Counting matching models…
Fan cooler adaptor base for the Western Digital "My Cloud Ex2 Ultra". Smart HDD temp indicator (without fan cooler powered): 52°C Smart HDD temp indicator (with fan cooler powered): 30~35°C Description: Fan height 15mm I designed a…
I've only uploaded the files I changed, the others can be obtained from Hex2000's post. Note: you may need to change your infill settings to get these to balance just right. It was a bit of trial and error for me.
Adapter to connect a 35mm shop vac nozzle to a Bosch PEX270 orbital sander. Print the tap lying on the side to increase strength and fasten with a 3x8 mm bolt. Printed in PETG. Support is required for the tap base on the adapter. STEP…
Wanting a scraper that outlasts the competition? Sick of fiddling with replaceable ends not fitting properly? Well here it is! Introducing the Bed Scraper LifeX2, with twice the scraping power and twice the life of any old style single…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 80mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
Warning: Please use this bracket with a rack tray. Otherwise, it may not be able to handle the weight of the switch. Use as your own risk. This is a rack mount bracket for Juniper EX2300. Use 4 M4* 8mm screw to mount this bracket onto the…
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Some custom TPU parts for my build on the Apex2 2" FPV frame (from aliexpress/amazon). Parts include: - Camera mount for Foxeeer predator nano 5 racing and Ant nano. - Antenna mount - Battery Pad (with and without built-in lipo mount(2s…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 140mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
I have a Begode EX20S suspension unicycle, and found that I wasn't really able to use the upper stock power pads very well, as the 'gap' between the front and rear pads is quite large so I found I wasn't even moving my leg back far enough…
Just a simple switch I got commissioned To make 10 of them And They ghosted me after I delivered the first prototype so I'm publicly releasing the files This video explains my thought process for all the alterations
A simple vertical stand for your Juniper EX2300-C Ethernet switch! This holds the EX2300-C upright, with some small fingers that gently hold onto the switch's cooling fins. You'll probably want to print two of them.
This is minimalistic Amazfit GTR3/GTS3/GTR4/GTS4/T-Rex2/Cheetah charging stand. Original model was created for round Mi Band charger. I recreated the similar model from scratch when I have switched to Amazfit GTR3. Requirements: M3x12mm…
I designed these with a spider web motif, and suggest printing in PETG, or you could try TPU if you're comfortable printing with supports in TPU (I haven't figured that out yet so mine were a mess). They're not large, but provide some…
The bottom corners of the aluminum battery cases on the EX20S are relatively exposed, especially on tight trails and on compression of the suspension and/or tire. I designed these corner protectors to protect the cases from scratches and…
The original part breaks easily on this monitor, this is a replacement part In order to replace the part you need to remove the monitor plastic cover (you need to start from the frontal frame, it's easy), look for a video on youtube,…
This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table…
Very simply mount, that will fit on onto an extrusion frame. Holes for mounting to 2020 extrusion are M5 sized. Holes for Duet board are m3. [Minor update 1]: I made a small mistake on the screw recess. Updated in v1.3.1. [ Update ]:…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
WD MyCloud Ex2 NAS Cooling Stand This accessory improves drive cooling with an 80mm PC fan. Temps dropped from 47 °C to 32 °C. Printed on Ender 3 Pro (4 walls, 15% infill), it is quite sturdy. NAS feet fit into matching holes for a solid…
I hated how my WD Mycloud EX2 Ultra vibrated on the shelf since mine was missing the rubber feet from the factory. I made this adapter that fits into the slots at the bottom of the device allowing you to model or use premade models of…
This rear grip fits directly over the sharp metal edge of your EX20S electric unicycle, giving you a more comfortable option to lift or carry the EUC. The centre hole is to allow fitting without interfering with the screw that comes down…
I designed this easy-to-print front fender as a way to increase the waterproofing on my EX20S. The mounting holes line up with those used for the rear fender bracket to the EUC frame, so simply remove the rear fender by removing the two…
Tested with 10mm steel ball bearings (~4g each, 20-pack from Amazon). The printed bar weighs approximately 11g in PLA. With the original pocket position (~87mm from pivot), the counterweight overpowers the 5-ball side and the bar won't…
This is a prop guard for mjx bugs 3 mini/eachine ex2 mini. Its flat not like the original, but its easier to print this form, and I think it works. Print Settings Printer: prusa i3 rework 1.5 reworked by hygy Supports: No Resolution: 0.16…
We use this style remote for most of our overhead cranes. One was dropped on the concrete floor and broke--they are not cheap to replace. We decided that a few dollars worth of TPU, some CAD, and several hours of print time was worth it…
This is a pusher for a Waring JEX238 but can be customized to fit other sizes, brands, models. Print Settings Printer Brand: 3D Systems Printer: Cube 3 Rafts: No Supports: Yes Category: Kitchen & Dining
This is a stand for the Sony Walkman WM-EX20 so that it can stand upright. Example printed in PETG with 20% infill and no supports.
iFlight XL5 / EX220 GoPro Session pod
A replacement ball bearing for the rev ex 2, although it might be able to be used for other Bcars. Only hardware is the m3X10mm screws like the original rev ex 2. Enjoy!!!
The Böker 06EX227 and 06EX229 “tactical” balisongs have a lot going for them, but the best you can say about their looks is that they have an, er, Efficient Germanic Aesthetic. But since these are scales over steel liners, they're user…
Little camera stabilizer in delta format you use the original camera frame... you only replace the upper part of camera holder on mjx bugs b3h and eachine ex2h the file gimbal mjx bug b3 pt2 need a support when you print i used 20% infill…
I improved the original design by adding a drainage hole on the bottom of the cover so water can drain out if the exercise bike is exposed to the weather. In my pictures, I spray painted the pedals to protect the exposed metal of the…
Very quick design i made for a Spektrum Satellite Receiver Mount to a ImmersionRC Vortex 250 Pro. Fixed with thin double side tape and a zip tie.
Feets for the Western Digital (WD) My Cloud EX2 Network Attached System. My original rubber feet got lost over time and they are very important for the cooling of the device by allowing air flow from the bottom to the top. Therefore I…
This 2-piece prop guard is designed specifically for the SpeedyBee Flex25. The split construction allows each half to be printed in a different color, making dual-color builds easy without filament changes during the print. A dedicated…
I just modeled another hex key organizer key fob and shortened the allen wrenches to go inside. So I had the cut-offs lying around (I have shortened them about 30mm and I had those pieces left. So I made another one to recylce just these…
This camera mount is designed specifically for the Thumb Pro W on the SpeedyBee Flex25 frame. It provides a secure fit while keeping the overall weight low, making it ideal for both freestyle and cinematic flights. The mount is easy to…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
We use this style remote for most of our overhead cranes. One was dropped on the concrete floor and broke--they are not cheap to replace. We decided that a few dollars worth of TPU, some CAD, and several hours of print time was worth it…
A replacement ball bearing for the rev ex 2, although it might be able to be used for other Bcars. Only hardware is the m3X10mm screws like the original rev ex 2. Enjoy!!!
Feets for the Western Digital (WD) My Cloud EX2 Network Attached System. My original rubber feet got lost over time and they are very important for the cooling of the device by allowing air flow from the bottom to the top. Therefore I…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table…
50mm Fan holder for Filabot EX2 extruder without cooling fan. This will keep the hopper cool and minimize heat creep, so the Filabot can be used continuously. Just needs a 24V 50mm fan. Category: 3D Printer Parts
This bracket allows you to mount ThermEX to a din rail using Voron PCB din clips. More information about ThermEX can be found here: https://github.com/comradef191/ThermEX/releases/tag/ThermEX26-V1 Voron PCB Din clips can be found here:…
Replacement mounts I made since the front and rear rubber boots had both rotted away. Fit pretty good and allow the fitment of generic aftermarket blinkers. Any filament will work, but you may want to use something more UV resistant if…
I simply added a removable stopper. I am not the original creator.
Slide this piece in-between the two middle panels of your EX2 to hold it in place at 90 degrees. Printed with PLA, 0.2 layer height, 4 walls, 10 infill
Der Kühlsockel ist für die My Cloud ex 2 konstruiert worden. Da Der kleine Lüfter in der My Cloud es im Sommer nicht Schaft die Festplatten richtig zu kühlen. Dadurch wird das ganze Gerät Laut. Die Lüfter haben 80mm und sind 3 Stufig in…
This is base part of ball clock project. The base is big part, that barely fits my Ender 3v2 printer build plate. It tends to warp (when printing at the edges of build plate), I cannot add skirt nor brim and with 0.6mm nozzle and 0.24 the…
taliano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal , che sarà molto apprezzata. Questa è una scritta decorativa che puoi stampare in qualsiasi…
this is made to extend the back part of your APEX2 with the goal to hide the barrel underneath in case you like the look of that better. there are a view sizes 2, 3, 4 inch extensions. and for 2 barrel sizes 7/8 and 1inch thick. and it…
