28 models
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
A flush, no-snag plug for the hole in an InLine Fabrication Flush Mount Quick Change Base Plate for when there's no quick change plate attached. Prevents small objects and debris from falling into the hole in the base plate when there's…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…
This is a large speed test so that the printer can get up to speed for direction changes. Other tests I found on Thingiverse were too small to really test full-speed printing. Included in this test are: Straightaways Curves Overhangs…
I designed this tool, to assist in fabricating ethernet cables. It maintains wire formation, in preparation for insertion into the RJ45 Jack. It also assists in precisely cutting wires to (13mm) the correct length.. Strip off about an…
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
Mount for Ruida 6445 controller angled mount for Y1200 Laser cutter/engraver
the pcbs must have a little bit more clearence than pro ones, i use 24 mil For this you need a virgin pcb,Ferric chloride ore some other etching solution, some tape (blue painters tape leaves no residue) to attach the pcb to the bed, a…
A simple block to fill in the hole for the Inline Fabrication Flush Mount . Easy to remove and sits flush.
Designed to allow you to mount common light-duty accessories on your Inline Fab. quick change bench setups. As of now this is just uploaded as a STEP file, so it can be brought into any mainline 3D editing software for installation of…
I love my Inline Fabrication ultra base and it's quick change plate system, but I needed a way to store the equipment that is mounted on the quick change plate when they are not in use in the ultra mount. Inline Fabrication have their own…
UPDATE (04/16/2020): I revised the files and removed the lettering, they were not printing right with the 10 wall settings. USE the yaxisside1v3.stl and yaxisside2v3.stl Hey guys, my name is Caleb and I'm building a further fabrication…
A small tray for storing the thumbscrews used to secure an Inline Fabrication Quick Change Plate to a Quick Change Base when they're not in use. The tray is designed to be mounted to an Inline Fabrication Rail wall-mounted organizer,…
Storage dock for inline fabrication quick change plates. Probably won't hold a real one. I use it with a printed quick change plate. https://www.thingiverse.com/thing:5232395
This primer tube and extra parts storage block fits on the Inline Fabrication Hornady powder dropper dock storage and is secured by the included printed plastic bolt. There's plenty of tube and follower storage in case you've collected a…
I-spec lever mount, Brakes for 28h stroller hubs, spacers for Shimano freewheels,
The build guide uses a standard 2nd mirror on a custom bracket he made that takes the place of a 1st mirror. I wanted to use a beam combiner instead of one of those cheap laser pointer guides that hangs of the side of the laser cutting…
As part of DREADNOUGHT&CROW 's Two Inch Amulet Fabrication & Decoration System Mark I , these will mark two inch discs into 5, 7, 8, 9, & 12 part segments, using a .5mm mechanical pencil or a similarly-sized scribe of your choosing. We…
What it is A modular matrix of 16×16 ratchet cells that can be digitally configured to cast an almost unlimited number of unique tile geometries, all with a single reusable infrastructure. Instead of making a new mold for every shape, you…
3d-design is customizable, written in OpenSCAD and BOSL2. Measure your container and make the parts that fit ideally. Designed to work with cheap MG90s servos. PCB for driving this servo and more detailed instructions are in the git repo:…
This Welding Pipe Marking Gauge is a simple but very practical tool for anyone working with pipes, tubing, or round stock. It allows you to quickly and accurately mark cutting and fitting angles before welding or fabrication. 🔧 Key…
As part of DREADNOUGHT&CROW 's Two Inch Amulet Fabrication & Decoration System Mark I, this Two-Part Hexagonal Mold (with alignment guides) can be used in tandem with a hydraulic press in order to create discs with hexagon shapes. 100%…
As part of DREADNOUGHT&CROW 's Free & Open Source Hardware Two Inch Amulet Fabrication & Decoration System Mark I , these will mark two inch discs with various centered polygons using a .5mm mechanical pencil or a similarly-sized scribe…
As part of DREADNOUGHT&CROW 's Two Inch Amulet Fabrication & Decoration System Mark I , these facilitate the stamping/punching of designs around the spaced-inset circumferences of a two inch disc. We will be uploading a full assortment of…
Extended Roller Handle for Inline Fabrication ergonomic style roller levers Uses 3/8-16 x 4 Socket Head Cap Screw - Tractor Supply
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
