223 models
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
Fader para potenciometro deslizante Category: Music
Sculpted with Nomad Sculpt for the Hair accessories Competition . This Comb is designed for cutting Hairs rather than combing them. The comb guides a hair clipper from near 0 mm to 9mm. Although the Model is just 8 mm in height to…
This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…
This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…
If clipper is used to cut your hair, this tool can help achieve tapered cut around the edges. PLA should work just fine. This way you can ask anyone to cut your hair, even if they never done it before. added a mirror copy for a…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Merging of Darth low poly head & my design of a sound desk fader. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution: 0.1mm layer height Infill: 20% Filament: Technology Outlet PLA…
I started from the nanokontrol2 fader Cap uploaded by xantharian and I made a couple of simple changes. Be reassured, these fader caps work interchangeably on either version of the korg nanokontrol (1 or 2) Print instructions Category:…
This is a spare fader knob, i designed, based on the Original Part, as i could not find a fader that is similar to the one my friend needed. I Printed it with 0.1 Layer Height to make it as seemless as possible. I would recommend printing…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Fader caps inspired on Pioneer S9 for Vestax, Ecler and Innofader. The vestax model will probably work with mini innofader. The innofader pnp model works with Ecler Nuo 2.0 channel faders too. Print at 0.05 to have smooth finish. Print…
This is a comp which is used to do gradient hair cut, it is similar to some models but is beefier, have some bevel details with more sense, seems easier to grab but also easier to flat print. It has no limiter on the right side which give…
Sewing machine spool and bobbin clip V2 L with thread clip - Nähmaschinenspule und Spulenhalter V2 L mit Fadenhalter
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
Depending on which hand you want to hold the razor in, you may need to mirror it in the slicer.
It took a couple ruined live streams in which i accidentally touched the FTB-Button instead of Auto-Fade. And believe me, the black frame in program out skyrockets your adrenaline instantly... fumbling around to return the image. Since i…
Description : An essential 3D printable tool for home grooming or professional barbering. This "Arc Positioning Comb" is specifically engineered for clipper blending. The curved shape allows for better contact with the scalp, ensuring…
Another Remix of the Darth Fader, This time for Pioneer Dj Mixers May Require Supports for his Chin
This replacement knob is designed for Pioneer DDJ controllers and features the P(rintable)-Lock system for secure attachment. It replaces original parts such as DAC2685, DNK6440, DNK5888 and comes with an integrated mounting plate for…
A piece to gang together two faders on a mixing board. Many boards use 24mm faders, some use 25mm, both versions are included. IF YOU PRINT THIS AND IT WORKS ON YOUR MIXER, PLEASE COMMENT WITH MAKE/MODEL Spacing for Mackie boards is also…
A portable volume mixer that connects over usb-c. I'm using it with deej, but it can be used for any software you want. You'll need: 5 sliding potentiometers ( https://amazon.de/dp/B081JNQ7MM ) 1 Arduino Nano usb-c (or similar) 4 M2…
Neue Halterung, Guide, Führung für den Wool Winder. Der originale war mir zu eckig, windig und ist mir auch abgebrochen. Dieser ist mehr organisch, rund und stabieler. Hier gedruckt auf einem BambuLab X1C mit PLA meta von Sunlu, Layerhöhe…
I know there are some other versions of the infamous Darth Fader out there, but i could not find one that was easy to print, and fit Yamaha Consoles, This one is printable without Supports and will fit LS9 and M7 consoles.
Tone knob (Treble, Bass, Fader) for SAAB 9-3 Generation 2 For me it worked to print it without supports on my modified Ender 3. Print with the hole down. Might need some force to push in place. The car key worked great to push with ;)…
Mit dieser Fadenspulbox kannst du jegliche Art von Fadenspulen für die Nähmaschien aufbewahren. maximale Anzahl Spulen beträgt 42 maximale Höhe der Spulen beträgt 65mm maximaler Durchmesser der Spule beträgt 25mm With this thread spool…
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
A fader bridge for joining 2 neighboring channels for stereo signals, or other grouping applications. Designed for my Allen & Heath mixer, but should work on other brand mixers with 26mm length fader caps. (Mine has 14mm in-between…
Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)
The source marked this model as adult content.
I designed this simple part to help calibrate the cross fader on the DDJ-1000 controller. Using the service guide this will help to put the crossfader into the three positions needed for calibration. You can see the video at
This comb can be used with left or right hand. I've shortened the handles somewhat as well, making them sturdier. This was quickly done in slicer but I found the fix to be very useful, so I thought I'd put it here. Due to reduced handle…
Includes 3x regular faders 2 x tempo faders Custom Fader Kit 5 Pack for Denon DJ PRIME GO - Personalize your controller with custom faders
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
A model of a fader cap for dj mixer potentiometers or similar.
Enclosure for 5 75mm x 9mm faders and an Arduino Pro Micro. Size is about 10x8cm. The bottom is held on with M2 screws. I use it together with the awesome deej software. To keep it from moving around a "sticky gel pad" found on aliexpress…
I actually forgot to take a picture of the finished product, so I will snap a pic and post it next time I'm at the sound board (at church). This model prints multicolored very well, though. Print it upright with supports (as seen in the…
Depending on which hand you want to hold the razor in, you may need to mirror it in the slicer
Its not perfect but it works ;) 8 Slider Version here: https://www.thingiverse.com/thing:4514085 UPDATE: I added Fader Knobs that look better than the stock ones This enclosure holds 5 slide potentiometers and one arduino nano. In my case…
Fader knob replacement for Yamaha TF5 Mixer and many more (Soundcraft, Behringer, Allen & Heat,...)… Fit also fader 1.2 with x4 lenght x5mm height Printed horizontaly give a better finish but supports will be more difficult to remove (or…
This is a 3D model of a custom mix fader cap, designed to be compatible with the Rane One DJ Controller. It is not an official Rane product, nor is it endorsed or affiliated with Rane or any of its partners. The model was created…
This custom fader cap for the KORG NANO KONTROL 1 and 2 is specifically designed for live performances, offering a far more intuitive feel and significantly improved channel control. It provides better grip, smoother handling, and…
print settings: PLA works fine! Happy printing :)!
Ich habe den Adapter für meine Zwecke in PETG mit 100% infill gedruckt um eine hohe Stabilität zu erreichen. Der Durchmesser für den Mähfaden liegt bei 2mm.
Zweiteiliger Druck! Gemacht für verschiedene Fadenspulen Grössen und speziell für BERNINA Nähmaschinenspulen . Die zwei Teile können einfach mit z. B. Sekundenkleber zusammen geklebt werden. Die beiden oberen Teile sind unterschiedlich…
Final Remix of the Darth Fader, This version should fit older desks, Lighting Desks, and Various other devices with smaller posts. Check the requirements, one version requires support, the other doesnt, both fit the same size post
Replacement fader knob for the Yamaha O1V96 digital mixing console
This will fit on a Behringer X32 sound board. No supports needed.
This is a very simple replacement fader cap for most professional audio mixer consoles or (DMX) light consoles. It will fit the standard 2mm × 1.2mm fader levers. In the images above the grey fader caps are original Behringer caps, the…
Pioneer S9 crossfader external fader cap stopper by Flavour G'z Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 100
Why We lost some of the faders to our Soundcraft Series 4 mixing desk, so I removed yet another fader from our desk and modeled this replacement. Features Tested to fit on a Soundcraft Series 4 mixing desk May fit other desks as well…
The knob has a orientation. It has a smaller hill and a bigger one. Orient them as you like, but intendet is, that the bigger one is in the back. Print with 0.12 layerheight or less. But 0.12 provides a nice grip texture on the top surface.
Nach langen Arbeitsstunden kommen die ersten Verschleisserscheinungen zu Tage und was ein Wunder weit und breit keine Ersatzteile. Kein Problem dank 3d Druck. V1 : gedruckt, getestet, funktioniert Drucker: Creality CR10-V2 Filament :…
Hier biete ich meinen Entwurf des Fadenkopfes für den Einhell Akku Rasentimmer GE-CT18Li an. Ich verwende 1,6mm Faden für diesen Mähkopf. Wesentlich haltbarer wie die Messer ist das alle male. Normalerweise gibt es für diesen…
Lock the fader in place if you don't need it, and entirely remove the risk of accidentally causing chaos. Tested on a DJM-S7 only. It should fit other mixers of the DJM range as well. Fader slot width: 55mm Fader knob width: 12mm
Darth Fader for Avolites consoles. I printed at 0.15 with a 0.4 nozzle. I did use organic supports on the bottom of the helmut.
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
This is a very simple part to connect the two main faders of a Behringer Xenyx mixer so it's easier to keep stereo volumes equal. This fits on a 1204USB, so I assume it fits others in this range. Takes only seconds to print. Print…
3D PRINTING SETTINGS Material: PLA Layer Height: .2 mm Infill: 20%
This bobbin box has space for 48 bobbins and is intended to be used as a drawer. You can glue the top to the underside of your desk for easy and quick access to your bobbins. For easy use right out of the printer, I used bigger tolerances…
Just a shorter Version of the Original. Now also fits on smaller thread spools i.e. Gütermann. Works in Pla. Should work in Petg aswell or better. Very good Print For Filament leftovers Pleased rate, Show and Happy Printing!
Ive searched for a Behirnger Wing sparepart fader knob knob. I didnt find one that i could buy in an afordabe price. So i grabbed one ar grabcad and modified it. The main probelm the slot for the fader motor isnt more or less "standard"…
The most faithful reconstruction of an ETC "Small Fader Pot Knob" that I could manage. This fits a wide variety of ETC consoles. They can be purchased from ETC for $1 each, but are only available in black - I like having the ability to…
Spool generator This thread spool generator lets you procedurally shape sewing spools (bobbins). If you want to create your own spool with different measurements, you can find instructions in the Asset Installation section. The adjustable…
I created a replacement for my old omnitronic dual cd-player. Maybe it fits to some mixers too, if not the step-file can help to adjust it.
Vivitar Audio Mixer Fader Control Knob Enhance your audio mixing experience with the Vivitar Audio Mixer Fader Control Knob. Designed for precision and ease of use, this control knob offers smooth and responsive adjustments, allowing you…
I found that printing out the hollowed-out fader knob as was resulted in failed prints, so made the base solid with a hollow inside. Also added a centre line, like the original.
My colleuge wanted a replacment Fader Cap for the 188mm stalk on their Allen & Heath ZED 14 audi mixer. I found a close aproximation on thingivers [https://www.thingiverse.com/thing:4557896] and then used tinkercad to modify the model. we…
Will provide extra security when applying your fader knob reducing unwanted downward force. Printed on three different printers, I would say the tolerances are good for most machines although my A1 Mini is such a good boy I could perhaps…
Depending on the precision of your 3D printer, you may want to select a different version. For me, version 24 was the best fit. Cap1: 8.05 x 2.20 mm Cap2: 8.10 x 2.20 mm Cap3: 8.15 x 2.20 mm Cap4: 8.20 x 2.20 mm Cap5: 8.25 x 2.20 mm Cap6:…
small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
Faded Honeycomb Planter Size : ~ D155x130 Happy printing! Please check also my other designs. If you would like to support new product development or obtain commercial license for my designs, you can do it here:…
Diseño Conceptual El modelo presenta un personaje estilizado, inspirado en videojuegos con un diseño futurista y detalles intrigantes en el traje. Uso Este modelo es ideal para coleccionistas de figuras de videojuegos y decoraciones…
Diese Unterfadenspule ist einfach zu drucken. Sie braucht keine Unterstützung beim drucken. Gedruckt in PLA und Standard-Einstellungen. Schichtdicke 0,2mm Düse 0,4mm Nach dem Druck müssen beide Teile mit etwas Kleber zusammengeklebt werden.
fader knob for BEHRINGER PMP500 powermixer
This is a fader cap for DJ Mixers. It is compatible with most mixers on the market, including Pioneer DJM's. It is also compatible with all Innofaders. Required Materials : 16g of filament STL Notes : Fader Cap - AMS - is for…
Modern radios in the Ford Sierra / Merkur don't need the fader joystick and some want a USB port or blanked off. This replicates the OEM cover 83-BG-13K-732-BA. If you have a right hand drive car, just mirror this model. I have included…
5 Slider Version: https://www.thingiverse.com/thing:4196719 Someone asked me to make one with 8 sliders so here you have it This enclosure holds 8 slide potentiometers and one arduino nano. In my case i use this to controll the volume of…
I made these to have the faders more visually present in the dark. Therefore, I printed the faders with GlowInTheDark PLA Filament. The mounting holes on the bottom side took some experimenting before they exactly fit the Z1 faders. If…
Modular synth module for Eurorack to attenuate/fade the signal. Quite simple to build as it only requires two resistors: one 10kohm slider pot and one 1kohm resistor. More details here: www.codeof.me/modular-attenuator-for-darker-techno/…
https://cad.onshape.com/documents/d371584d7160c723bbf761f6/w/2f5678efad21dca11f6d6ea2/e/23b2ec25e7ee325d5a9e6f6f?renderMode=0&uiState=6613006142973974d60d759e
I wanted a few faders on a small controller, but the available options on the market were way too expensive. So I designed my own. Full build instructions and firmware here: https://github.com/JennToo/MidiSliders
Attention: This design is for non-standard sliding potentiometers. It does not fit normal sliding potentiometers. If you want to use it with normal sliding potentiometers, you need to adapt the design to fit them. This is my deej audio…
Bobbins for sewing machines are far to expensive if you own a 3D-printer and have the opportunity to make them by yourself. And as if the price is not deterrent enough there are countless different models of those bobbins even within one…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Diseño El diseño de este modelo Funko Pop está inspirado en el personaje Fade del juego Valorant. Se ha cuidado cada detalle para representar fielmente las características únicas del personaje, incluyendo su peinado y vestimenta…
Home made USB MIDI controller with a motorized fader. It has only one physical fader, but it simulates 8 (virtual faders) with only one active at a time. Active fader is selected using the red buttons. In addition, there are 8 general…
Just a cap that connect faders. For SQ series.
NEW KNURLED KNOB VERSION (V2) AND FADER CAP ADDED! Custom KORG KAOSS PAD knobs with a clear indicator to visualize the level and a smaller design for safer live handling of the fx depth knob, preventing accidental touches of the input…
Holder for bobbins in compact, stackable design
DIY Controller for any shortcut (MIDI, DMX, Photoshop, Premiere, Keyboard, etc). It's designed to hold an Arduino Pro Micro, one 10k rotary pot and one 10k slider pot. [PT] Controle para qualquer atalho (MIDI, DMX, Photoshop, Premiere,…
Designed specifically for the Jands Vista M1, S1, & S3 but i'm sure it will fit any of their Vista series consoles, prior to the Chroma-Q merger. So not compatible with the newer EX series consoles. Print vertically on end with tree…
To make haircutting a bit easier, I’ve connected the neck template to a fade-out comb. This lets you trim the neckline without creating a harsh edge. It works best with a hair clipper that’s connected to a vacuum, so the hair gets gently…
Pacman version of audio mixing console fader
Sadly, I no longer have access to the board to test the fit--this model may be a bit too big, and require downscaling to fit.
USB MIDI Fader controller A super-simple MIDI controller that lets you control two parameters at the same time. By pressing buttons, you can program up to 4 levels, each allowing for different combinations of the faders. The LEDs help you…
![Sewing machine spool & bobbin clip {Fadenrollen Klipp} [V2] (size:= M; L) // more powerful inner clip effekt](https://media.printables.com/media/prints/900668/images/6887835_da70503f-32a6-473b-9e4c-5a68c096e3aa_526eaf59-464b-4738-b9ee-614b38f723b5/2024-06-02_23h26_07.png)
