1 / 3
Magnetic Case for 2.9" FeatherWing Display and Esp32 Feather
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple magnetic case for the Adafruit 2.9" Display FeatherWing (SSD1680) and Adafruit ESP32-S3 Feather.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is made specifically for the Adafruit 2.9″ FeatherWing (SSD1680) and Adafruit ESP32-S3 Feather when they're stacked together. The lid is snap fit and there are slots for magnets on the back of the case. There is no extra room in this design for a battery since I'm using the 400mAh that fits between the esp and the display.
Materials:
- Adafruit 2.9″ FeatherWing (I'm using the grayscale one here)
- ESP32-S3 Feather (stacked on headers)
- 4× 7×2 mm magnets (friction fit but you can glue)
- 4× M2.5 screws