Counting matching models…
The hook that holds the parcel tray broke and the parcel tray could no longer be raised. So I designed a fast and cheap solution. You only need to print ed place the 2 pieces. For a better fixing you could put some glue . DON'T PRINT IN…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Broke clip that holds the rubber mount for the parcel shelf so knocked up a replacement that seems to hold up well. I had a bit of stringing with my PLA which has sat for a few weeks in a cold room so could be wet. Printed in PLA and…
Replacement for the stupidly designed clips used to hold the parcel shelf onto the strings in the boot on the Mk8 Fiesta Ford Part Number 2423830
Multi material shift knob designed for Ford Fiesta ST 6-speed. Intended for printing in multiple colors, Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: Yes Resolution: 0.10mm Infill: 50% Filament: Hatchbox…
Ford Fiesta/Fusion MK5-MK6 (2004-2008) Hood Prop Rod Clip Also work on Ford Escort/Orion 1994 (Thanks @DavideRusso_3941551 ) Print from PETG/ASA/ABS Infill 40-50% Support needed!
Prints with no supports. Fits Fiesta MK6 / MK7. Has a positive stop preventing complete drawer pull out. Closely fit dashboard curves.
.2 layers, print at layer 21, put your key in (have a pillow to keep it up) resume print. You may need a physical key holder for your fiesta st.
Fiesta Mk7 / Mk7.5 Card Slot MagSafe Phone Mount Description The Ford Fiesta Mk7 and Mk7.5 offer very limited options for securely mounting a phone in a sensible, driver-friendly position. This becomes even more problematic when using a…
Replacement bushing for the IB5 manual transmission, used in various Ford models such as: Focus, Fiesta, Fusion, C-Max, etc. Designed as a direct replacement for the gear shift selector bushing, which commonly breaks over time and causes…
This is to plug a hole, behind the rear taillights, that comes from the factory covered in tape. The tape can degrade and may leak after years of use. This part should snap-fit into the hole, but also add RTV on the interior flange, and…
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
Questa boccola serve per collegare il pomello nella maniglia alza vetro posteriore ford fiesta. Realizzata in pla con una restenza del 20%
Get the 4-pack bundle on Etsy: https://cookystl.etsy.com/listing/4481811255/4-piece-bull-head-hola-western-themed Commercial license available here: https://www.patreon.com/CookyStl Bring a festive and lively touch to your baking projects…
Ford Fiesta mk5 JH, JD, interior side mirrors cap. I tested with PLA but you need to print with high temperature filament (may be ABS, ASA or PETG)
I’ve always found the fiesta ST’s lack of a solid place to rest my foot annoying, so I made a 3D printed part to correct it. LHD cars only, will also fit non ST fiesta's of same generation. A few pieces of hook Velcro will secure it to…
Never be caught short again with my versatile coin and contactless payment holder. Designed specifically for Ford Fiesta 2011 owners, this compact accessory features a secure coin compartment to keep your parking fees organized. The…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Cassetto modificata parte inferiore per appoggio totale sul piatto di stampa senza Supporti ,i Supporti vanno messi solo sulla Maniglia
Refueling Funnel for Ford Focus Fiesta Courier No Supports
Ciao, siccome il fondo non veniva regolare e dovevo mettere dei supporti ,ho eliminato un pezzo sul fondo del cassetto così poggia orizzontalmente sul piatto di stampa senza supporti ,quelli li ho messi solo sulla maniglia ,e poi siccome…
This is a phone mount specifically designed for the Ford Fiesta MK7/JA8 models produced from 2008 to 2017. Unfortunately, the interior console design makes it challenging to fit any standard phone holder without obstructing the view or…
Cigarette lighter plug cover for Ford Fiesta 2008-2010 with text "Ford".
Ford Fiesta MK5 / 2002 TPU Breaklight Cover inside of the Trunkdoor
A remix that is flat for easier printing. Includes two versions, one that doesn't need supports
Description FORD FOCUS ST UMBRELLA HANGER I took inspiration from the model and modified the model allowing for a more secure fit and adding the ST logo for Fords! It all looks very nice and makes everything more racing! Print it and…
Fusion de Fonctionnalité et d'Art : Adapteur de Jauge de Turbo Ford Fiesta 2005 Plongez dans un monde où la fonctionnalité rencontre l'esthétique . Avec mon Adatateur de Manomètre de turbo pour une Ford Fiesta diesel de 2005, il se place…
A simple blanking plug on the dashboard of a Ford Fiesta. The cover has a hole for melting
Habe einen Schalthebel für meinen Fiesta konstruiert. (Natürlich nur für den gebrauch auf Privatgelände ;) ) ist zufällig genau dieser Durchmesser der so etwas stramm aber dennoch gut drauf und wieder runter geht. Die Manschette kann…
Reverse engineered a replacement of Ford Fiesta MK6 (02-08) mirror adjuster knob mount thingy for the gaiter Made for a mate and printed in PETG so it wont warp when it comes to summer I originally uploaded it to…
3D Ford Fiesta Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
3D Ford Fiesta Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover For Ford Fiesta MK5 facelift (2004-2008) Left and Right version (Different) Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: Min. 50% Filament: ABS/PETG/ASA
Ford Fiesta/Fusion MK5-MK6 (2004-2008) Hood Prop Rod Clip Also work on Ford Escort/Orion 1994 (Thanks @DavideRusso_3941551 ) Print from PETG/ASA/ABS Infill 40-50% Support needed!
Hey there, so I was bored and thought hey, why not design something new and voila the next keychain design was done. I can add logo's from personal business, feel free to contact me. Donations are always welcome to support future projects…
It was necessary to replace the original speakers in my old Ford Fiesta Van Mk4. As the ones that were there were specific to the car model, I made an adapter with the same dimensions to take new speakers with 10 cm or 4 inches. At the…
I often swap phones, so i needed an easy way to also create a holder for another phone, without having to print the hole holder again. I've provided models for two phones: Samsung Z Fold 3 and Samsung Galaxy S23 Example photos are…
San Antonio Spurs Fiesta Oversized Necklace Logo
Another part for my Fiesta Mk4. This time it serves as a support for the acrylic panel that divides the loading area from the area where we drive the car. As I couldn't find the part anywhere, neither used nor from the brand, I tried to…
Made a 3d printed boost gauge holder for my fiesta ST. Works for a 52mm gauge. The gauge used in the picture is a Turbosmart boost gauge. This part replaces the vent thingie. that lets you control the air flow, although it still lets air…
Phone Mount for Realme 8 Pro – Ford Fiesta MK6 (CD Slot Mount) This custom mount fits securely into the CD slot of the Ford Fiesta MK6. It supports the Realme 8 Pro as well as other smartphones with similar dimensions. The design includes…
I bought the usb module from aliexpress. I have included a photo of the usb module because I'm worried that a direct link will not be always available. I've found it under the name “10pcs 6-24V 24V 12V to 5V USB Step Down Module DC-DC…
I recommend tree supports so it is easier to remove the supports from between the rings as shown in the pictures as well as 3 walls so its as strong as possible. Heavily recommend PETG or ABS if you want to be able to remove it again…
2-DIN bracket for 2009-2018 ford fiesta front facia 381114-20-1
The rubber brackets for the top of my ford fiesta radiator had worn out resulting in the radiator rattling a lot, OE replacements costed about $11 each, figured I could do it cheaper with TPU.
Ford Fiesta/Fusion (2004-2008) Diesel/Petrol Fuel cup bowden. Print from flexible filament (TPU/TPE/Ninjaflex etc.). Infill 30-40% Print Cut out the original hard plastic ring from the cup. Use a little grease on the ring for freely…
Print Settings Printer Brand: Creality Printer: Ender 3 V3 KE Rafts: No Supports: Noc Infill: 100 Filament: Porima
Added a holder for a balljoint. Best print with ABS, PETG or any other heat resistant filament.
A 6.5 Inch speaker fits in this Made the model with only pictures and it worked. Made it for a friend of mine
Intended for use with Fiesta ST six speed gear shifter, includes modifiers for infill. Remove M6 mounting holes from the shifter base back to the metal collar. This allows M10 bolts to be used Hardware list M8x45 x2 M8 x 30 x2 M10 x 30 x2…
When retrofitting power windows, you need to cover the hole in the door card that was originally for the manual window crank.
Being printed plastic these tools will not be as tough as the metal versions but will do the job with care. Would suggest 4 perimeters for strength. Use paint on supports to avoid material on the threads You may wish to slice the threaded…
Maybe you should make z axis bigger, i printed on ABS with my ender 3 v3 se, It will work I already have one on my ford fiesta
Material ABS 0.2 layer height 0.4 nozzle diameter Print setings (from what i remember) 4 wall count 4 top solid layers 40% infill Tree Suport Suport contact distance = 0.15 Suport interfacing layers 3 Suport interfacing layers spacing…
For use with ANT 1.6 EcoBoost ECU kit, allows fitment of the Mk7 2013-17 pedal to Mk4 pedal box. Intended for RHD cars, may work on LHD but untested. 3D Printed Pedal is optional, this kit will work with unmodified pedal but the 3d…
Cale-pied personnalisable (couleur inserts) pour Ford Fiesta ST dernier modèle. Je pense compatible avec les Ford Fiesta standard, mais pas essayé. Perfect Fit sur la ST. Fixation à la moquette par scratchs adhésifs au dos.
Prints with no supports. Fits Fiesta MK6 / MK7. Has a positive stop preventing complete drawer pull out. Closely fit dashboard curves.
Needed a replacement asap, so I decided to design and print it while doing other stuff on the car. Worked like a charm. Printed in PETG, 3 walls, 20% infill on Creality K1. Use Supports for only for the overhang of the outer diameter.…
The individual holders replace the vents and should snap in place. The twin holder requires bonding in and the panel modifying for the gauges to fit. The retainer version is meant for Autometer or Stack Gauges and helps level them. It…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
Parts to use a 3rd party wireless charger in a Ford Fiesta MK8 with an iPhone
Celebrate the spirit of Día de los Muertos with this vibrant Hueforge design full of festive energy and charm. Two smiling sugar skulls wear a sombrero and floral crown, surrounded by maracas, hearts, and blooming cacti. The bold blue…
Thanks to its robust design, it will safely hold your can of Red Bull or Coca-Cola, even if you push your Fiesta to its limits. recommended materials: PLA/PETG
Just print the parts, any heat resistant filament will do the job. BTW, will need to glue the fangs to the the clips, i just use CA.
I liked @Depa_638714 ‘s a lot but for some reason my MK4s didn’t give the “ST” logo a proper finish so I went for a 2 parts solution after having experimented with wheel hubs in the past. Like I said above the pocket in the main part is 1…
This is a drop-in replacement tray for the middle console of the Ford Fiesta MK7 and MK8 (UK models) . I designed this because my new Fiesta did not come with one, and the original Ford parts are known to fit poorly, shrink, or warp over…
Hi, this model is a replacement part for my old car (Ford Fiesta, build date 2009) where the release mechanism for the engine hood broke. The plastic part that holds the Bowden wire and acts as the release lever for the hood broke and…
Ford Fiesta Keyring You can find all my models here , thank you who will appreciate with a download or with a like
Have a 22mm rear sway bar from whiteline, dont have the spacers? I bought one without it attached, whiteline was nice enough to send me the spacer. But in the case they dont - I took the one they sent and redesigned it so you can send it…
My Ford Fiesta's antenna went missing, and only the spring part that made the antenna flexible remained. I unscrewed the spring, removed the rubber coating and made a model based on that. Note: The antenna will no longer be flexible, but…
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
.2 layers, print at layer 21, put your key in (have a pillow to keep it up) resume print. You may need a physical key holder for your fiesta st.
Just a Ford Fiesta Fixings Trim Clip to hide the screws in varius part of the cabin
All of the phone holders I had at home had the same balljoint diameter, so I assume this is a standard for most regular car phone holders. Printed in PETG, holds up fine so far.
Phone holder inspired by the Brodit phone holders that clip between dashboard panels. Available just as a base (in stl or stp) for own modifications or as a Magsafe variant. Fits the Ford Fiesta MK4 or the (1997-2002) Ford Puma - LHD…
While designing a holder for the Samsung S25 , I ran into the problem that I wanted a fully 3D design without using supports. At the same time, I needed a clean and stable way to connect a ball joint socket to the flat back surface of the…
Mine is a 2016 Fiesta mk6 "plus". Other adapters I found online were too small and none of them fit my headlights, so I've made this one. Use high temperature resistant material. Use at your own risk.
Fiesta Mk7 / Mk7.5 Card Slot MagSafe Phone Mount Description The Ford Fiesta Mk7 and Mk7.5 offer very limited options for securely mounting a phone in a sensible, driver-friendly position. This becomes even more problematic when using a…
Replacement bushing for the IB5 manual transmission, used in various Ford models such as: Focus, Fiesta, Fusion, C-Max, etc. Designed as a direct replacement for the gear shift selector bushing, which commonly breaks over time and causes…
This is to plug a hole, behind the rear taillights, that comes from the factory covered in tape. The tape can degrade and may leak after years of use. This part should snap-fit into the hole, but also add RTV on the interior flange, and…
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
Made an Airventclip for various mounts (preferbly my smartphone). This is just the Clip so feel free to add your own remix to the bunch. Perfectly clips onto the part with the airvent dials in the middle of the console of an Ford Fiesta…
Questa boccola serve per collegare il pomello nella maniglia alza vetro posteriore ford fiesta. Realizzata in pla con una restenza del 20%
Get the 4-pack bundle on Etsy: https://cookystl.etsy.com/listing/4481811255/4-piece-bull-head-hola-western-themed Commercial license available here: https://www.patreon.com/CookyStl Bring a festive and lively touch to your baking projects…
Ford Fiesta mk5 JH, JD, interior side mirrors cap. I tested with PLA but you need to print with high temperature filament (may be ABS, ASA or PETG)
Battery hold down for the 2014-2019 USDM Ford Fiesta ST. Might other ST models.
Fuel flap for Ford Fiesta MK6 (2013). Printed on a resin printer Anycubic Photon Mono 4K,. Perfect fit on my car ! Designed with Blender and Openscad
Taken from https://www.thingiverse.com/thing:2412682
This is a modular phone holder designed specifically for the Ford Fiesta Mk7 dashboard. Unlike vent mounts or suction mounts, this design clips around the factory radio display surround, providing a clean and secure mounting position…
