Active Cooled Converter casing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this model to mount to 3030 extrusion and house a small 24v to 5v converter harvested from a car USB charger
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This model will need to be printed with supports on the build-plate only, everything else is an achievable overhang. Printed with PETG on my MK3S+. This also has a mount and duct for a 3010 fan of whatever voltage, i recommend a 3010 but you can use any 30mm fan. I have used some printed M3 drop in t-nuts and some M3x15mm socket-cap screws for mounting of the casing itself and i used 4 M3x12mm socket cap screws for the fan itself.
You will have to drill out the fans mounting holes as well as im not that good at 3D modeling just yet. I used a 3mm drill (or a 7/64) and the screws will cut there own threads on the way in
INSIDE DIMENSIONS: L=45mm, W=15mm and D=23mm
T-NUTS: https://www.printables.com/model/116299-insert-tnut-for-3030-alu-profil/files