, no supports. Scale up or down in PrusaSlicer depending on your needs.

Weighted Revolver Base

Base holds pennies to add weight

Revolver Stand (GP100)

I created this stand to support a revolver (specifically a Ruger GP100) vertically for storage in my safe. It may work for other models. For this style of print I've achieved adequate strength in PLA with 3 perimeters and no infill. Use…

revolver file organizer

an organizer for a basic set of handfiles from hypertough. it will spin freely printed in pla i put additional support center cylinder of the base so overhang would have better support and more infill

AA Battery Holder Revolver

Designed a battery holder for 6 AA batteries with a Japanese touch (I tried to give it a Japanese touch lol). Gave it a rope around the cylinder and added the character for “death” on the side. Prints with no supports, easy print

Evolve Hadean Shredlight Mount

Print with support, Shredlight mount side down. Use double sided tape to mount onto the rear belt cover.

Evolve Hadean Nose Bumper

Printed in TPU for durability, whatever infill you feel like. Bolts into the front holes of the deck, square hole can be used as a handle to lift the front of the board, but not recommended to lift entire board even though it is strong…

Festool - Bose SoundLink Revolve Speaker Mount

Hello Good People!! I have created this speak mount to use with the Festool Multifunction Table MFT 3 . This mount is specific for mounting the Bose SoundLink Revolve speaker. The mount will have a snug fit to the base of the speaker and…

Microscope Nosepiece / Turret / Revolver Adapter for Mitutoyo FS70

Microscope Nosepiece / Turret / Revolver Adapter for Mitutoyo FS70. Ideally it should be machined out of stainless steel, but it should work as a polymer print too (use strong filament and settings for high strength though). The grub…

STANAG / Picattiny rail for uberti 1851 black powder revolver

I remixed STANAG 4694 rail by cmh to create this. Stanag rail should be compatible with picattiny accessories. My little contribution in making the world a weirder place. It is designed for fit .36 caliber Uberti colt 1851 I don't know if…

revolver pen holder

a tuff looking pen holder for all those cowboys out there

Jabra Evolve charging dock (for 10 mm magnetic cable)

Remix of https://www.printables.com/model/751525 with larger hole for different kind of magnetic USB cable

Revolve Boat Hook Roller v2

FTC FRC Drum designed for the revolve boat hook roller on a 1/2" hex. Includes heat set insert holes for M4x10x6mm

Jabra Evolve2 65 Charching Stand

Deutsch: Dieser Stand ist ein Remix des Ständers für das Jabra Evolve2 65 Headset mit mehreren Verbesserungen: Deutsch: Dieser Stand ist ein Remix des Ständers für das Jabra Evolve2 65 Headset mit mehreren Verbesserungen: • Optimierte…

Revolver for Dummy 13

A revolver for dummy 13

BlissLights Sky Lite Evolve Wall Mount

It's probably not a good idea to shine lasers into your eyes all the time, even if they are improving the ambiance of the room. I made this quick and easy mount to be able to mount the BlissLights Sky Lite Evolve (the one that looks like…

Sci-fi Revolver (Trigun)

! The model shown in the pictures was painted ! Revolver from the old Trigun series (Vash the Stampede). Recommended to print the Revolver in two halfs, and then glue them together. Printing the gun as a whole will probably fail and needs…

Ullr- Pump Action 3d Printed Nerf Revolver

Pictured with this grip: https://www.printables.com/model/1192191-swoopy-afg-for-short-rails and this PCAR: https://www.thingiverse.com/thing:5174583 THIS WAS MY FIRST DESIGN, AND MAY LACK A LEVEL OF POLISH. THIS IS NOT A BEGINNER BUILD.…

Colt SAA Revolver Miniature

Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel. Prints as 6 different parts that are press-fit together. Simplified model: The hammer is fixed and no loading gate. Trigger moves but does…

18650 battery case - loading gate revolver

For this build you will need: 2x brass insert M3 (5x5 - diameter x height) length does not matter so much, you can use longer ones, maybe even thicker, but I have not tested them. Holes are 4,5 mm in diamter to accomodate these 1x M3x8mm…

Headspace Gauge Revolver

I was tired of searching for the gauge needed to measure Headspace. Rather than keeping them hidden in a box, I decided to create a revolver display storage system that made it easy to find what I needed while keeping them safely stored.…

Bullet Comparator Revolver

I was tired of searching, for the needed comparator, to measure bullet OGIVE to COAL. Rather than keeping them hidden in a box, I decided to create a revolver display storage system that made it easy to find what I needed while keeping…

Revolver for dummy 13 (1.0)

This is a revolver with a hand for the dummy 13

Replacement Hoover Evolve Pet Elite Vacuum hose connection

Replacement hose connector for the Hoover Evolve Pet Elite The latch part on mine broke due to fatigue so the hose would no longer stay clipped in. Printed this in TPU because it's basically impossible to flex any other plastic onto the…

Jabra Evolve2 Charging Dock tight fit

When you have issues with elephant feet on the first layers, you might sand the edges othewise the cable might not fit Printed without supports. If you use 50-60% infill plus increase the perimeter, the stand gets more heavy. an. optimum…

Ford Transit MK2 1985 - Bose Revolve+2 - Dashboard Soundbox Holder

In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…

Cosplay Boltgun Revolver

I needed a chunky gun for a cosplay character. This revolver is modeled after a design by Brexit. It is a static model so no real moving parts.

Magnetic Revolver Bitholder for Parkside PARS 4 A1 Electric Screwdriver

Magnetic Revolver Bitholder for Parkside PARS 4 A1 Electric Screwdriver This Magnetic Revolver Bitholder is designed to be a practical and fun accessory for your Parkside PARS 4 A1 electric screwdriver. It offers a smart and organized way…

Rear Blade Sight for DeSteiner Revolver II

This is just a slight modification of the original rear sight for the DeSteiner Revolver II. As of the time I am first uploading it, I have yet to print or test it, but while designing this piece, I tried to make absolutely sure it will…

holster revolver

i made a holster so cou can have the revolver on you for halloween it shoud be fine