Counting matching models…
This is a stand for housing a Tripler FeatherWing. The PCB is secured with M2.5 nylon hardware. Useful for propping up and displaying Adafruit Feather boards. Tripler FeatherWing features three breakouts for each pin on a Feather, as well…
Snap Fit Enclosure This enclosure is designed to secure the PyBadge PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the buttons and display. The two halves snap fit…
Display stand for the Adafruit 3.5" TFT Featherwing Display 3mm screws heat set with a soldering iron. No threaded inserts used. Interior cup designed for up to 6600mah (triple 18650) battery pack. Printer: Ender 3 S1 Pro Filament: black…
https://youtu.be/fWEJ6m8zb0c Make a custom name tag with Adafruit e-Ink FeatherWing! The 2.13in e-paper display features red, black and white. 3D print a stand and display text and images on your desk. Learn Guide:…
A DIN Rail mount for Adafruit's Terminal Block Breakout FeatherWing. Print instructions Unassociated tags: Breakout FeatherWing, Din Rail, Terminal Block Category: Electronics
I bought a ESP8266 Huzzah Feather and 3.5" LCD Featherwing from Adafruit and wanted a table top case to put them in. I designed the case just big enough so that the displayable area of the LCD is centered in the bezel. The top and bottom…
A mount for an Adafruit () bumper for din rail. A DIN rail mount for Adafruit's FeatherWing Tripler. The FeatherWing Tripler should friction fit into the bumper but for extra security three different sizes of mounting holes are provided.…
A bumper for Adafruit's FeatherWing Tripler. It allows the access to the bottom of the board while insuring that the tripler does not come into contact with a work surface. The FeatherWing Tripler should friction fit into the bumper but…
Tonex One Controller is a great opensource project by Greg Smith which you can find here: https://github.com/Builty/TonexOneController I felt in love with that simple yet effective and great controller unit, so I designed for myself (and…
A mount for Adafruit's Terminal Block Breakout FeatherWing. It is sized for 8020 series 10 aluminum extrusion. Print instructions Unassociated tags: Breakout FeatherWing Category: Electronics
A bumper for Adafruit's FeatherWing Tripler. The mount is spaced for an 8020 Series 10 extrusion. The FeatherWing Tripler should friction fit into the bumper but for extra security three different sizes of mounting holes are provided.…
A bumper for Adafruit's Quad Side-By-Side FeatherWing. It allows the access to the bottom of the board while insuring that the board does not come into contact with a work surface. The FeatherWing Tripler should friction fit into the…
A bumper for Adafruit's Terminal Block Breakout FeatherWing. It allows the access to the bottom of the board while insuring that the board does not come into contact with a work surface. Print instructions Unassociated tags: Breakout…
A bumper for Adafruit's Quad Side-By-Side FeatherWing. The mount is spaced for an 8020 Series 10 extrusion. The FeatherWing Tripler should friction fit into the bumper but for extra security three different sizes of mounting holes are…
This is made specifically for the Adafruit 2.9″ FeatherWing (SSD1680) and Adafruit ESP32-S3 Feather when they're stacked together. The lid is snap fit and there are slots for magnets on the back of the case. There is no extra room in this…
The mounting feet of the board need to be cut off for the board to fit into the frame.
This is a mounting plate for the Adafruit Featherwing Tripler. It is installed in a Sparkfun Big Red Box.
Fantastic little case for your ESP32 Grove based systems/projects. Parts List: M3 Nuts - 4 nuts M3x20mm - 4 screws ESP32-S3: here Grove Shield: here
I didn't use any of the original model for my design, though I did reference it to apply the same shape as it's a good logical approach, so hat's off to the OG! I did make a couple of changes. I wasn't a fan of the boss/pins for one end…
This is a mount for the Grove Shield and can mount a battery, Lithium Ion Battery Pack - 3.7V 4400mAh The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can…
A simple case with a snap fit lid designed around Adafruit HUZZAH32 ESP32 v2 + Featherwing 2.4 V2. Print in two pieces without supports. Case has standoffs to screw down the board, but I found the PCB stays in well enough without needing…
I needed a reference model for a project I was working on. Sharing it here for anyone else that might need it. NOTE : This is not an official Adafruit model. Positions and sizes of the components are not precise. It should be a good…
A mount for the 2x2 featherwing prototype board. https://www.adafruit.com/product/4253 You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…
Print with the front of the display flat on the print surface. Mount the featherwing with 4 M2.5 screws & nuts. The version shown above was sliced with orcaslicer and printed on an MK3s in Prusament Mystic Brown on a hologram build plate…
A mount for the 1x4 featherwing prototype board. https://www.adafruit.com/product/4254 You will need to print one tab for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…
A way to mount a Adafruit Power Relay FeatherWing to extruded aluminum. I used it to trigger my 24v lights on my printer via octoprint.
A simple stand for the LoRa Msg design from https://www.printables.com/model/66291-lora-msg I recommend using some little rubber feet like these for non-slip operation.
Simple board protector for this breakout board.
A bumper for Adafruit's FeatherWing Quad 2x2.
