779 models
Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Extension for the Delonghi Eletta Explore. The extension has small hooks and thus holds securely. However, I recommend an additional extra attachment with tape (no one wants to pick up all the beans from the floor ;) ). No support…
Print approx. €5.34–€6.52 excl. taxPreliminary estimate for one variant
Experimenting with color changes during 3D printing so I made a paper bomb / explosive tag like you would see in your favorite ninja anime. I'll post the make when it is done too! Use it in a costume, take awesome photos, “blow up” your…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Space Port Exploded Power Station Module They've struck again. You looked away for a moment, your attention wandered, and now your people are going to suffer. Brownies don't taste nearly as good cold. The lights are off and people have…
Print approx. €11.00–€13.45 excl. taxPreliminary estimate for one variant
Bonjour à tous. Je vous partage de quoi faire des parchemins explosifs tiré du manga Naruto … qui n’explosent pas … désolé …. Dessin trouvé sur le net. Pour la modélisation, j'ai fait avec Paint 3D pour retoucher l'image et séparer les…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
Insert for Exploding Kittens ( https://explodingkittens.com/ ) card game. It may be used as draw / discard pile tray while playing the game.
Print approx. €5.42–€6.62 excl. taxPreliminary estimate for one variant
EN: 2WD robot explorer, with improved laser distance sensor. Driven by Arduino UNO. Manual to build is attached as pdf. Also Arduino ino code. Known issues - sometimes, robot is not going direct - because motors are not synced in the same…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Owning a Prusa Mini+, I have always been frustrated by partial and full nozzle clogs because you have to take the bowden tube off to do a cold…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Its a small C4, it needs to be painted. The G-codes are for a Ender 3 Pro.
Print approx. €7.46–€9.11 excl. taxPreliminary estimate for one variant
A fridge magnet or plaque with an amusing text which says "I'M NOT ARGUING I'M JUST EXPLAINING WHY I'M RIGHT" I've included the colour change .bgcode made with PrusaSlicer
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is the wall cup / door frame socket / anchor (they seem to go by different names) that the child / pet gate slots into. We purchased a Northstates Toddleroo Supergate Explorer which comes with 4 wall cups and 4 self adhesive pads to…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
explosion plate sign
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Wall hanger for your guitar straps. Works with both Schaller and Dunlop strap locks, as well as just a standard strap with no lock. Two color print. Attach with good double sided tape or you could use small screws through the strap button…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
This printable inner waste bin is designed specifically for the DeLonghi Eletta Explore coffee machine. The original grounds container cannot be washed in the dishwasher and easily builds up coffee residue over time. This insert offers a…
Print approx. €3.91–€4.77 excl. taxPreliminary estimate for one variant
I didn't like how the drawers fell right out. I'd prefer some catch, and since the top goes on separately, it's a perfect opportunity to do something like this! Version 2: The one where I actually apply volumes and remove the duplicate…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Space Port Exploded Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer not…
Print approx. €19.49–€23.82 excl. taxPreliminary estimate for one variant
Personaje inspirado en los Na'vi de Avatar de James Cameron, este personaje lo imaginé como un humano (por eso los 5 dedos) que utiliza un avatar para poder habitar en Pandora. Espero que les guste el modelo y comenten cuando lo impriman,…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
Hello World! In here you will find: What you'll need How to assemble the parts Wiring instructions Code for Arduino + instructions Let's go.. What you need: Arduino nano or clone (amazon - https://shorturl.at/egjK9 ) OLED display 128x32…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
This is a printable party hat that you gussy up by inserting left over filament. It also includes a matching place marker. It can be printed with no supports and the place marker has a hollow base if you want to fill it with sand for some…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Fun dangling explosive earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
With the two provided models, you can print a shell of a cube (60mm)³ and at least three congruent pyramids. For understanding purposes, it is suitable to print the shell with a clear filament. The pyramids are best printed in a different…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Beer tray
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Description in pdf attachment. Team Hammerhead - SPŠ
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a quick seedling plellet planter designed in an afternoon for compact placement in a tray. It has standoffs for drainage on the bottom through which roots can also grow through to e.g. a hydroponics setup.
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Digital Temperature and Humidity Sensor Mount My Enclosure is a completely sealed unit. This causes some issues with temperature regulation and humidity. This sensor I bought off Amazon and I decided to mount it to my enclosure so I can…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
This Garmin Explore 2 navigation holder can be put on top of a Cycle2 Charge unit. It gives not only your bike a clean look but also protect the charger from water intrusion while charging your device. The navigation device is attached…
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for one variant
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
Print with PLA, Spring with PETG, all without support, different colors. Use 2cm filament and fix it in the Bow, curve it to be parallel and use it as a pin to hold the cover on the surprise box (Suggest to oil part of the filament on the…
3D Printed race track RC car 1/10 scale 3D printed body available HERE Step files of all the 3d printed parts are now available Stay tuned for exciting new projects on our Facebook group The 3 main guide listed above contain all the…
Mat Extension for the Cricut Explore Air 2 which can be disassembled and stashed in the right hand drawer. The handle itself should be rotated by 90° up when inserting it into the door recess and then by 90° down again so that it sticks…
Spoiler: I have not created 507 models; the name refers to the book “507 Mechanical Movements” by Henry T. Brown from 1868. The book is also available as an online version with animations. You should definitely take a look at it. Such…
The MZ4250 Astral Exploration Ship is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC. Want…
I did not print it yet. This is a file format conversion (f3d, stl) of "Visible Interactive Human - Exploding skull" published by WitmerLab at Ohio University on Sketchfab. Since this is merely a format change I did not (to the best of my…
I needed a set of legs to raise my Cricut Explore Air 2 high enough to allow my cricut joy to fit underneath so i designed these. they use the original screws that hold the rubber feet in place. I printed them in PLA with 5 walls and 10%…
Diamondback Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
In memory of my Dad who passed away last Sunday. Category: Sculptures
L’Explorer Y-4 Un drone Futuriste et ultra maniable Filaments utilisés : Filament NANOVIA TPU70D Black et Gris lien : Imprimante3dfrance - Imprimante 3D France - Filament et fil plastique 3D - PLA, ABS, HIPS, PVA... TPU 95A ou 98A Pour le…
Minimal supports, maximum cuteness. ✔ Prints in just 20 minutes (mono-color version) ✔ Ideal for keychains, gifts, or your mini space display ✔ A loyal crew member to any FDM fleet00
Dieter was an engineer in the Imperial army who, when off-duty, liked to explore the uncharted valleys of the Grey Mountains. He could also be a town cryer or a poet - you get to choose. Suitable for 28mm tabletop games. Created so that…
My girlfriend ask me for an incense holder one day and I decided to surprise her and made this simple, practical and funny design. I've divided the object to make it easier to clean the ashes. I've made 2 versions of the tray for each…
ASP Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
Meet the cheerful young female gnome explorer , full of curiosity and charm. Designed in a minimalist, handcrafted style , she wears a tall, bent-pointed hat that hides her eyes completely—only a round nose peeks out. She has no beard ,…
This is my version of the Grav Charges used by the Mandalorian in the TV series The Mandalorian. Here's my printing and painting video for this, https://youtu.be/88RAbjf0Fa8 . You may need to fill the dome with some bondo or spackle if…
Update 05/07/2024: See https://www.printables.com/model/865450-blank-hitch-cover-with-compliant-spring-lock-mecha for improved customizable blank design… See https://www.printables.com/model/871479-st-logo-hitch-cover-with-spring-latch…
A mighty owl-man adventurer with natural stealth and night-vision plus a cool walking stick. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree…
Found this awesome model at the 3DWarehouse in the Star Wars section. Stripped it back to its original parts. Handy for those moments when you missing a particular piece you can replicate it here ; ) Print instructions Category: 3D Printing
Universal pen holder for Cricut Explore Air 2. The model has space for an M4 screw-nut. Make sure adding a stop at the right layer height to your gcode to put the nut into the space before the layer is closed . I have used an 16mm screw.…
Parental Advisory Explicit Content logo in 3D. 5mm high.
This is an adapter for a normal Sharpie (Fine Point). This will work in a Cricut Explore 3 ( or probably any Cricut Explore version ). Print takes about 10 minutes and doesn't require supports. I printed mine in Hatchbox Black PLA.
A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print instructions Category: Hobby Summary A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print…
On my Cricut Explorer Air my 12x12 mat was always flopping down while it was going back and forth while cutting. I designed this to help keep it stay in a straight plane while printing etc. Hopefully when i have some more time on my hands…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
James Hetfield signature model of the model Explorer
designed an adapter to use the cricut joy infusible ink pens, i bought by mistake, in my cricut explore air2. Print instructions print it without supports
A quick remix of Potion explosion tray by Travitz to fit my MK3S bed. https://www.thingiverse.com/thing:4752668 Glue with two pins to help you align the two parts
A model of the U.S. Navy Explosive Ordnance Disposal (EOD) insignia. A simplified version with reduced detail is included and recommended if scaling the model down to print. Photograph printed in Overture Silk PLA.
This keeps the original spirit of the dispenser but improves the bad parts. Prints in 2 pieces for smaller format printers. See photos for print orientation
This 3D printable model features a crouching astronaut in a fully detailed spacesuit, gently interacting with alien flora. The base includes textured terrain, scattered rocks, and stylized plants with dotted leaves and closed buds. The…
All in one solution for nozzle brush, flex plate stop/alignment and poop bucket. I designed it primarily for use with TAP where the nozzle is barely able to reach brushes since TAP pushes the nozzle forward. So i positioned the brush…
Designed to use M2 screws to attach to the frame. To attach to the O3 Air Unit, I used the cross-head screws that come installed in the Air Unit. I used 95A SainSmart TPU, 100% infill, supports enabled for the O3 Mount but not the Antenna…
I designed an insert for all the current expansions, up to Good vs. Evil, that fits into the Recipes for Disaster box with no lid lift. Print 1 of each insert and sort using the pictures I've uploaded and the breakdown below. Sort the…
Celebrate the Mars Exploration Rovers, Spirit and Opportunity with this 3D printed model. The rover feature rolling wheels. pivoting suspension, and artiuclated mast cameras and antennas. The rover is also able to fold into its landing…
Thank Flywoo for the Arm protector model - you can download that for free from their website. Without these Skidpads / motor protectors / Standoffs (whatever we call them), the Explorer LR4 wobbles and lands on its Beeper. These make sure…
It's pretty much a Skystars clone of the original LR4 but with folding arms. Throw on some floppy props and have people guessing whether or not you have a long range 4" FPV drone in your pocket, or if you're just happy to see them!
Insert for Explorers of Navoria + Forgotten Lands Expansion + Deluxe Components + Card Trays! Card trays fit sleeved cards! The box currently closes almost flush, which is barely noticeable. Should be good for vertical storage. I use the…
This is an extracted model model of the Zorgon Peterson Caspian Explorer from Elite Dangerous The model will needs some fixes in your favorite 3D tool Scale 1:1000
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
An exploded view of the Lego Saturn V (21309). Screw holes for mounting are 4.3mm in diameter. Print 2 of the smaller diameter brackets, and 4 of the larger diameter ones. You only need the solid bracket if you plan on adding lights to…
A remix of Kijai's lighthouse on a rock, exploded into separate pieces so that it can be printed in multiple colors. Tolerances and alignment pins are designed around resizing the parts by 225%. Color changes are intended for the railing…
This was printed on a Bambu X1C with PLA. No supports needed. Print with the Switch adapter side down. I did adjust the size of the bridge flow to make the bridging more aesthetic, but that shouldn't affect any functionality.
It always bothered me that you can't align the magnetic print sheet on the magnet very well on the V-core 3. With those small prints you can now. They are simlpy slid on the back edges of the Bed plate and clamp themselves into the unused…
Printed in Jayo Grey PLA in a .15mm layer height on a Voron Trident. Make sure you enable supports and they don't generate in the tubes.
Original design from DrMEYL, changed the hole size to hold nozzles a bit tighter for wall mounting. Personally, I'd print it on its back with supports. Or print without hex plug version and glue hex on the back side.
The explosive potato from Plants vs Zombies, I made it with Blender3D, enjoy!
O4 camera and M100 GPS holder works with flywoo ND filters
Fun inside and outside the water! These bottles have openings big enough not to trap any fingers. The different shapes and sizes along with identical spouts make them fun to stack in different orientations and see what will balance. Each…
This case holds a Flywoo Explorer LR4 O4 and O4 Pro. Picture example is PLA+ 4% infill, 2 walls, 2 top and bottom layers. Supports required for the lid retention rails - Grid 0.21 top and bottom distance. I added modifiers so the case is…
print PETG 2per 20%
Printed in PLA with .15 layer height and .4mm mozzle on a Voron Trident 350mm. Filament used is iiidmax Fluorescent Green PLA+. This adds a little bit of marble mixing when adding marbles back into the hopper. For a future design update I…
It's a nerf gun dart tip that explodes! Just insert one of those little fire cracker things kids throw on the ground (the ones you see in the picture), and it will go BANG on impact! I made vent holes at the back so that you can actually…
A few years back I purchased one of David Windestål's newly released Bicopters from RCExplorer (https://rcexplorer.se/). This was a very interesting RC build and a challenge to fly. However the carbon-fiber canopy made it very difficult…
DJI O4 air unit pro antennas holder for Flywoo Explorer LR4 drone
MEGUMIN - KONOSUBA EXPLOSION - .CUTE - WALL ART
There are a few mounts around to get the M100 onto the Flywoo Explorer LR, but a lot of them have large covered portions that make me think that heat dissipation wasn't a factor in the designs. With this mount I left both the top and…
Once assembled, the Pumpkin is locked and can only be disassembled with a trick: Spin it really fast! Size: 50mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: Tree Supports Support Object First Layer…
EXPLODING KITTENS BOX: Box to hold the Exploding Kittens game cards for ergonomic transport. The tolerance between the lid and the container is 0.2mm, it is recommended to use a hole compensation of -0.1mm to avoid accidental opening. The…
Original Upload by https://www.thingiverse.com/_iw0gz_ A project of the Proteo Explorer Team https://www.facebook.com/proteoteam/ Printer brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 50 Filament…
This storage box has plenty of space for all your Exploding Kittens cards. It fits the party version, ordinary version, NSFW, and all expansions so far. There is room for more expansions. Works with sleeved and unsleeved cards. Other…
Electric Guitar model based on ESP explorer. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok. Neck is divided in 2 pieces for easier…
It is a didactic model designed to better understand the operation of bevel gears to study their forces, it has rotation functionality and magnets to hold the axes and thus study the behavior of both gears. materials: It is important to…
I designed a cam mount for the upgrade from the caddx nebula pro to the O3 air unit for the Flywoo Explorer Micro LR drone. Adjustable cam angle from 0 - 35° also added a reference indicator for a 25° cam angle. Print Settings: - Intented…
The goal is to use a perfect dispenser and print it without the need for supports.
