Well cooled double rack mount for Raspberry Pis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a (maybe slightly overengineered) 19 inch 1 HU rack mount for two RaspberryPis.
- Rating
- 4.667 / 5
- Likes
- 55
- Downloads
- 246
- Makes
- 4
- Views
- 2,090
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Dear fellow maker,
Thanks for checking out my (first) post!
As you already saw - This is a mount for the standard 19 inch server racks. It houses 2 Pis and is enables you to overclock these with no fear about overheating from not enough air movement.
Generally, this should not be a very complex print. All parts are printable on a MINI(+).
The only part that might require some support is the fan blower mount.
Additionally required:
- M2 screws and nuts for mounting the cage
- M3 screws and nuts for putting together the front plate parts
- LEDs for the Pis (Cutout size: 5.1mm)
- A momentary switch / button for the reset capability of the Pis (Cutout size: 7mm)
- 40mm 5v fans for blowing air onto the Pis (I use the Noctua ones, Cutout size: 40mm with 3.5mm roundings on the edges)
I hope you find this as useful as I do.
There is a Remix for a front plate for raspberrypi 4s - Go check that out! https://www.prusaprinters.org/prints/74703-frontplates
As the Time passed by I got more pi’s. So here is another try to make more pi’s fit in less space! https://www.prusaprinters.org/prints/75748-many-pi-rackmount
Happy making!