Alphacool Eisbaer Solo Mount and Heat Exchanger for Water Cooled Hotends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB:
https://github.com/MacNite/CorEssentials
To built this exact setup you will need:
Alphacool Eisbaer Solo
some M3 screws
60x25mm fan
G1/4 mounts for your choosen tube diameter (for E3D that would be G1/4 to 4mm OD Tube)
LED heatsink like this, needs to be cut to size
The general concept of this cooler / heat exchanger is really simple:
ALPHACOOL Eisbaer is an all in one solution as a Reservoir, Heat-Exchanger / Heatsink and Pump. The LED heatsink and fan are just there to increase the performance. I have also used the ALPHACOOL Eisbaer only mounted to a metal plate of other 3D printers. But obviously this becomes quite in-effective if you use a closed chamber and everything may heat up.
As an additional inspiration you may have a look at the Sparkcube EDGE by Sparklab:
https://the-sparklab.de/sparkcube-edge-255x175x400/
If there are any questions / uncertainties feel free to ask them in the comments.
Print instructions
Category: 3D Printer Parts