1,373 models
Print took around 20hrs at .16 layer height with %15 infill. The print will get stringing around the top pillars that can be removed with snips or a blow dryer. I'm really happy with the tolerances of the wheels, It doesn't have as much…
Print approx. €14.65–€17.90 excl. taxPreliminary estimate for one variant
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Hollow fender that will float with one ordinary key attached. May need to be scaled up to hold multiple keys. Print upright if you want to use multiple colours and use a generous amount of supports and a nice base like in the photo or…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Replacement stereo surround of for the Land Rover Defender TD5. Print instructions Material: PETG Layer Height: 0.3mm Infil: 30% Perimeters: 4 Top Layers: 3 Bottom Laters: 3 Support: Yes
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for PETGSource material: PET
There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a split fender design with the fenders made very short. I like to ride with my feet very close to the wheel so I designed these so I could easily find the edge of the platform nearest the wheel without having to look down or…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Call them however you want – these mini fenders have a low-profile base, so your foot placement is not hindered with this add-on-top fender. Check out my Onewheel Collection – I have also designed charging port plugs for the Pint , mini…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple fendt keychain with the current logo Print at 0.2 without supports
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is a simple, Defender style car toy that allows the user to use a simple wrench to turn nuts and bolts to assemble components. The basic print requires 1 Body, 1 Frame, 4 Rims, 4 Tires, 4 Axle Nuts, 2 Bolts and 1 Wrench. The Bumper…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
100% infill for strength. 0.2 layer height If anyone is interested in a coin fender opener please let me know and I will make one. Added coin version for 10 cent, and 1 SEK Added colorversions. Feel free https://paypal.me/gillislindstrom
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Back door for Bruder Defender.
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Hellou, # Design Concept The tools and plates are designed specifically for the Traxxas TRX-4 Defender, enhancing its aesthetic while ensuring practical storage aboard the model vehicle. Attention to detail and scale assures the…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have a Miniature Land Rover Defender for you for exhibition or diorama. Very nice model. It is suitable for coloring. My kids absolutely love it :-). It prints really well.…
Print approx. €11.76–€14.37 excl. taxPreliminary estimate for one variant
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
A Scion FRS / GT86 / GR86 car badge keychain. Print with PLA or PETG for more durability. Color shift is included in the .gcode at 3mm. Ironing is also enabled to smooth out the top layer. .stl is included if you want to re-slice with…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Sestava předního blatníku se skládá ze 3 kusů. Přední a zadní část je montována na vidlici a následný blatník je spojen středovým dílem, který se na tento blatník lepí.
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
fendt Logo and model number 313, with Gcode for manual switch of filament. in PLA.
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Fender extension for VSETT 8 and VSETT 8+, because without it everything gets dirty, even if it it's not raining. It's a SCAD-model, so if you need a different length or whatever, just message me. I printed it in 0,20mm quality with 60%…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
BUILD PLATE Adh Brim line count 10 or more SHELL wall line count 4 pattern concentric I didn't use any support I didn't use any infill
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the blaster pistol with a triangular barrel that fires energy and…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is the Bomb Launcher that fires the Alien Sticky Bombs mentioned in the original post. The Back Section print has a color change in the gcode, but it's not necessary. I wanted it since this was going to be an interactive display…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
la bague serre a maintenir la douille sur le connecteur sans quelle puisse s'écarté du a la souplesse du matériau
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
la bague serre a maintenir la douille sur le connecteur sans quelle puisse s'écarté du a la souplesse du matériau
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
la bague serre a maintenir la douille sur le connecteur sans quelle puisse s'écarté du a la souplesse du matériau
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
This is my kit card interpretation of the TIE Defender. Check out my other models printed giant sized featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
The source marked this model as adult content.
Push pin style clips. An assortent of 6, 8, 10, 12 mm diameter posts. Can easily be adusted during slicing by scaling x/y or z axis for inbetween customized sizing. Probably can print with any plastic but something like petg will provide…
QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…
Replica of Fender Stratocaster knob. I made it also for lefthand guitar! update: added the version with numbers go to 11. Now you can have an extra push over the cliff! :D update2: thanks to the feedback I have enlarged a little bit the…
Fender washers in all of the sizes typically sold in assortment packs. Parametric f3d included for custom sizes. Public domain license. UPDATE 2026-05-14: Re-rendered all STLs with correct inner diameter. Previous ID was set to exact…
New sizes added !! For Trecking bike : width 56-40mm - new size For Road bike : width 44-28mm - new size For Mountain bike : width 72-56mm Telescopic bike fenders - Front -3pcs, Rear -4pcs For mountai bike :The widht of the fender is…
1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…
Ein kleiner Engel schläft auf einer Kugel (3D-Scan) Originalgröße: 14cm lang, 9cm breit & 9cm hoch
Mudguards for the front wheels to prevent soiling from whirled up grass cuttings. The parts are only placed on the wheel suspension dome and should be held in place by themselves. The mudguards are curved upwards on the outside to ensure…
The Kukirin G2 is a well-built electric scooter, but for some reason, it only comes with a low-quality rear fender. To protect the shock absorber and myself from water, I made two fenders: one for the front, secured with two screws, and…
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
A highly detailed model of the famous Fender Stratocaster.
Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…
Mudguards for the rear wheels to prevent soiling from whirled up grass cuttings. The mount is placed over the axle and secured at the bottom with a screw. The mudguard is pushed over the dovetail onto the mount. I've printed them with 0.2…
I ran against time to also present this other project: my Fender Stratocaster Squire from the 90's; a iconic, evergreen guitar. I hope you enjoy printing and assembling it; above all I hope it can be printed and assembled well , since I…
A brick-wall of an owl that is fearless and calm. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate only…
This is my current version of the Rockshox Zeb bolt on front mudguard/fender. Fits 27.5" tires, not sure yet about 29". If you print it for a 29er and there is clearence issues please let me know so I can adjust the model! Mounts using 3x…
Front light guard for my Traxxas TRX-4M Defender. I printed mine in resin and glued them on. Print some spares as the thin tubes might get broken in print (0.5mm in diameter). I printed 4 at a time and one guard had one bar broken.…
Only included a step file with the designs, so its easier to modify if needed. I know the side panels dont line up perfectly with the fenders, because they were designed separately and I put them together in one file. They should fit…
If necessary, the model can be cut in the slicer and the scale of the model can be increased.
This is fender extension for VSETT 10+. No more dirty scooter suspension. If you want extend length of fender, extend it by rubber else if you extend 3D model too long, fender can easily hit ground when jumping off the pavement. You can…
This front fender is a two piece design that contains a front and rear piece. It was designed for a 29 inch wheel setup, so it will look slightly different with 27.5 inch wheels. Printing Instructions: At least 30% infill (I used…
Printable 3d emblem for Fender amps, speakers and guitar cases etc. I made a couple of variations with/without base and holes. If you want to print exactly what I printed and uploaded on the picture use the 2 layer version and make a…
I modeled these inner fenders to be lightweight (0.8mm Thick) and able to be installed with the factory screws. I recommend printing in PLA with a 0.4 nozzle with support and the bolting surface down on the print bed. All Parts are…
Electric Guitar model based on Fender Stratocaster. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok. To avoid supports, neck is…
seat mount for the traxxas trx4 designed for the defender. import 2x in to slicer and mirror 1 to get both sides
A simple guitar pick with Fender logo.
Printer: Mega X Filament: black PLA Note: Scaled to 420%
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
After i designed Hingeep, my smaller print in place car I've got this idea - lets make model of real car, and I've chosen classical terrain car, Land Rover Defender 90, with look from 80's. As you can see on one picture, maybe box isn't…
Its a fender flare. You can screw it to your models or glue it. I made it for my Tamiya TT-02. Outer Diameter ~88mm.
Materials: 3 x M3x8 mm screws; 3 x M3 mm nuts; 2 x pieces of tube's rubber glued to legs base. 1 x A4 1 mm thick plastic file cover or print this part if you have a large print bed. Print Settings Supports: No Resolution: 0.2-0.24…
This is my first upload to thingiverse and my first attempt to make a 3D model of a Land Rover Defender in Fusion 360 and print it on my new 3D printer. Biqu B1 from BigTreeTech. There is room for improvement but I'm still quite happy…
Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…
Model courtesy of the excellent folks at the Helldivers archive, uploaded as an STL for your optimal printing experience
Just a mix of deferent xiaomi fenders Print instructions Print with supports
Ich wollte meine eigene Löthilfe entwerfen und sie noch etwas verfeinern, daher habe ich in der Mitte zum einen um Filament zu sparen, zum anderen um die Station irgendwo festschrauben zu können, ein paar Aussparungen eingefügt. Viel Spaß…
Fender liners for the TRX-4M Defender. These attach with 4 screws per side. They work fine with the standard screws but I would recommend M2x6mm screws for the bumper attachments. These are cut to accommodate the mudflap mounts I made.…
Tuttio Short Rear Fender – Low Profile Tail Tidy This is a clean, low-profile short rear fender designed specifically for the Tuttio electric dirt bike. The goal of this design was simple: tighten up the rear end, remove the bulky stock…
A base and suspension protectors are included in the files, using good PETG would be sufficient, but it is not a bad idea to use more resistant materials, especially those that are water resistant. Apart from the printed parts, the…
Type-10 Defender model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
I took the model from RobRoy, a single fueltank/car box, and copy/past another one, glued them together in TinkerCad en made it fit my TRX4 Landrover Defender's roofrack. That's all I did. The model from RobRoy had a lid and holes to…
Not my file. Reuploaded for my collection Thingiverse thing:5752468 by Superknutselsmurf
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
Land Rover Defender door lock bezel. I tried to make the design as similar as possible to the original. Requires supports to be printed. I got some pictures as example. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
This remix is focused on printability and durability. Parts has been tweaked or fully remodelled to better suit FDM manufacturing with regards to layer lines etc. Print each part with the orientation shown in the Schematics. The barrel is…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Stitched the HSH pick guard back together with TinkerCAD to print on a 350x350 print bed. Will test this weekend.
Modified to for the Onewheel XR
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20788 Thanks for your…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20758 Thanks for your…
Not my files. Reuploaded for my collection Thingiverse thing:5787531 by alfringant
This is my version of the display strand for the TRX4m. I've added a small tray between the axles for screws or small accessory pieces. It's available for the Bronco and Defender with matching text on the side.
2023-11-15 These front inner fenders are designed for the FMS FJ40 Cruiser (1/10th scale). The left fenders encapsulate the servo for the steering wheel and have a slot for a battery strap. These parts were designed and fitted, I didn'…
Remix of a Stratocaster pickguard modified to be printed in 3 sections with joints to easily connect sections. .stl files for each section are provided, as well as the .f3d file that I used to edit it in fusion 360. I printed sections in…
Das Modell habe ich mit Fusion 360 erstellt, mit 0,10 mm Detail und Stützen “gesliced” und mit 100% Infill in PLA ausgedruckt.
This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…
Inspired by some examples I have created this bracket to mount the license plate on the Piaggio Zip scooter without fender. You have to add two M8x20 bolts and lock nuts to mount the two halves together. The frame can be mounted on the…
I reworked this model to fit RC Land Rover Defender (MN90, MN99, MN99S) rims. Printed with FIBERFLEX 40D and theyre a bit stiff. Print Settings Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 100% Filament brand: Fiberology Filament…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
This is a simple to print exhaust model for a TRX-4M Defender. It approximately follows the position of a real exhaust, but with a bit of tuning look (big diameter straight tip). There are 2 models - main body to be mounted on frame-you…
Notes: These ONLY fit the compact style Zuca cart. I want to give credit to @Tomoholk as I referenced a few measurements from their model from a different type of cart. Parts list: Number of items File Name / Hardware x1 Frame x1 Frame…
I've already explained most everything in the “differences between remix and original section”, but this is the result of remixing the original XL phone mount to fit phones with large cases, in my case an iPhone 14 Pro Max with an…
Extension for the rear fender of the Apollo City / Trittbrett Fritz E-Scooter. Protects the rear suspension from getting dirty. Printed in whatever you like, add supports. See Pictures for print orientation! German Community Thread:…
