82 models
A funny desk item that is ideal if you have annoying work colleagues that disagree with you on everything. Printed in PLA with color change enabled in Prusaslicer. Grenade prints in several parts only the top part will need supports.…
Inner cylinder for gifts: 50mm x 95 mm Ultimaker S5: PETG (black) Breakaway 0,2mm layers 30% fill 0,8mm walls
As I am a huge fan of Garfield I wanted to recreate the classic scene of Garfield resting in his bed with his beloved Pooky by his side. There are only a few “constants” throughout my life - Garfield is one of them, and I love him dearly.…
Edit of VoidstarLabs' storage for sockets. Smallest size fits 12mm diameter sockets. The universal is just 12mm holes for various socket bits similar. Made for the following kit specifically, however the universal storage has a lot of…
Hello here is a protective box for antenna vector analyzer RigExpert Stick Pro in 2 parts: lower part for the rigexpert ,upper part for the connectors with a separation maintained by 6 magnets 6mmx 2mm. box with hinges and locks , and…
Simple phone holder for Peugeot Expert Traveller, Citroen Spacetourer and Toyota Proace. Intended for bigger phones, but the smaller should still fit in without falling out. Inspired by some other holder from Thingverse which was not…
Modified Version of the housing for the Labirinth Gift Box (Expert). Has looser clearences and an arrow to poin where in the labirynth you are. The image presented is in low quality and i apologize, the model was printed with 0.12 layer…
Damit kannst Du deine Schleifschwämme (ich habe diese hier: https://amzn.to/3b4Nq17 ) organisieren und den Halter z.B. an einen French Cleat Halter montieren. Die Schwämme sitzen perfekt und können vorne mit einer Hand rausgezogen werden.…
Incorporating horizontal and vertical zig-zags this puzzle is designed for parrots that need an extra challenge. Orient the exit at the top of the maze for an even tougher puzzle. Part of the parrot maze puzzle collection. Requires the…
I remixed Charmand06's holder to use it with Lavazza Blue and Expert capsules. No supports needed. Category: Kitchen & Dining
A dummy keyboard model with clickable keys and a super-fake microphone hole, for all of you ChatGPT experts out there! Multi-colored model printable both on an MMU3, as well as on a plain Prusa with no MMU (using just 3 manual filament…
BOM: 2 Z809 ball bearings Multitool digital thickness gauge (model here) Instructions: print the left and right tools print 2 pins attach the tools to the Multitool digital thickness gauge use the device: Checkout a similar tool without…
This is a hard shell case for the RigExpert AA Series of Antenna Analyzers. Keeps it protected in your Field Kit.
Remix of the "Schleifschwamm-Halter" for Multiboard . You need two MultiConnect connectors, e.g. Multiconnect - Board connectors_Multiboard big, laying down , vertically.
Laufgewicht für eine Heckler & Koch USP EXPERT. Könnte sein, dass die Konstruktion auch an andere USP Modelle (Standard, Custom Sport, Tactical, Elite, P8) passt. Probieren, jedoch keine Garantie. Das Innenleben besteht in diesem Fall aus…
Maniglia per l'apertura del portellone posteriore del furgone Fiat Scudo, Peugeot Expert e Citroen Jumpy prima serie
I designed a TPU/TPE insert for the RigExpert Match that fits in the Rugged Box (Parametric) by Whity . The insert will fit the Match unit and 8x adapters for the type-N connector on the unit. Settings for Parametric Box: (see attached…
Držák pro ráčnu a kardan (kloub) gola sady Tona Expert https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami. Tištěno na Průša PETG. Vnitřní čtverec držáku kardanu je 12x12 mm.
Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high. In the slicing…
This is a case for the Rig Expert AA-30 Zero hat that goes on top of an Ardiuno Uno, it has a keypad and display. Here is the link to the keypad and display…
Welcome to our Flowrate Calibration guide! Here you’ll find everything you need to accurately measure and adjust your printer’s flowrate using our browser-based Flowrate Calculator. The calibration models (STL & 3MF) are already…
This intricate puzzle is a small testament to engineering ingenuity. With its spinning mechanism and little handle, it beckons you to engage in a rhythmic dance of spin and movement. Navigating this challenge is not an easy task; numerous…
I created an extended cap for the RigExpert Stick analyzers that works with the SO239 adapter attached and has a loop that allows you to keep it tethered to the bottom loop on the analyzer. There is a little bit of a lip that doesn't…
This is one of six level trophies I created : beginner, learner, intermediate, expert, master, and grand master. All of these are my own ranking. You can decide when you want to get these for yourself or someone else. Beginner is for…
Customizable 3D printed wrist rest for Kensington Expert Mouse trackball The wrist rest that came with my Kensington Expert Mouse broke, so I designed and 3D printed my own. Customizing The version in the repository is made to fit the…
This is a connector piece that holds the wrist rest to the trackball for the Kensington Expert Trackball Mouse. This model appears to work for the wireless version of this mouse as well. I'm sure there are ‘better’ solutions, but this is…
il faut 2 vis de 4x10 pour l'installer il faut enlever un tiroir et installer les vis par cet endroit s'est la seul solution que j'ai trouvé n'oubliez pas le calcul de rétrécissement de la pièce suivant quel matériau vous utilisez ou si…
I have created an upside-down-stand for my L'Oreal Men Expert roll-on deodorants. The cap is round and without this stand, 20% deo remains in the roller and are thrown in the garbage. Print time is around 1h and there is nothing special…
All other painting handles I could find was too cumbersome to use, and required rubber bands to hold the miniature. They were also too wonky when the miniatures is attached, and the miniatures can slide out. Even the store-bought once…
Držák pro ořechy 8-14 mm gola sady Tona Expert. Vytvořeno pro sadu https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG. Rozměry…
This will not fit small print surfaces. You may need to adjust the orientation on your printer to fit. The remix includes three of the universal hooks required to hang it from the skadis board.
Repair cage seat lever knob suitable for Fiat Scudo/Peugeot Expert/ Citroen Jumpy - Gabbietta di tenuta Riparazione Leva Regolazione Sedile Reinforcement sleeve / slip-on repair cage for seat adjustment lever – fits directly over the…
Printed with 10% infill though you might get away with even less. Might be scalable for different kinds of roll-on types. The round part measures 50.5mm.
Držák pro ořechy 15-20 mm gola sady Tona Expert. Vytvořeno pro sadu https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG. Rozměry…
This is a protective box for the RigExpert Zero II antenna analyzer. If you print the box flat on it's bottom and the lid with the letters on the build plate then no supports are necessary. Feed the Zero II antenna connector in first and…
This nozzle holder has 3 swappable bases with 1, 2, and 3 rows of nozzle slots. Right now I've created two signs that press-fit into the base. The dots underneath the numbers on the signs are to help identify E3D nozzles which use a dot…
Držák pro ořechy 21-25 mm gola sady Tona Expert. Vytvořeno pro sadu https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG. Rozměry…
This version of the 3DAiexperts Skirt Button PCB have the hex pattern infill, to match my other hex infill skirts.
Držák pro vratidlo a nástavce ½" gola sady Tona Expert https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ kratší nástavec (není součástí sady…
This is a keychain with a EXPERT text and also its my second made 3D model. :)
Držák redukcí pro gola sady Tona Expert pro děrovanou stěnu. 3/8" > ½" https://www.tonaexpert.cz/redukce-a-adaptery/redukce-3-8--na-1-2--ctyrhran-tona-expert-e117366/ ½" > 3/8"…
Seat bar tailpiece for Peugeot Expert Traveller, Citroen Spacetourer and Toyota Proace. The original broke fairly easily. To remove the bar from under the seat, it is necessary to apply adequate force (the bar is springy) and to remove…
Over the years, the fastening clips on the covers for the headlights become brittle. These wedges can be used as a replacement to close the cover firmly and watertight again. The wedges are suitable for Peugeot Expert and Traveller from…
Used the design from @stanoba and adapted it to have space for 15mm thick tapes. Also widened the the open window so it matches for our usage on our manual PnP machine Powatec Expert II . Added a baseplate which slides on the base plate…
Držák pro ořechy 26-28 mm gola sady Tona Expert. Vytvořeno pro sadu https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG. Rozměry…
Key Ring "I'm not forgetful, my keys are just expert hiders." Easy Print
Pesky Battery cover replacement, for when the original grows legs. kensington expert mouse battery cover
Relies on the original Kensington Expert bracket, this slots into that bracket and the two notches on the ploopy adept. Can be printed with no supports (it just has two small straight overhangs). Increase walls to 4 or 5 for some strength.
Držák pro ořechy 30-34 mm gola sady Tona Expert. Vytvořeno pro sadu https://www.tonaexpert.cz/1-2-sady/gola-sada-1-2--28-dilu-tona-expert-e032939/ . Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG. Rozměry…
Following a mishandling, I broke the guide of the security spike of my Magimix Cook-expert. I remade a piece from the broken parts found. The model was made under Partran and meshed in Nastran format, then converted to STL format with…
- Use PETG or ABS. Don't use PLA. - Create support for holes. - Glue the handle after printing.
Air Vent Control Slider for Peugeot Expert – 3D Printable Replacement Part A custom-designed replacement slider for the air ventilation control panel in the Peugeot Expert. This model was created to replace the original part, which often…
Case for RigExpert + Arduino board which features a micro usb port instead of USB-A port on a regular Arduino Uno. Features some slack for the Arduino board inside, as the D1 ESP8266 board I have is a knockoff and is half a millimeter…
Cable routing for GT Expert Bicycle, also works for other bikes, recomended Material ASA
I've been using Kensington trackballs for the last 30 years, and they do eventually wear out. The biggest shortcoming of the modern ones is (as always) the use of rubber overmolding. The rubber on the scroll wheel eventually turns to…
Gridfinity base for the RigExpert Stick analyzer
English description below Ceci est un petit remix de la modification publiée par Petit_Homard_Breton pour la Dagoma DiscoEasy 200 Il s'agit simplement de couper une partie de la fixation de l'axe X (coté moteur) qui empèche la tête du…
Size: 4x3 Height: ~4U, ~6U with charger
Wanted to put my FH-2 in a Intellijel Palette 62Hp case to keep my ER-301 and Teletype company. I knew going in that the FH-2 would be to deep to fit, but knew I could make a riser for it. Had to do a little tweaking, but this seems to be…
Simply shadow board for easy identification of screwdrivers at wall. Printed on Prusa Mk3s
Jak už jsem výše zmínil, jedná se o soklovou lištu k plovoucí podlaze z MDF. Pro tohoto výrobce lišty není v ČR možnost zakoupit tyto montážní klipy, proto jsem si navrhnul svoje. Tisknul jsem je zatím jen z PLA materiálu, bílý je…
Game pieces for the Pokemon Trainer Expert Game Image shows an OEM one and the (black) 3d print version
Description: Spread holiday cheer with this jolly Santa Claus cookie cutter! Perfect for 3D printing, this cutter creates delightful, Santa-shaped cookies with ease. Its smooth, continuous edges ensure clean cuts, while the simple yet…
The Math Avoidance Expert nametag is the perfect thing to have on your desk. If you don't like math this will let everyone know you do not like math. Also if you are in school and your math teacher is strict she will love it if you put…
Simple mount to hold Expert Connect 9-Channel HDMI Multi-Viewer. Designed to be attached with adhesive.
allows you to store a set of “bost expert micro torx” T6-T7-T8-T9 ref 648910 no support needed of course, 2X3 gridfinity I added a pause to print numbers in white at layer 47 on my neptune 4 plus, printed in 1h30 with a 0,4 noozle.
The Kensington Expert Trackball mouse pad that makes it horizontal and has space for a soft cushion/wrist pad. The model can be tuned in the the original FreeCAD source. Personally, I printed it twice (the first one didn't have place for…
Here is my slide on/off sun shade for my TomTom Go Expert 7" Designed to slide on and off. I scanned my TomTom and created this shade in fusion to fit perfectly around the screen. Printed in ASA on Anycubic S1 Be sure to add tree supports…
needed our logo company to be behind us when we do video call. Result is pretty cool with 2 files: support for the letters in white logo with all letters that can be used with the support or stick to any surfaces
Creator Expert Ferrari F40 wall mount
allows you to store your favorite bost expert micro screwdriver in a 3X1 gridfinity grid. Holes are a bit loose for the blade, but it's working anyway. Happy printing
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
Gridinfinity bins for 2 or 3 Bosch Expert 18V 4.0h batteries.
Wether you build antennas or just tune them for use, an antenna analyzer is a useful tool. Over the years, I've owned several, including units by MFJ and Comet. I've also tried Nano-VNA, which are fine but have a steep learning curve.…
My button broke at the hinge, and instead of buying a new vacuum cleaner, I tried to CAD out to new button. This is one of my first parametric designs and hence the angle of the button's "swoop" does not match the original, but it does…
🇩🇪 Ich war zu faul eine komplette Box zu designen, also habe ich einfach den Originaldeckel einem 3D gedruckten Deckel ersetzt. Ist robust und sollte doch einige Zeit halten. 🇬🇧 I was too lazy to design an entire box, so I just replaced…
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
This is a hard shell case for the RigExpert AA Series of Antenna Analyzers. Keeps it protected in your Field Kit.
This is a logical puzzle game of hard difficulty. The goal of it is to put the ball in one hole, so that it pops out of the other. You solve it, by turning the cube, so the ball inside moves along the path. It can be played from both…
![Parrot Puzzle Maze: Pepper's Lament [Expert]](https://media.printables.com/media/prints/94662/images/971680_177ca13c-3d2c-454f-ab44-72b8ce05ac43/large_display_pxl_20210611_101458929_94662.jpg)
