BIQU BX H2 cooled by Opticooler gone MAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's not really in the spirit of this mod. I changed the base, to be able to use the Opticooler.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 78
- Makes
- 4
- Views
- 978
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really love the Opticooler on my Wanaho i3 v2.1 so I thought why can't I use it on my BX?
So I started to tinker with a remix and found the MAD system. Was a perfect match.
It's not really in the spirit of the MAD mod. I changed the base, to be able to use the Opticooler and I added a slot for an connector.
The OptiCooler source can be found here https://www.thingiverse.com/thing:2927210
- No support is needed for any of the parts.
- PLA works as longs as you don't have the printer in a enclosure.
- Do not need to turn around the motor(BIQU BX)
- Same as the MAD original you need a extender for the screen. (BIQU BX I used 40mm )
- You need to bend/move the cables and bend the led to fit the inner funnel.
- Same as the MAD you need heated inserts M3x5.7
Removable funnels,
if you don't need cooling just remove the funnels
If get a bad print the funnels will break off and you will not get a big bal of filament
Connector:
Add it so it's easier to change the fans if they break down.
Remove the first layer for the connector channel after print.
Edit:
2023-05-14: Added step files