31 models
Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…
Designed this for desk at work. It is designed after an A-Type Heat Exchanger Channel. The Filler Files slide into the pass partitions. You can scale them to allow longer or shorter items to fit into the pass partitions. I Assembled parts…
This is a bundle from a Heat Exchanger I am working on. I modified it for the Business Card display contest, but was too late. I have included a picture with locations of where I recommend putting supports. In my pictures you can see I…
Introduction I liked the air exchanger model from user gwg, but I thought I would be able to make some changes. I hope you find them useful. The top has been changed to a solid peice, and you must use a modifier to use hexagonal infill to…
A barebones heat exchanger core for air cooling and heating projects. Default size is 186x186x180mm. I haven't printed the bare exchanger, but successfully printed the pattern using carbon fiber filament inside 6in cylindrical ducting.…
Liquid heat exchanger I need to cool down a bunch of instruments and our laboratory has a primary cooling water circuit. Yet it is dirty and the pressure difference between the supply and return line is too low. In order to decouple my…
This is a heat exchanger for 6in ducting. As an example, I used it to temper incoming makeup air for a basement kitchen hood's exhaust. I printed using carbon fiber reinforced PLA. I don't have the equipment or knowledge to test the…
It is a smal part to fit in for design reasons. Print all parts in the given orientation (or as you see fit) No support needed. The big gap in the Base part works with a bridge. If you add a manual color change to the Radiator part, one…
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Hey! It's getting hot! Do you have one of those cheap-o mini-fridges that plug in to your car's power socket and keep all of one can of soda moderately…
Printed in PLA with gyroid facing downwards on print bed, no supports required.
Summary This fan holder is suitable for standard 80 mm PC fans. It allows you to click the fans into place on your refrigerator's heat exchanger. Thanks to the improved cooling, the compressor runs for less time to maintain the…
Customized version of https://www.thingiverse.com/thing:1919974 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1919974 Instructions Using the following options: pipe_inner_diameter = 8…
My dryer stopped drying after four years. After cleaning it, I decided to do something about it so I wouldn't have to go through this again. I couldn't find anything interesting in the pre-made models, so I designed my own attachment for…
I have often thought a fully automated version of RoboRally would be incredible. This is my first step on that path. I have converted the six boards from the 1995 version of the game into a static board. This is broken into four 6"x6"…
This file set lets you build a bite‑sized version of an industrial plate heat exchanger—ideal for classroom demos, scale‑model process plants, or just nerdy desk décor. The design has two end covers which clamp a stack of corrugated…
Layer height : 0.2mm Supports: Yes I am using esun PLA+ and it prints well
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB: https://github.com/MacNite/CorEssentials To built…
This part is prone to break on all Lancia Betas the white one) This specific one is modeled for the first series. You may need to slightly adapt the narrower part for fit with a file as the available space is very limited.
The Samsung tumbledryers equipped with a heatpump have a heat exchanger component that requires periodic cleaning. Samsung supplies a brush for this with a lovely suctioncup to attach it to things so you can be certain it comes falling…
I need more height to closer match my filament sensor and gantry as it raised during the print. The 5% exchanger vent is to help humidity escape w/o great loss of heat (per original designer).
you can print at 0.2 mm layer height total of 9 legs
This is an Intake/Exhaust Grille for standard air exchanger exhaust ports. My air exchanger kept getting cluttered with bugs. This cover is held on by friction and 8mm magnets. I've added mesh small enough to keep the bugs out if the…
I made this for our bearded dragon enclosure. We live in a cold climate so circulating fresh air all the time can make it difficult to maintain constant temps inside the enclosure. We already order these activated charcoal filters for our…
This clip is used to hold the flapper door of the air exchanger in place.
This is a heat exchanger for 6in ducting. As an example, I used it to temper incoming makeup air for a basement kitchen hood's exhaust. I printed using carbon fiber reinforced PLA. I don't have the equipment or knowledge to test the…
I made this for our bearded dragon enclosure. We live in a cold climate so circulating fresh air all the time can make it difficult to maintain constant temps inside the enclosure. We already order these activated charcoal filters for our…
Printed in PLA with gyroid facing downwards on print bed, no supports required.
