BIQU BX H2 cooled by Opticooler gone MAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's not really in the spirit of this mod. I changed the base, to be able to use the Opticooler.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 78
- Wydruki
- 4
- Wyświetlenia
- 978
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really love the Opticooler on my Wanaho i3 v2.1 so I thought why can't I use it on my BX?
So I started to tinker with a remix and found the MAD system. Was a perfect match.
It's not really in the spirit of the MAD mod. I changed the base, to be able to use the Opticooler and I added a slot for an connector.
The OptiCooler source can be found here https://www.thingiverse.com/thing:2927210
- No support is needed for any of the parts.
- PLA works as longs as you don't have the printer in a enclosure.
- Do not need to turn around the motor(BIQU BX)
- Same as the MAD original you need a extender for the screen. (BIQU BX I used 40mm )
- You need to bend/move the cables and bend the led to fit the inner funnel.
- Same as the MAD you need heated inserts M3x5.7
Removable funnels,
if you don't need cooling just remove the funnels
If get a bad print the funnels will break off and you will not get a big bal of filament
Connector:
Add it so it's easier to change the fans if they break down.
Remove the first layer for the connector channel after print.
Edit:
2023-05-14: Added step files