299 models
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
The oil filling funnel can be printed in two different modes of your choice: with 3 perimeters only w/o infill* vase mode with non standard double wall thickness (0.8 mm)* Other useful informations: outer diameter of the funnel outlet =…
With this model you can modify the filling and perimeters to be able to print a functional piece. Print instructions Licence: Creative Commons - Attribution - Non-Commercial - Share Alike
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
(german version below) Filling machine "Hanimandl" for filling defined quantities (e.g. 250g or 500g) of honey or other liquid products, such as mulled wine. The machine in action More videos on my playlist Building instructions Building…
Instructions: Add an standard Gardena o-ring. Attach the hook to your Gardena Hose Connector and start filling that barrel. Printing Recommendations: Print orientation: As loaded Supports: Optional Layer height: 0.2 mm I re-modeled the…
Gardena pool filling adapters in various sizes; sizes 20-100mm have been prepared for download. The download model has the respective width included at the end of its name. Easy to print due to the raised surface area relative to the…
Using test 1 and 2, check if your capsules fit properly. If needed, you can adjust the size using your slicer. 🌟💊 (edit The majority of users scale their prints to 103%.) With this handy 3D-printed device , you can effortlessly fill 50…
I didn’t realize that the Mighty+ doesn‘t ship with a Filling Aid tool like the original Mighty did, so I went and made my own. This model should fit the Mighty/Mighty+ and Crafty/Crafty+ from Storz & Bickel. Since the tolerances on the…
Gardena pool filling adapters in various sizes; sizes 20-100mm have been prepared for download. The download model has the respective width included at the end of its name. Easy to print due to the raised surface area relative to the…
Simple top filling mold for new rubber bait a simple way to recycle your old and torn baits, just put your rest of baits to bowl and put it to microwave, then just pour that rubber to this mold, we are using abs or nylon bacouse of heat…
easy printable practical fishing lure mold / form for 5,5cm rubber fish
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
The model comes in multiple parts, all can be printed without supports - the symbol needs to be glued in and is about 0,1 mm recessed so no multi material or multi color printer needed
The height of the model is 10cm. The wall thickness is 3.5mm. The diameter of the upper bowl is 70mm. The outer diameter of the lower bell is 3.8mm. Printing with supports. Tested on VW Touareg.
Quick model to make it more convenient to fill water balloons for the kids. It's a nozzle that fits standard garden hose threads (NH-11.5, female). The model has a 40mm long nozzle (easy to grip) with an OD of 10mm and an ID of 4mm. Even…
Someone i know wanted to print the version i remixed it from, but the bowl and cylinder itself was too tall for her purpose (chickens that are currently under a heat lamp), they would potentially drown because of the water level. So i…
Printable fishing mold for rubber fish (Top filling) Enjoy
The model can be placed on a 10-cup beer pong formation to fill all cups with approximately the same amount of water at the same time. For reasons of hygiene, beer should not be used and the filled cups should not be drunk from. You can…
Pissed off with another cleaning of spilled silicone gel balls - I quickly made a funnel for filling containers. Two versions - one printed straight, the other in vase mode. The normal version takes a little over 20 minutes to print but…
This is a bottle I made for making filling my small Speedloaders more conveniently. Just pour BBs insinde the bottle or use it as a shovel inside the BB bag, put on the lid and fill your speedloader. Use the cap to close the bottle and…
An excellent tool for making snowballs :))))))))))
Storz and Bickel Accessories Filling Tool Funnel Storz and Bickel make great products; however, one of the biggest issues with the filling tools is that it's difficult to fill. Plant matter gets stuck in the center and falls out the side…
Hello! These are some stencils I turned to 3d models for printing at home as my wife saw something similar on social media made from a thin plastic sheet and asked if I couldn't just print some myself. They should be 76x150x0.75mm which…
This tool slides onto the side of your aquarium and allows you to top up the water without stirring up any muck or substrate. It does this by redirecting the flow of the water parallel to the sides of the tank and absorbs some of the…
This slides over the top of a XMax v3 Pro flower vaporizer. It lines up with the oven so you can fill it more easily without getting crumbs all over
If you want a add a rocky self-filling water bowl for your terrarium. It is flat, and safe for smaller reptile.
Edit 17-6-2023: Thread has been made stronger and made more easy to place the bottle. The bracked now has an extra screw hole and fits better with the bath. Description: New version of the automatic bath. Fits standard soda bottles for…
easy printable fishing lure mold for 10cm fish
This is set of fillings that enhance default bases of warhammer miniatures. It fits exactly into the “empty” space in the base and contains dedicated space in the middle for magnet placement. Size of supported magnets are 3 or 5 mm in…
- Print upside down - Enable supports - I printed at 0.12mm layer height Hope you like it :-)
Need a replacement stand/Filling Chamber Tool you could 3d print fdm by placing logo below plate and print flat, however better suited for resin printing
Trichter um an der Yamaha XS 650 das Motoröl einzufüllen. Version v1 ohne Nase; Version v2 mit Nase um an den originalen Mikuni Vergasern zentriert werden zu können. Gedruckt mit vier Perimeter ohne Stützmaterial. Probedrucke wurden mit…
This is a simple funnel that makes filling coffee beans into the 1ZPresso JX-Pro grinder faster and less annoying. As it comes stock it's relatively easy to both spill beans over the side as well as having them sit in the adjustment…
Ever wish you could fill less than 40 dosing capsules? Ever wish you didn’t have to fill 40 of the same strain? Now you can fill you capsules in increments of 5! Don't use supports, print flat bottom down.
Added a bunch of 2mm ventilation holes for the tube to be filled with Silica Dessicant. Kind of adding an extra function to the thing printed in PETG (if you want to dry the hole spool centre in a filament dryer, if not PLA is enough.…
Just another moss pole? Nope, it's the culmination of all moss poles! The opening size of the pole elements has such a size that organic materials (e.g. sphagnum moss) as well as anorganic materials (e.g. pon or expanded clay) are secured…
Using test body and test top, check if your capsules fit properly. If needed, you can adjust the size using your slicer. 🌟💊 (edit The majority of users scale their prints to 103%.) With this handy 3D-printed device , you can effortlessly…
Weight weenies rejoice! Here's an M5x0.8 screw with a T10 (Torx) head designed to fill unused holes on a bicycle frame for water bottle cages and similar. More secure than press-in plugs, and lighter than most of them when printed for…
This is a remix from a couple different T-Slim Filling Tool models - made to align the cartridge with the syringe for easier refilling, especially for those with limited mobility, or younger children who may need help while remaining…
created a little funnel to help aid in filling the desiccant
This is a parametric OpenSCAD model for producing filling systems for casting metal using sand molds. It implements the principles developed by Dr John Campbell in his casting research. These principles are summarized in the attached PDF…
I wanted to have a nice looking teabag dispenser that can also fit under a hanging kitchen cabinet. I used a rail to mount it, just slide it out to refill. In the end I moved it elsewhere but kept the system. May it be of use for someone.…
Presenting two Hexagonal Customizable Bracelets. Due to the lack of a multi material unit in my home, I decided to create another customizable bracelet with a pretty easy build. ( oval inside 62mm x 46 mm ) Print instructions Bracelet:…
Made for Storz & Bickel Volcano Stock one hybrid filling chamber in this little round safe. Screw cap & logo insert.
This model is compatible with the lego system.
would always spill when trying to pour from the tray to the filling aid, I still do but now not as much lol.
My Mom bought a new VW Passat B8 and we still had a bit of Diesel at home. The only problem with it was that the Diesel was in an gas can. The funnel we use for all the other cars works just fine. But on the new one it doesn't. Newer Cars…
Scuba tank dust cap with indication whether the tank is full or empty. Just put the cap on the way you need it to be, green in front after filling the tank and red in front after a dive. The cap has a recessed hole at both sides to make…
Remixed mmOne's pasta press to have bigger cavity
A tool that helps with filling dosing capsules.
DEUTSCH: Das ist eine Docking Station, ein Kapselaufbewahrerhalter und eine Befüll Station für die Dosierkapseln für den Norddampf Relict Vaporizer entwickelt. Die Befüll Station kann jedoch mit jeder Dosierkapsel mit dem Durchmesser von…
I love the SMD boxes designed by KIL0 but found them pretty difficult to fill. Therefore I designed this simple funnel that lets you open SMD tapes over it catching them, then you can pour them into the box.
My daughter wanted to fill some water balloons, and we couldn't find the one that came with the water balloons, so I made a few in different sizes. They are knurled so easy to screw and unscrew. Enjoy! You can print in which ever filament…
Simple petit entonnoir idéal pour recharger les emballages souples de sucre, en utilisant du sucre en paquet, bien moins cher. Simple little funnel ideal for refilling sugar squeeze packs, using much cheaper packaged sugar. Ender 3 / PETG…
UPDATE Added a version with room for magnets.
A small device that helps fill the capsules. I am always grateful for suggestions for improvement
Funnel for Refilling Miele Twindos Bottles Save money and reduce waste with this custom-designed funnel, specifically made for refilling Miele Twindos detergent bottles. Miele’s Ultraphase detergent bottles can be expensive, but with this…
This project includes all files to reproduce space-filling and ball-and-stick models of all canonical (= standard) amino acids at a scale of 100,000,000 : 1. Simply load all .stl files in the respective folder at the same time into…
Prints in two pieces. The Funnel support legs will need a small amount of support themselves when printing (See Pic.) Funnel legs slide into the top of the cage base. You can add a dab of glue if they are not snug enough. The funnel…
Printing Instructions Model is already in the correct orientation to print (wide opening against the build plate). Print at 0.2 mm layer height. Does not require supports or a brim. Use the Arachne wall generator to avoid gap infill…
I designed two sausage filling funnel for my manual mincer, in two different output size. Output diameters are 34mm and 28 mm. Check the drawing for the machine side dimmensions.
It was positioned to align with the 200mm round bed size of the Flsun Q5 printer in use.
Die Ladestation der Worx Landroid-Modelle ist für Rasen ausgelegt, der durch das Gitter wächst. Liegt die Ladestation auf Stein / Beton, dann hat das Vorderrad Probleme beim Ausparken. Es muss über das grobe Gitter fahren und die…
Hierauf könnt ihr den Inhalt des Grinders schütten und dann in den Vaporizer füllen. Es stehen zwei verschiedene Größen zur Verfügung. Bei Bedarf könnt ihr die inneren Flächen mit feinem Schleifpapier glätten. You can pour the contents of…
erleichtert die Befüllung durch die erweiterte obere Öffnung von original ca. 44mm auf ca. 75mm Kann auch als Erweiterung verwendet werden. Kann im Slicer nach belieben gekürzt werden. https://www.artme-3d.de/produkte makes filling easier…
A 000 size pill/capsule filling machine designed to fit cap bodies snugly so they do not fall out! If the fit is too tight, scale all parts up a bit, but not in Z axis. Put the tray in the holder, populate with 30 000 caps, add your…
UPDATE Added a version with room for magnets.
GoPro Hero 5 / 6 / 7 Dummy. There is a “normal” version which has the size. And then there is the “sand” version + the Nuspi to close the sand version. If You need the weight or you wanna test something, but do not want to risk the GoPro?…
Large funnel that I needed to transfer protein powder from a large jar to a smaller one. But nevertheless can handle large quantities of whatever you want to fill large opening jars or anything similar. Upper outer diameter 190 (inner…
Designed like a 1930's filling station. Printed in petg on Prusa Mini. Would easily be updated for other brands.
Plan on adding tamper. Printed this on Bambu X1C with 2 wall loops and 15% infill.
EN: As I needed a smaller version of the model fom VVulture, the funnel broke off at the tapered part of the tube. It's not the designer's fault, the reduction in size made the tube too thin at the transition. Also needed the handle on…
New and improved model now available. Also regular and long versions. Remember to let this cool down before removing it from the build plate. Print as rough as possible, it will still work well (I printed 0.7mm layer height with my 0.8mm…
Since I needed a small scoopl that would fit in my silicagel containers without dropping silica gel beads everywhere, I created this one that fits my needs perfectly. Print it face down. No support need.
Simple, nice print with MMU. i used PETG printing the parts solo, without MMU should be fine as well. Check out my MMU Electronic Cap as well ;)
Wanted a funnel like this that would fit the J-Max's smaller opening without the unnecessary center bits. As a bonus it fits inside of the carrying case with the handle ball inside of the cone (hope that's visible). Its 83mm outside…
Was created for filing a chemical substance in a cleaning bottle.
STORZ & BICKEL Dosing Capsule Filling Tool with added bottom holes for easy filling of your medical herbs. Cheers
A fully solid cylinder can be quite heavy—proceed at your own discretion. This design is one I personally created and use. I printed it in PLA with a 0.24mm layer height and 20% infill. Supports are required. Print duration may be long or…
Der Adapter ist so klein, dass Sie ihn nie wieder suchen müssen; er kann immer am Schlauch dran bleiben. Das spart auch eine zusätzliche Halterung. Der Schnellverschluss kann aber auch jederzeit problemlos abgezogen werden. Die 6…
Just fix this handle in a hole of the spool by using a rounded head M3x25 or M3x30mm screw. You can use the printer spool holder for the destination spool and a ball bearing spool holder for the origin spool. It takes around 10 minutes to…
Meridol toothpaste refilling tool designed for travel size 20ml and 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm Layer height: 0.1mm…
A simple 2 holder toothbrush stand for Oral B toothbrushes. Designed in 2 parts, with the aim that it can be filled to add mass(I filled mine with 1p coins). I used the head of the item I have remixed because... well I am lazy so why not.…
Dishwasher Salt Filling Funnel Designed this funnel to fit our NEFF dishwasher as it didn't come with one provided. It makes filling the dishwasher with salt an easy job. It may well fit other makes as well, don't know but the tank filler…
Dispenser for pills - 7 days, locking the metering, easy filling Medication for a whole week. Easy filling thanks to screw cap. Dispenser position locked by spring mechanism Diameter 62mm, height 32mm. Next you will need: 1x Screw M3 x 8…
If you have the hand coffee grinder Comandante MK3, you propably know the problem of beans getting stuck in the center where the crank is attached. The funnel (my first 3d object for printing) covers this recess and enlarges the bean-drop…
Self-Refilling Birdbath with Perch A birdbath which keeps a consistent water level by refilling itself from an attached bottle. It has a perch on either side for the birds to sit on. Mountable with zip ties. The support needs to be glued…
Magnetic lid tailored specifically for KitchenAid mixers (4,3 l bowl). This unique accessory not only ensures a snug fit to prevent spills but also comes with a convenient filling slot, allowing you to add ingredients seamlessly while…
This design is for a drink coaster, based off the Hilbert space-filling curve. I have included a few pre-rendered high resolution models, as examples. Or if you just don't have OpenSCAD installed.
Holds Kaweco Sport convertors so you can fill them up easier if you have hands too large to hold them. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Filament: esun PLA+ black Category: Office
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
PET bottle self-filling chick water bowl compatible with any standard PET bottles (PC1881 thread, usually water or soda bottle). Used thread model: https://www.thingiverse.com/thing:2693686 I recommended to use PETG or other…
Have you looked around for the perfect capsule filling machine design for a 3D print and been disappointed that they don't live up to the ones you can buy? Put those experiences behind you with this retail grade capsule filling for size…
Great filling tool for my inox nespresso capsule. I bought the inox capsule online, should works with all of them! No 3D printer? JLC3DP offers fast, affordable 3D printing with instant quotes and quick delivery. Check it out:…
This is a Plug for the Miele Power Disk with 15mm hole. Unplug to infill the Powder. With this plug you can cover the hole until next refilling. see also https://www.printables.com/model/1272285-plug-for-miele-autodos-powerdisk If you…
Longer than the original
My wife needed a wide Funnel to fill glass bottles of different sizes with preserves and she used a cutoff plastic bottle. Will fit in a bottle with 53 mm diameter opening or larger THIS IS THE SECOND VERSION I made this funnel from PETG…
Now its easy to fill the dishwasher with water. No more annoying splashing
A tray to aid filling of Tinymight 2 dosing capsules, sized for the official capsules. A flat area is included to lay the prepared herb, and then a number of holes for the empty capsules to be added. It might be worth printing out the…
