FCX18-1/18 Scale RC Toolbox
I made this toolbox specifically to fit the FCX18 FMS LC90 roof rack. Toolbox should be good for all 18 scale RC.
- Downloads
- 446
- Likes
- 71
- Rating
- 5
74 models
I made this toolbox specifically to fit the FCX18 FMS LC90 roof rack. Toolbox should be good for all 18 scale RC.
Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…
FMS FCX24 Power Wagon wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch. [Instructions] Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
Description: I designed these “Flex Blade” arms to get more travel out of the stock suspension when using the stock shocks. I have Treal 4 link arms installed, but it should work the same with the stock links. The mounting for the flex…
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
Normaly the bumper can print with the standard nozzle 0.4. But for good faces , you have to place it on the build plate in a angle from 39.50° . The tube was cutted in two part and print with a 0.2 nozzle. For the frontlight pls print…
The stepfile is only the left side. Just mirror the side for the other. printed without support.
Normaly the bumper can print with the standard nozzle 0.4. Support is recommended.
This is v1 and it is still in work. Frame can be printed with little supports needed. Transmission mount can be printed without supports.
Drew these up myself for ease of printing. STL is left and right. Same file is compatible with front and back. May require 180degree rotation in slicer to make it easier to print. Enjoy.
FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…
Display Stand and Rock Sliders for FMS FCX24 Blazer
Rear Bed and Cargo for FMS FCX24 Power Wagon. Filament: Mount and Bed - PLA, Cargo - Wood filament (I used ColorFabb Woodfill)
This bed is super simple, just meant to be able to hold the battery so you don't have to take the body off all the time. Fits between the wheels, rather than having a wheel well. I mounted mine with long screws into some plastic strips…
So this is my first part for the FCX18 K10. In this case there will follow some more.
Here is my version of a simple toolbox for the fcx18 K10. Printed with a 0.4mm nozzle,heights of 0.16 or 0.12. Filament could be a silver silk one. Top parts must be glued.
This model is a front bumper for the FCX18 K10 and can be installed using the original hardware. I printed it in PETG-CF, but any material should work. I used a 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, and 15% infill. There are…
The FMS FCX24 cassis has a two-speed transmission. The transmission rod leaves on one side of the transmission for the servo and on the other side to manually lock it to one gear permanently. The side to look it always works some sand…
Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
Should be a drop-in replacement. Added a photo with my straight bumper ‘design’ as well. If you print this in TPU it will be extremely hard to break.
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
this is a part made for the FMS FCX24 because this part comes from China and takes forever to get here so I made one that will print and work for the FCX24. I now will be using Onshape for my designing because the slicer software likes it…
These are designs to replace the bumper construction or part of it. If you want another bumper design drop me a message. The best design is the single piece bumper, good clearance and strong.
FMS FCX24 Chevrolet K5 Blazer FPV camera mount for Diatone SNT Sniclo Race480 FPVBOX camera. Snaps to FXC24 frame. Prints with supports upside-down. I used double-sided 3M tape to mount the camera. Version 1 - first version, camera can be…
Warning - the mounting holes/webbing inside the cutout are not perfectly centered. The window cutout is fine, and this just means that the inside guide will only fit in one orientation. It's such a non-issue that it wasn't worth fixing…
This parts are detail for FCX18 K10 frontgrill. Look at picture of the positioning. Parts will be print with a 0.2 mm nozzle. Parts must be glued in the original grill.
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
Use this as the base for your own bed design, message me if you need a change or special version. Designed for FMS FCX24 Power Wagon Fits every FCX24 chassis As basic as possible No supports, flat print Snaps in place Tested with PETG but…
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)
Print in TPU. Glue to the rear lip of the rear inner fenders.
Crazy looking wheels! Everything gets stuck in these things if you drive over plants, but they kind of work and you can kind of crawl with them. I may try some other designs and add them here, the tires press fit on the hubs to it should…
FMS FCX24 Chevrolet K5 Blazer hitch to connect Lego Duplo trailers and carts. Base is mounted to stock rear bumper mount with stock screws. The hitch part is detachable, just press on the sides to mount or remove it. It moves up and down…
I love my FMS FCX24 for it's scale look and climbing abilities. The original bumper limited the approach angle and hooked twigs occasionally. That's why I created my own version. You need to cut the front fender slightly, to get a snug,…
This is a set of parts to equip the FunCub XL with a 15pin D-sub wing connector for all electrical connections. The plate is not needed. But my original ones were bend so i had to print new ones.
This is the speaker amplifier underbench mount that comes with Microlab FC361BT, FC550, FC660, FC360 and may be other.
Small caps I made for the FCX24M Range Rover. I didn't like the wheel covers taking up half of the roof rack, but the way it's designed they hold the rack to the roof. So I made these little caps to hold the rack in place, with the added…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
This FCXL BD380max servo adapter is to extend the BD380max servos to midi size to fit in my Fun Cub XL.
Easy to print for small printers and big printers. Best if split in two pieces that you can do in the slicer software Half cab setup. ENJOY!
Dies ist ein weiterer Akkuhalter für den FCX24m. Der Akku wird vorne quer positioniert. Der Akku kann per Klett oder Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend für Defender 110 und Defender 90!
Print 4x with the split side down and supports on. Attach to the frame rails, then install the frame rails and glue the 3d printed parts where they meet.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
Ständer für alle FCX24m Modelle Der Tacoma hat 52mm Reifen verbaut
A cover for the buttons on the FMS FCX18 remote. You will need to heat up the cover slightly to have it contour with the top of the remote. Use 1.75mm filament for the hinge. A 1.8mm drill bit may help if you can't push the filament…
Fix the biggest problem with the fcx24m, the rear biased weight distribution! Improve your climbing performance! Add a super simple winch to your fcx24m with a cheep badge reel/holder and move your battery over the front axle. All with…
A small spacer to mount a Hobbywing quickrun mini24 (or other motors with a larger diameter than 16mm and longer pinion shaft.)
simple 1/18 scale jerrycan for rc crawlers
This is a ceiling hook I designed for my FunCubXL. You need extended wing screws to mount the hook on the wing. Have fun!
Quick model of clamps that are at the end of the locker cables on the FCX10 trucks. **May need some adjustment** I did not have one off the truck for measurement. Image is a cross section at the part center. Print in orientation shown for…
Ein Akkuhalter für den FC24m um den Akku vorne zu positionieren. Der Halter wird einfach auf den Rahmen geclipst. Der Akku kann per Klett oder einem Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend…
I've created a GoPro Mount for my FCX10 K5 Blazer. It goes in the box and clips to the roll bars, no fasteners needed. Must remove the blazer box cap. Simple print, little support needed on the clips. I printed at 20% infill to keep it…
Created a new transmitter wheel for the FCX18 LC80 since it didn't have a foam ring. This is a 2 part model, glue the hub to the wheel to give it some dimension. I also included a flat version without the hub.
A cover for the buttons on the FMS FCX24 remote. Use 1.75mm filament for the hinge. A 1.8mm drill bit may help if you can't push the filament through the hole. It also includes a hole for a 3x6mm magnet.
A Stand for my FCX24M Discovery should also wor with some of the sliders for the gearbox ;)
I didnt like the flexebility of the original axle and steering linkage, so i made my own. Axle: For the axle linkage is reused the original balls. It might be a bit stiffer but it will free up in the car. Or slightly increase the size by…
El modelo sirve tanto para la parte izquierda como para la derecha del capó. Girando el modelo 180º y cortando 5,8mm se genera uno u otro lado. Intenta imitar superficie antideslizante metálica. He añadido un soporte para amarre. hay que…
Hi there! I created this mount for the fcx18 transmission that holds the servo responsible for changing from high, neutral and low gears. I could not find it for sale, except as a kit with motor and transmission so I decided to create it…
A rear driveshaft for the FCX24M. I used a 4mm nozzle and PLA
Lost one of the feet for my Caldwell Lead Sled FCX, when I pulled up the manual it said the part number for the replacement foot was 1009492, this part doesn't appear to be available for sale anywhere. They do list a rubber foot on their…
So you can tow your big trailers with your sick rigs!
I needed a slightly lower rear batteryholder for my reciever. added extra mounting holes for longer pistons. I used PLA, 0,4mm Nozzle, 0,16mm Layer, 2 walls, 15% infill
print this in the orientation shown no supports , can be mounted with double sided tape or put holes where the screw holes come up for the original bars , what i did was heat a pin up with a lighter and melted holes in the truck cap to…
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
Dies ist ein weiterer Akkuhalter für den FCX24m. Der Akku wird vorne quer positioniert. Der Akku kann per Klett oder Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend für Defender 110 und Defender 90!
Ein Akkuhalter für den FC24m um den Akku vorne zu positionieren. Der Halter wird einfach auf den Rahmen geclipst. Der Akku kann per Klett oder einem Gummiband befestigt werden. Passt auch beim Range Rover und dem Discovery. Nicht passend…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…
Created a new transmitter wheel for the FCX18 LC80 since it didn't have a foam ring. This is a 2 part model, glue the hub to the wheel to give it some dimension. I also included a flat version without the hub.