Search results: f405

Counting matching models…

SpeedyBee F405 Wing MINI Mounting Case

Mounting Plate for the SpeedyBee F405 Wing MINI. Makes It Easier to remove FC by only gluing down Base Plate to Aircraft

Downloads: 737
Likes: 31
Rating: 5

Order a print of this model

PrintablesAnthonyH

Speedybee F405 Wing Mini Mount

I wanted a light and compact way to mount the SpeedyBee F405 Wing Mini flight controller on my arrow shaft Slowstick bi-plane. There are two different orientations you can assemble the flight controller, standard and custom. Depending on…

Downloads: 475
Likes: 21
Rating: 0

Order a print of this model

PrintablesMatej

SpeedyBee F405 Wing mount All In One

I was looking for a mount for the SpeedyBee Wing, but I couldn't find one that integrated the GPS antenna and the RC receiver. So I drew my own.

Downloads: 441
Likes: 37
Rating: 4.5

Order a print of this model

PrintablesBeetlebeetle

SpeedyBee F405 Wing mount

This is a mount which offers a couple of ways of securely holding the SBF405 Wing. I don't like attaching flight controllers to airplanes with just velcro/hook and loop because they are never securely held in place and the FC can sense…

Downloads: 369
Likes: 17
Rating: 5

Order a print of this model

PrintablesP.I.Engineer

heewing t1 ranger speedybee f405 wing mount

plate with holes for mounting fc in airplace

Downloads: 367
Likes: 18
Rating: 5

Order a print of this model

PrintablesDaniel

F405 wing support+gps Speedybee

I used PETG, 15 % infill, 0.2 Quality Standard. M3 + nuts. Print with support. F405 and GPS were getting hot, so I left holes and space for air to flow. 4 x M3x8 + nuts 2 x M3x8 + nuts

Downloads: 281
Likes: 18
Rating: 0

Order a print of this model

PrintablesJonas

MATEK F405 Wing v2 bracket

Since I did not find a suitable bracket which was sturdy enough and did not interfere with the wiring, i designed my own. It can be printed without supports. The top plate has an opening for the build-in LED light and a few cutouts in the…

Downloads: 272
Likes: 8
Rating: 0

Order a print of this model

PrintablesP.I.Engineer

speedybee f405 wing fc mount

simple mount for screwing down a wing fc

Downloads: 243
Likes: 12
Rating: 0

Order a print of this model

PrintablesAlfred

Matek F405-Wing mount

Simple mount for the F405-Wing Flight Controller. I found several designs, but in my opinion they were all to clumsy and big. This one is tiny and the FC removes towards the top, so also useful in tiny flying wings. I created 2 versions,…

Downloads: 160
Likes: 9
Rating: 5

Order a print of this model

Printablesdg fpv

atomrc dolphin - speedybee f405 wing + walksnail gps mount

bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed

Downloads: 154
Likes: 15
Rating: 0

Order a print of this model

PrintablesSendero

F405 Wing + GPS Tray For Flightory Stingray

Remixed this excellent F405 Wing mounting for use in my Flightory Stallion build.

Downloads: 144
Likes: 9
Rating: 0

Order a print of this model

Printablesronoth

SpeedyBee F405 Wing Mount

3D printable mount for a SpeedyBee F405 Wing Mount. Also includes optional top mount for M100 GPS module. Required: M3 Inserts 5mm diameter M3 Screws. ~5mm without GPS and ~10mm with GPS mount.

Downloads: 120
Likes: 13
Rating: 4.5

Order a print of this model

PrintablesBunk

Matek F405 WMN Mount

Designed two versions: Called The Easiest- just attach fc to the mount with m2 screws, and glue in the mount to the wing or screw it with m3 screws (30x30mm) Called Slide In- slide fc in the mount, than screw it up with m2 screws. You can…

Downloads: 120
Likes: 7
Rating: 0

Order a print of this model

PrintablesANDREAS NIKOLOPOULOS

SPEEDYBEE F405 WING mount with GPS

Print with 3 walls and 2 top/bottom layers. Supports shouldn't be necessary. I printed the "SPEEDYBEE F405 MOUNT" in PETG but PLA should also work fine. The "GPS_MOUNT" should be printed in TPU but i haven't tried any other material. If…

Downloads: 116
Likes: 9
Rating: 5

Order a print of this model

PrintablesPop Gheorghe

T1 Ranger F405 WMN mount

The model is remixed from other models with some improvements from my side. I used M2x5mm to fix the FC to the support. It should work with matek F411 as well.

Downloads: 93
Likes: 1
Rating: 0

Order a print of this model

PrintablesKarelVáňa

Mounting bracket for FC Matek F405-Wing V2

Simple FC mount with a locking tab. The holes for scrwe are 3mm

Downloads: 83
Likes: 9
Rating: 5

Order a print of this model

PrintablesMorf_Son_of_Wogh

Speedybee F405 V3 Protector

Print in TPU.

Downloads: 82
Likes: 3
Rating: 0

Order a print of this model

Printableslindahl85

Speedybee Master 5 V2 Side plate for F405 V4 with USB-recess

Just mirror the construction if you have the usb placed on the right side instead of left side. I print mine in yellow PETG.

Downloads: 75
Likes: 3
Rating: 0

Order a print of this model

PrintablesJadozub

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…

Downloads: 73
Likes: 6
Rating: 0

Order a print of this model

PrintablesCryptoGuide

Case for Trezor DIY (0.96' Display + WeAct Studio STM32 Core STM32F405RGT6)

Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…

Downloads: 73
Likes: 5
Rating: 0

Order a print of this model

PrintablesMRSalguod

SpeedyBee F405WingApp Case

Speedy Bee F405WingApp Case with built in BZ-251 gps module holder. Print the gps holder out of tpu. The rest can be out of whatever you like. You will need 8 m3x4 and 4 m3x6. It requires to xt60 connectors with the grey wire covers on…

Downloads: 65
Likes: 8
Rating: 0

Order a print of this model

PrintablesSilentCamille

SpeedyBee f405 Wing 30x30 Mounting Adapter

2 Parts Mounting Adpater for F405Wing Print in PLA - PETG Quick to print - I used 25% Infill Hardware Needed 2 M3 <20mm Screws 4 M3 Nuts 4 M2 ~4/6mm Screws ~ 10g of PLA

Downloads: 58
Likes: 7
Rating: 0

Order a print of this model

PrintablesBoopidoo

SpeedyBee F405 Wing Mini Mount 20x20

This is a secure mount for the SpeedyBee F405 Wing Mini FC. It locks it in place in all directions without gaps. Use an M3 tap to make threads. The Upper part can be split into parts and printed in different colors with an arrow symbol.…

Downloads: 48
Likes: 2
Rating: 0

Order a print of this model

Printablesbfortifed

Adafruit STM32F405 Feather Case

Small case designed with the STM32F405 feather board in mind. It has a button for the reset switch and a slot in the rear for memory card access. No provision for LiPo battery connector or I2C (yet). Also tested and working with Bluefruit…

Downloads: 44
Likes: 2
Rating: 0

Order a print of this model

Printables3DiXY

SpeedyBee F405 Wing mount - Remix for Reptile Dragon II

Original design by Daniel: https://www.printables.com/model/1000753-f405-wing-supportgps-speedybee I modified this great design because I had some personal desires, so a big thanks to Daniel for sharing the original cad/step files (every…

Downloads: 41
Likes: 4
Rating: 0

Order a print of this model

PrintablesLee Hoyoung

SpeedyBee F405 wing FC Case

This is a box-shaped case for using the speedybee f405wing FC on a fixed wing.

Downloads: 36
Likes: 2
Rating: 0

Order a print of this model

Printablesjostak

Longer SpeedyBee F405 Wing Mini Bottom Plate

Just longer version of the oryginal allowing to be unscrewed while the servo connectors are horizontally mounted. All credits go to https://www.printables.com/model/1094850-speedybee-f405-wing-mini-bottom-plate. Works great and simply…

Downloads: 30
Likes: 2
Rating: 0

Order a print of this model

PrintablesComster

SpeedyBee F405 Wing Mini Bottom Plate

This model is a flat plate with holes and cutouts so that it can replace the bottom PCB board of the SpeedyBee F405 Wing Mini flight controller. It has larger holes away from the footprint of the FC that enable the assembly to be screwed…

Downloads: 28
Likes: 0
Rating: 0

Order a print of this model

PrintablesBooomit

SpeedyBee F405 Wing mount (slim remix)

SpeedyBee F405 Wing mount with reduced base size to fit smaller models.

Downloads: 18
Likes: 0
Rating: 0

Order a print of this model

PrintablesManbehindthemadness

JHEMCU GSf405a

This is a sizing blank. Note: I don't have this board on hand, so the size is based purely from the documentation.

Downloads: 18
Likes: 1
Rating: 0

Order a print of this model

PrintablesJeroen_dereus

Matek f405 WMO Mount

Matek f405 WMO Mount use some hot glue to fully lock in the fc

Downloads: 16
Likes: 0
Rating: 0

Order a print of this model

PrintablesWilliamWill3D

SpeedyBee F405 Wing MINI Mount for Heewing F01 Ripper 690

Hi, As the title says: This is a Mount for the Speedybee F405 on the Heewing F01. You can use the original screws from Heewing, but will have to use longer M2 screws for the standoffs. M2x8 should be fine. Have a nice one.

Downloads: 15
Likes: 1
Rating: 0

Order a print of this model

PrintablesUenbzsto

Bulkhead Mounting Bracket for Speedybee F405 Wing Mini USB Extender

"USB Mount Screws" has the mounting holes sized for the 3 mm mounting screws without inserts "USB Mount" uses heat set inserts for the 3 mm mounting screws

Downloads: 12
Likes: 0
Rating: 0

Order a print of this model

PrintablesDrawingup

Walksnail Speedybee F405 Drone capacitor mount

Capacitor mount for Walksnail Avatar HD Mini VTX V3. This is designed for the Speedybee F405 capacitor, but can be used with other similar sized caps. Printed with TPU, I have not had the VTX get hot enough to melt the TPU yet. To mount,…

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

PrintablesVolodymyr Boryslavskyi

Flightory - Super Stingray VTOL - FC Mateksys F405 and ESC 4in1 mount board

Mount board for Mateksys F405 Wing V2 and ESC 4in1 including GPS, elrs and antenna mounts.

Downloads: 5
Likes: 0
Rating: 0

Order a print of this model

Printables

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

Order a print of this model

Printables

AtomRC Beluga - AtomRC F405 Navi Mini FC Tray Mount

I'm not fond of using only double sided tape to mount flight controllers to airplanes fuselages, so this FC tray mount for the AtomRC Beluga addresses this problem. The mount is designed only for the AtomRC F405 Wing Mini and its mounting…

Order a print of this model

Printables

f405-wte fc for zmr250 mount for spacer centre mount

use this model appropriately and ill surely upload more itterations as i go along

Order a print of this model

Printables

SpeedyBee F405 wing FC Case

This is a box-shaped case for using the speedybee f405wing FC on a fixed wing.

Order a print of this model

Printables

MATEK F405 Wing v2 bracket

Order a print of this model

Printables

Speedybee F405 Wing Mini Mount

Order a print of this model

Printables

Canon XF405 Camera Monitor Shroud / Cover / Shade

This is a shroud that slides over the flip-out monitor on a Canon XF405 video camera to make using it outside easier. Attach some Velcro (fuzzy side) to the inside of the shroud on the side that the back of the monitor touches for a more…

Order a print of this model

Printables

AtomRC Beluga - AtomRC F405 Navi Mini FC Tray Mount

Order a print of this model

Printables

f405-wte fc for zmr250 mount for spacer centre mount

use this model appropriately and ill surely upload more itterations as i go along

Order a print of this model

Printables

AR Wing Pro F405 Wing and Esc mount

Print without any support in temperature resistant material i.e. PET-G or ASA. After print redrill holes. Small handles are for cable management.

Order a print of this model

Printables

Speedy Bee F405 Wing Mounting Case

Mounting Plate for the Speedy Bee F405 Wing Makes It Easier to remove FC by only gluing down Base Plate to Aircraft Category: 3D Printing

Order a print of this model

Printables

F405 WMN holder

A simple plate to mount the F405 WMN FC. Basically glue the plate where needed and use some M3 screws to tighten the edges of the FC to the base. Might need screws with a little bit wider heads. Also the cutout for the FC is a tight fit,…

Order a print of this model

Printables

Case for Trezor DIY (2.42 Display + ESP32_Mini V31 STM32F405RGT6)

Software and assembly video here: There are two sets of parts for the top+bottom+buttons depending on the screen size you want. Case is ideally held together with 12mm M3 self tapping screws. Electronics Used (Including Purchase Links)…

Order a print of this model

Printables

Canon XF405 Camera Monitor Shroud / Cover / Shade

Order a print of this model