100 models
Crank case puller to get at that starter or alternator. Remember to drain the oil first and use a mallet to tap the case progressively as you increase tension. There are a few recesses on the case where you can lever the case with a screw…
Print approx. €14.12–€17.26 excl. taxPreliminary estimate for PETGSource material: PET
Bracket to mount a D5 Pump/reservoir (cylinder) to a Maxnomic SeatQuake plate
Print approx. €4.56–€5.58 excl. taxPreliminary estimate for one variant
I made it a ergonomic fan case for fire tv, i used a regular 5v, 30x30mm fan and M2 screws, you can power by a usb. For assambley, just remove the original case and slide inside i the box, fix the board with hotglue or something and put…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for PETGSource material: PET
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…
ONLY FOR PEOPLE WHO OWN 3D PRINTER AND/OR ENTHUSIAST WILLING TO TRY NEW STUFF MAKE SURE ALL VRM COMPONENTS HAVE INDIVIDUAL HEATSINKS (ALTERNATIVELY STOCK HEATSINK CAN BE TEARED APART AND USED FOR THAT IF YOU KNOW WHAT YOU ARE DOING :-) )…
Be careful when making candles, hot wax can burn you. Printed parts: Form 2x Clip 2x Bottom 1x Wick holder 1x (not necessary) Don't forget to turn off top layers and infill for the top of Form part. Use the modifier as shown in the image.…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
This is an adapter plate to retrofit a single DIN sized head unit into a vintage aircooled VW with dash trim. When I got my '74 Type 1 a couple years ago it came with a hacked up dash with a CD player shoved in it. I could have welded in…
This is an actively cooled case for raspberry pi Zero 2 W. With room for a 30mm fan and heatsink. This will allow you to run more intensive computations on the Zero 2 W, like video streaming etc. over longer periods of time. OnShape:…
Dear fellow maker, Thanks for checking out my (first) post! As you already saw - This is a mount for the standard 19 inch server racks. It houses 2 Pis and is enables you to overclock these with no fear about overheating from not enough…
This is a model I modified from https://grabcad.com/library/turbine-blade-m88-rafale-aube-de-turbine-de-rafale-m88-1 . I made it in to parts to make it easier to print, and also provide a better experience from those who want to learn…
Zundapp KS(GTS)50 year 1981 water-cooled Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
I've seen stuff like this for sale online but didn't want to wait for them so I took the time to reverse engineer and test fit. I did 100% infill ASA and included my orca slicer project files for an Ender 3 V3 Ke. PETG would work though…
ZWO Cooled Camera Holder 78mm with Guide scope and Accessory Holders Fits many ZWO cooled cameras and others with an OD of 78mm like the ASI533MC and ASI294MC, then simply attach your DSLR lens to the front with the appropriate adapter. I…
Hi, Thanks for viewing! If you end up using this it would be great to see any makes! One quick note - With this design the power cable must be fastened down to avoid catching on the bed level knobs (I just used some tape to attach the…
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera This Tri-bahtinov mask will fit C8 or Edge HD8 in the Hyperstar configuration with out having to remove the camera. outer diameter is 203mm…
This is a 3D modela of a E3D Chimera CLONE.The clone is based on the original model and all the part dimensions shuld be the same. The project was drawn in Autodesk Inventor 2021. List of parts for E3D Chimera: -Bolt 2.8mm(length) -Bolt 4…
All parts are made from 7075 aluminum, except for the fanduct, which is 3D printed in aluminum. The cost for one full set is around $250, excluding shipping and taxes. All threaded holes are M3 and tapped using a blind hole tap. It's…
I really love the Opticooler on my Wanaho i3 v2.1 so I thought why can't I use it on my BX? So I started to tinker with a remix and found the MAD system. Was a perfect match. It's not really in the spirit of the MAD mod. I changed the…
a modded version of armchair engineerings archetype hotend mount to fit water cooled goliath
this is only a prototype , you can print or develop and pulish a make!!!
This plug/cap fills the original heater ducting off from the fan shroud of an air cooled VW Type 1 Beetle engine. The plug end is tapered slightly to make it easier to press into the duct for solid engagement with the edges of the hole.…
This DJI FPV System camera unit and air unit enclosure is actively cooled and specifically aimed at ground FPV enthusiast where there isn't going to be enough airflow to properly cool the Air Unit. The unit is cooled by two 40mm fans (5v…
A two part enclosure/case for a Raspberry Pi 4 incorporating a mounting for a cooling fan - with an additional separate fixing bracket for a custom PCB that controls the fan. 6mm M2 self-tapping screws are used to secure the Pi 4 into the…
This ice cooled can holder is perfect for any summer outing, just fill with water through the hole in the top of the handle a couple of hours in advance, freeze, and just put in a can for that perfectly chilled beverage. Even once melted,…
Based upon a previous design for a Raspberry Pi 4 (see here ), this is another two part enclosure/case now sized for a Jetson Nano dev kit, incorporating a mounting for a cooling fan - with an additional separate fixing bracket for a…
A quick modelisation for the Trianglelab Matrix extruder Liquid Cooled, based on The Hemera model is from "E3D Hermes / Hemera CAD (V6&Volcano)" https://www.thingiverse.com/thing:4025946 Print Settings Printer: hypercube Rafts: No…
BigBox Water-Cooled Titan with MGN12 Linear Rail. E3D Shopping List. 1 x Water-Cooled Titan. 1 x Volcano Starter Pack . 1 x 40x40x20 Blower Fan 24v . 1 x 16T GT2 Pulley . 3 x Metre GT2 Belt . Print with your favourite thermoplastic |…
Our 2.2kW air-cooled square spindle from "Rattmmotor" on one of the CNC machines at Stockholm Makerspace had lots of problems with running super hot on lower speeds, since the small impeller-style fan is running directly of the spindle…
Raspberry Pi Skeleton Fan Cooled SSD Caddy Suits Pi 3B, 3B+ and 4B Spider style top with centre mounted 30mm fan mounted on top of the Pi sitting above an SSD Caddy. The Spider top is supported on 4x 3D printed 16mm high vertical support…
Edit 27/01-2025: Added new and revised files after some extensive testing. Duct and mount for 3DO nozzle Cam V2. 8 x M2x8mm selftapping screws, 2 x Heat set inserts (Voron kind) and 2 x M3x6mm BHCS screws required. Also, if using the…
This is a replacement cap for the common aftermarket oil filler tube on an air-cooled VW engine. The threading is M46x2.0mm. Depending on which filler neck you have, you may need to scale the X and Y axis. This should fit on the 45 degree…
Vixen-style dovetail mount for non-cooled ZWO ASI cameras. It is remixed from jamesdedij's excellent ZWO filter holder. Printable in two parts, 2pcs. M5*30 screws are needed to join the parts. I also added some epoxy. I decided to split…
This DJI FPV System air unit enclosure is actively cooled and specifically aimed at ground FPV enthusiast where there isn't going to be enough airflow to properly cool the Air Unit. The unit is cooled by a 40mm fan (5v in my case). The…
I drive a '71 Brazilian 1500 VW bug. It was stock 1493cc with a single carb, but I did some upgrades to its engine (changed from single to dual carbs, upped the displacement to 1584cc and added Engle W100 cams). One of the premises I…
The Classic Aircooled Coupe is a highly detailed 3D model inspired by vintage, rear-engine, air-cooled coupes with a custom restomod appearance. Featuring smooth, rounded body lines, a lowered stance, and a detailed rear engine and…
Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…
When I found out about Trick Laser's nifty ball-cup Kossel arms with plastic barbells to guarantee arm spacing and reduce joint lash (see http://www.tricklaser.com/ ), I was immediately intrigued, but I needed an effector to use them with…
A Quick and dirty mockup of the 65mm Chinese router spindle I used in my CNC router. Step file included.
I needed a housing with fan for a voltage regulator. So, here is one. The housing fits a "XH-M411" (at least that's what is printed on the bottom of the circuit board) Amazon Link:…
The bosh is 3.5" Diameter this will reduce it to 80mm
Hello everybody, my latest project is an SFF computer with a volume of around 7.4 liters. The hardware components currently installed are not the best, and I plan to upgrade at least the GPU in the near future. Specs: MSI B450I Gaming…
In my gaming PC I had to mount the liquid cooler fans slightly spaced from the radiator body. To avoid wrong airflow I printed this spacer to make sure all the air went through the radiator. For best results, this gasket should be printed…
I wanted a super small case for my RD6018 power supply that had a built in step-up converter but also allowed for direct input. This way i can plug a battery into the power supply and use it remotely as well. The components i used: The…
This DJI FPV System camera unit and air unit enclosure is actively cooled and specifically aimed at ground FPV enthusiast where there isn't going to be enough airflow to properly cool the Air Unit. The unit is cooled by two 40mm fans (5v…
This is a drop in replacement for the stock air cooled heatsink for the heat break of an ender sprite extruder. The actual heatsink and cap have to be made out of metal preferable aluminum which is what I made it out of. The gasket I…
Remixed the Hardkernel ODROID-XU4Q passively cooled case with 4 screws in the top and bottom as per a request on Reddit. Category: Electronics
DE: Gehäuse für eine Wassergekühlte PS4 Hier zum Projekt Video: https://youtu.be/dYaawz0kWII EN: Case for a watercooled PS4 Link to the project video:
I made this as although I have a bought tool to split the front of the case that sits in the void of the oil pump, I always find splitting the case at the back to be a pain. Printers on a Qidi Plus 4, PETG and a 0.6mm nozzle. 0.35mm layer…
…в местах с большой нагрузкой вдоль резьбы используются закладные гайки, в остальных резьбовые инсерты. при SLA печати их лучше всего устанавливать после промывки, перед засветкой. При FDM печати закладные гайки вообще нафиг не нужны,…
When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…
This is an experiment to water-cool a qu-bd MBE extruder. It is designed to mount directly on an ord-bot hadron carriage, but could be mounted on almost any printer. It will need a bowden drive to feed the filament. It uses a GPU heatsink…
Einsy part is no longer supportless and you will need 8 pcs of M3 x 30 bolts. Swap is not easy, but doable withour disconecting the board
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB: https://github.com/MacNite/CorEssentials To built…
This is a cooler module for a 3D printer with multiple liquid cooled hot ends. The design is based readily available and inexpensive 80mm radiator, 80mm fan and 12V BLDC water pump. There is sufficient space in the enclosure to fit some…
**DISCLAIMER: Do not print with low temp plastics, and do not run without water cooling. This goes without saying, but the tip of the iron gets hot and could easily melt the plastic grip and become a fire hazard. This is meant to be…
Simple and cheap 10w flashlight that fits 3x18650 cells but is also usable with any other lithium cells you might have around. No cells in series so you can just throw in any cells that fit inside. Mine is printed from recycled plastic,…
Fusion 360 and step files of the Triangle Labs water cooled BMG clone and assembly with a V6 and 25mm stepper. It's based on the limited TL drawings and my own metrology with calipers, so things might be off by a tad. Mounts and fan ducts…
Epoxy used to seal the electronics. Alu cooler, made on CNC. Printed sealant from TPU and the rest is from ABS to kind'a hold the temperatures.
OK, this might look like a bit overkill, i know… It's just i need my phone to be cooler as it's been on for like 10-12 hours a day while i'm working. So, i'll upload 2 different versions of the files, ones are for the thinner version in…
I needed a way to cool both my ADSBex dongle and RPI Zero 2W so I designed this box, with a Noctua 60x25 5 volt fan in mind. My Pi's operating temperature dropped from 57C without a fan, with a small heatsink, to around 30C with the same…
I did not find any cheap, but powerful flashlight to buy so i made one myself. Total price is about 5-8 euros if u have some spare lithium cells around. I used old laptop batterys so the runtime for my flashlight is around an hour or so…
Liquid Cooled PC with no hard drives - running off motherboard nvme setup. 4x 2020 Aluminum Extrusions 1x Acrylic Sheet I have uploaded all the parts to share with the community and see if these can be improved upon.
Mount a Raspberry Pi4b with a passive cooling case to a Prusa Mini Rail. The cooling as is a GeekWorm Pi Armor case.
A remake of the original Prusa Rambo base. Reinforced with locations for cable ties when using lights and other accessories. Cooled with the use of a 45mm fan. I would recommend the use of plastic bolts for the mounting of the fan to…
A case i made for the common cc-cv step-down psu. Link for the one i bought. https://www.aliexpress.com/item/32888919328.html?spm=a2g0s.9042311.0.0.27424c4dWujpWg Or this (cheaper shipping for me): http://s.click.aliexpress.com/e/_d84C1Li…
This is a dumb project I've wanted to make since forever, it attaches to a standard garden hose for cooling. The center tube is intended to be filled with solid rocket fuel. It has quite a few weak points, which is why it's probably…
A forced air cooled shunt made out of 100W resistors. An optional USB-C trigger board with a 3A buck converter can be used for power supply. So you have all your "good" power supply outputs for your circuits. All typical AliExpress stuff.…
Extension power hub for ZWO cooled cameras Features: Second power port ex. for EAF On/Off switch for camera dew heater BOM 1x PCB on EasyEDA 1x Vertical Slide Switch SS12G08-G10 1x Metal 5.5x2.1mm DC Power Male Plug Jack 1x 22k axial…
you can print at 0.2 mm layer height total of 9 legs
I used it as PETG, 60% infill as per the original maker. Model was modified to fit a m4 hex cap screw and the m4 nut flush into the mount. I used https://www.amazon.com/dp/B0DCVVSGW2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 (Screws / Nut)…
IMX 290 ASTROIMAGING CUSTOM PASSIVE COOLED CAMERA BODY has a slit style intake for passive cooling.
This is a remix for the BLV mgn Cube. Some Parts of the X-Carriage are changed to mount a chimera+ watercooled version. You have to reprint the Rear Plate, the Front Plate, the Bottom and the Twin Blower Shield. Everything is kept quiet…
I added some additional vents to the original model of WD Elements Enclosure Thanks @TrasherHT for his model.
A solar powered Heltec T114 with active air cooling and a 10,000mAh battery. The fan will activate automatically when the case heats to 40℃ and turn off when cool. Named 'Immortal' because it can go months on a single full charge. This…
I recently water-cooled my PC in a meshroom V2 in a dual rad setup and even with slim fans on the side rad the clearance between the GPU blocks and the slim fans wasn't great, it was definitely enough for air to flow and move but the slim…
This model will need to be printed with supports on the build-plate only, everything else is an achievable overhang. Printed with PETG on my MK3S+. This also has a mount and duct for a 3010 fan of whatever voltage, i recommend a 3010 but…
The linked wireless charger (https://chargie.org/product/chargie-supercooled-wireless-charger-us/) comes with a mount designed for car air vents, which works well for that purpose. However, this setup is not practical for home use, as the…
Remixxed SB fto mount the watercooled cyclops hotend. Ofsets x: 4mm y: 3mm Not fully tested yet. More info follows soon,… Hardware other then regular verion 1x 25 mm m3 1x 30mm m3 2 x 8mm m3 Countersunk
Small insert to fit between the passive heatsink fins on a micro PC
A simple enclosure with a cooling system for an mSATA-to-USB adapter. A 2507 fan operating at 5 V is used for cooling.
This tool-less, screw-free mount is designed for a lightweight nominal 62 mm uncooled ZWO ASI colour camera on the bare fixed 40 mm upper leg of a ZWO TC40 tripod. The STL files have passed digital mesh validation, but the complete camera…
Splunk Edge Hub Battery Cooled Case A purpose-built enclosure designed to house the Splunk Edge Hub with integrated active cooling and portable battery power. This case provides thermal management and remote power for reliable edge data…
Strain relief bracket and fan bracket (the 2 x white pieces in photo) specifically designed for the Creality Ender 5 with Watercooled Hot End Upgrade and BLTouch, but may work with other models. May need slightly longer 3mm screws to…
Archer C7 Cooled Case 26 Oct 2026 · chrisf4lc0n Why? This is a fan-cooled replacement case that brought a dying TP-Link Archer C7 back to stable service instead of the bin. It comes in two designs: ceiling/wall mounted and standing. My…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
This removable water-cooled 45 mm blade guard is designed for the Proxxon LWB to make cutting cleaner, more controlled, and more practical in real use. What it does guides cooling water directly into the cut helps cool the blade where it…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
This removable water-cooled 45 mm blade guard is designed for the Proxxon LWB to make cutting cleaner, more controlled, and more practical in real use. What it does guides cooling water directly into the cut helps cool the blade where it…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
This AC duct will direct AC air directly into the fan underneath the seat. Fits 2006-2011 Lexus GS Results will depend on on your seating position and your AC blowing speed. For best results put your AC direction to the legs. You wanna…
