Counting matching models…
Insert for Exploding Kittens ( https://explodingkittens.com/ ) card game. It may be used as draw / discard pile tray while playing the game.
Print approx. €5.42–€6.62 excl. taxPreliminary estimate for one variant
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
Print with PLA, Spring with PETG, all without support, different colors. Use 2cm filament and fix it in the Bow, curve it to be parallel and use it as a pin to hold the cover on the surprise box (Suggest to oil part of the filament on the…
I designed an insert for all the current expansions, up to Good vs. Evil, that fits into the Recipes for Disaster box with no lid lift. Print 1 of each insert and sort using the pictures I've uploaded and the breakdown below. Sort the…
EXPLODING KITTENS BOX: Box to hold the Exploding Kittens game cards for ergonomic transport. The tolerance between the lid and the container is 0.2mm, it is recommended to use a hole compensation of -0.1mm to avoid accidental opening. The…
This storage box has plenty of space for all your Exploding Kittens cards. It fits the party version, ordinary version, NSFW, and all expansions so far. There is room for more expansions. Works with sleeved and unsleeved cards. Other…
This is a print-in-place insert for the game Exploding Kittens. It will organize all cards into the Barking Kittens box. (Barking Kittens is a required expansion currently as this insert fits into the box the expansion pack comes with.)…
Source: https://www.models-resource.com/mobile/dragonballlegends/model/65567/
An over the top storage box for Exploding Kittens game. To save material I would block supports above 45mm. Most printers should be able to bridge that gap no problem and the Cat has some overhand I didn't spend time figuring out so let…
Works very well, you can clearly see the puff of dust at 15 yards, and target stays intact after many shots from .22 pellet gun. I printed in PLA which seems to work perfect for this application. You can hang it or tape it to a target.…
This is a smaller version of my storage box for Exploding Kittens . It fits the party version, ordinary version, and all expansions so far. There is room for more expansions. Works with sleeved and unsleeved cards. Other Versions There is…
It's a tray for Exploding Kittens that fits perfectly into the original box and can accept all the cards from the 3 expansions, even with only two players. Its shape allows for easy retrieval of cards even when there are not many left,…
I didn't like any of the inserts/card trays for Exploding Kittens, with the exception of https://www.thingiverse.com/thing:1957634 , which itself is a remix of https://www.thingiverse.com/thing:854289 . But it's too small, and the tray…
A storage box for Exploding kittens. The box is unnecessarily high for the standard game but it is the limit of what the parametrization allows for currently. Printed with 0.2mm layer height You need 6x M3x30mm
A breakable pumpkin "bomb" that I designed for my drafting course. Uses 40 3mm x 6mmD magnets (found on AmazonUS here ), and a standard battery powered tea candle.
Compact 3D Printed Box for Exploding Kittens Upgrade your Exploding Kittens game experience with this custom-designed, compact 3D printed box! This sleek storage solution is much smaller than the original packaging, making it perfect for…
A box for card games! The cards are placed in the box, if necessary the protection on top, then the lid is screwed on it, which fixes the whole thing. Here the cards from Exploding Kittens are used (dimensions of a card: approx. 63mm x…
A cute little outhouse bank that'll be sure to surprise whoever donates a coin! This is a real easy print, I played with different colors and stopped layers to change colors for the front door to come out the way it did, experiment time!…
Logo of the popular card game Exploding Kittens. Suitable for sticking onto a simple box of cards - box not included with this model. Logo populární karetní hry Výbušná koťátka (Exploding Kittens). Vhodné k nalepení na jednoduchou…
Insert for base game version of Exploding Kittens ( https://explodingkittens.com/ ), which can also be used as a draw / discard pile tray while playing the game. This remix can fit cards sleeved with “inner sleeves”, which have a 64x89mm…
exploding kittens box for the main game and all extensions.
Add another level of fun to your trigger time. Hitting a pressurized plastic bottle using this cap will result in a 150 decibels sonic boom that can be heard up to 2 kilometers away! Screw this cap design on top of a regular 28mm PET…
Resized and combined for easier printing. I printed the entire bomb with TPU for resilience from both the impact from dropping the model and the firework going off. A 7mm brass tube in the nose cavity will reenforce the cavity and provide…
EXPLODING BENCHY BOAT IF YOU MAKE CENTER TRANSPARENT YOU CAN SHINE A LIGHT THROUGH THE BOTTOM TO MAKE IT LOOK LIKE FIRE. ASSEMBLY - ASSEMBLY 2X WATER PARTS AND EXPLOSION CENTER FIRST. GLUE IF NEEDED - ASSEMBLE POLES TO PARTS - ASSEMBLY…
Fast printing case for Exploding kittens. Fits the base game and all expansions. Entire case takes under 3h to print. Print with PLA in Vase/spiral mode with wall thickness of 0.6-0.8mm. Fits: Base game Imploding kittens Barking kittens…
Box for exploding kittens 2 player version, paying respect to the smaller card number. Print at 102% if you want to include the manual.
Card holder for the partygame Exploding Minions
Box insert for Exploding Kittens designed to be compatible with sleeved cards and short enough that the lid goes all the way down. I tried another insert someone made, but it was a few mm too tall for the lid to fit properly, even without…
How to use. Only ever USE THE BULLET NOT THE SHELL. The shell is for desplayment only. How to load: PUT THE BULLET IN HERE. IF YOUR BULLET DOSENT FIT IN THE CHAMBER, PUT IT IN THE FRONT BY INSERTING IT HERE:
For info on the print settings I used and a list of other game organizers I've made, check out this model !
Print the stick on its side and the head upright. You may need to drill out the hole a little bit more to get it to fit. You may also have to glue it in place. thunderstick head v2.stl fits the shaft more easily, but I left the original…
Customized version of http://www.thingiverse.com/thing:2120898 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2120898 Instructions Using the following options: lip_thickness = 2 compartment_height = 67…
This is a replacement lid for the game Exploding Kittens because my dog ate the original box. I used this insert to hold the cards and designed this lid for the box. The OpenSCAD file is attached if you want to make modifications or use…
I designed this box so I could print the lid using my MMU2S. I modelled it to exactly what I needed.
you only have to print the base once but the target explodes when shot. This was made for airsoft but works with others.
A box for storing your Exploding Kittens game. The box is for sleeved cards with a sleeve dimension of 58mm x 88mm. Please check your cards with sleeves before printing and scale the print accordingly. The box is work in progress (WIP).…
A box to store your exploding kittens cards + manual in. The box holds about 32 - 50 cards, (enough for the 2-player version), and has a closing system designed to look like a ‘nope card’. Printed on a Neptune 4 Pro, with Elegoo red +…
I really liked the exploding outhouse design, but my wife decided it needed to have a shingled roof instead of wood grain. Print standing up (should be how it's already oriented). Best to use a brim so it doesn't tip over. Supports not…
Box for a single deck (56 cards) of exploding kittens card game. Print Settings Printer: Tevo Tarantula Rafts: No Supports: No Resolution: 200 Infill: 20% Category: Toy & Game Accessories
Ideal for playing exploding kittens while traveling
A fun model to show centripetal loads in action. As the model spins, the arms inside shoot outwards. The model is print-in-place and requires no assembly after printing. However, for a nice and smooth print please follow the following…
Customized version of http://www.thingiverse.com/thing:2120898 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2120898 Instructions Using the following options: minimum_box_length = 0 compartment_width =…
This insert increases your original box capacity to ~150 cards, which equals two full sets of cards, plus two expansions (including manuals). Source files are given as .stp and .3dm (Rhino V6). Please post your remix and prints!
A custom card tray to fit the famous card game Exploding Kitten (Party pack) Helps organise and keep the cards in place during storage Printed this with PLA 0.2mm layer, 2 walls, 15% infill Print weight is 32.59g
An unravelling undead creature made of viscous, chaotic worm-beasts. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my 3D printable releases…
🌟 Ultimate Exploding Kittens Organizer 🌟 Organize your Exploding Kittens and other card games like never before! 🐾 This thoughtfully designed organizer is perfect for storing your favorite card games, including Exploding Kittens , Uno ,…
Just a few tiny improvements to an already esxcellent model
This organizer features dedicated compartments for the main deck, all rulebooks, and a separate section for the Exploding Kittens/Defuse cards. It’s designed to work best if you own one copy of the base game and each of the following…
Some original parts of the exploding lamp by DJ_Konsult are a little bit sensitive. So I redesigned them to be able to make the lamp from ABS without damaging the parts on assembly. These parts also should be used with PLA to prevent…
I needed to fit the sleeved cards into the box. So I designed this insert that fits in the middle of the original cardboard insert and houses the sleeved deck. Fits cards with 66x91mm sleeves, like the Gamegenic grays I used for my cards.
I remixed a model by @Austin_1218273 to accommodate sleeved cards for Exploding Kittens: Party Pack and Expansions 1-4 (Imploding Kittens, Streaking Kittens, Barking Kittens, Zombie Kittens). I divided the cards into each well as follows:…
a pin for those who don't like the tower of power from exploding kittens
Exploding Kittens Party Pack insert for sleeved cards. Works with the Polish edition, not sure if it fits others. Designed to print without supports on Bambu Lab X1C, though might be a bit of a stress test for your printer if cooling is…
This model can be printed with NO supports by enabling “make overhangs printable” in your slicer. If “make overhangs printable” is used the bottom of the liquid part will look slightly different than the original model but hardly…
Keep your Exploding Kittens Grab and Game cards neat and ready to play with this custom-designed insert. It holds all the game’s cards securely in place. The design ensures easy removal of the cards, as well as space for the game…
I modified the OpenScad code for the customizable card game box in order to have the cap and box line up flat. Printed this front plate i created in HueForge . I used prusaslicer to cut the plate where the cap and box meet. You might also…
better, but takes longer to print and only works with airsoft guns.
Insert for base game + Zombie kittens + Imploding kittens + Streaking kittens + Barking kittens.
Replacement torpedo for a long-discontinued wooden battleship model. See images.
also if anybody don't want to or dont know how to i can put text or anything on it i will try to make it happen just comment what and ware
Behold mortals! Air Tag holders fashioned after the creators of Florida and Open Mic nights. Regardless which side of the God Games arena you sit on during the merger, one or both of these air tag holders should be all the ass can of…
I made a remix of the SnapLock Box V3 to feet the play Game Card Rat a tat CAT & Exploding Kittens together with their instructions Looks Fabulous 4 colors print sliced with prusa slicer and made with Vorn 2.4 350mm with a tradrack
Compact 3D Printed Box for Exploding Kittens Upgrade your Exploding Kittens game experience with this custom-designed, compact 3D printed box! This sleek storage solution is much smaller than the original packaging, making it perfect for…
