Counting matching models…
Finned lamp shade I created. Consists of two parts: top and fin. There is 1 cm hole in top for cable, rod, whatever you want to use. You will need to print 17 fins. After printing all just slide fins into top part, no glue needed. Use…
Inspired by similar design I made this in 3D studio max using a shape and the loft modifier as it allows detailed control over scaling, rotating etc. I made this to test printing with larger nozzles and have successfully printed it in 100…
This lamp shell is made for LED lamps like Philips Hue that typically works well with frosted glass lamps. It's a work in progress as I would like to make a more stable mount for the lamp socket but as a test it works well. The filament…
Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…
Modern finned vase that has been bent from a circle to a more squareish shape. Prints perfectly well in vase mode.
A abstract lamp shade model that use Bambu Lamp Kit 001 Base/ Lamp w/Base: 190 mm height x 105 Width No supports required. The puck led used here: (The example used a 3W, 6000K, Cold White)…
Order from JLCPCB for the best price. Included technical drawing for thread tapping. Some options for bolts: PEV Dev Extended bolts: https://pevdispensary.com/products/extended-titanium-axle-bolts-for-gt-vesc ProBolt bolts (Not…
greeblessss
This is a replacement knob/dial for the Anycubic Kobra Go. This knob adds fins to it for more simple manipulation. Organic supports in Prusa Slicer come off super easy. Fitment was a bit tight and I had to use a bit of force to press it…
Modeled with an insertion diameter of 26.4mm. I printed 0.20mm layer silk PLA which ended up with a an actual diameter of about 26.05mm for a slightly loose fit matching the original nose cone. Depending on your fit, you might find XY…
tested by printing them, files are being machined but it takes time so have it machined at your own risk. ride on.
An elegant LED tea light votive with fins. Two models are available: one with a lid and one without. Both are around 6cm tall, 5.6cm wide, and have 30 evenly distributed fins. The OpenSCAD file is provided for customizing the candle…
I have only tested these with a quite low power springer airsoft. They fly quite straight and normally have longer range than normal BBs. These are also the projectile for a fully printable airsoft design i'm working on with my friend.
This is a finned cooling hub to allow aftermarket edger attachment on cheap garden edger. I wanted to change the line spool to something more reliable. This was made for the Portland 3.8 Amp 13 in. Electric String Trimmer in mind, But…
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
I love finned planters and enjoy designing them. While most of my finned planters are used commercially, I have decided to make one of my favourite finned planter prints available to the community. It is a simple design, but very…
Two finned tea candle holder designs. The holders flex wider to receive a tea candle and have a ledge to keep the candle and metal pan level with the top. The design is intended for single wall, no top layers, no infill, and 5 bottom…
The remix is a necessity, since my tealights are not the same size as the original model, it was a mistake not to measure before printing, but once checked it has been resized to be able to use a tealight with a diameter of 38mm and a…
A small ribbed planter with a rounded modern style for my baby succulents Not for vase mode
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 the planters in the image was stopped about 90-94mm as I didn't need them as tall…
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 Category: Decor
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 Category: Decor
Decorative Flower Vase. *Added a V2 version I think has a nicer shape. Your choice.
Really wasn't sure what to call this thing, but was learning some new techniques in Fusion 360 and this is the result. 2 versions included, one with the cavity modeled and one filled for use with vase mode. I have not actually printed it,…
A 3D-printed honey pot-shaped planter with elegantly swirled fins adorning its surface. The honey pot design adds a touch of charm, while the intricate swirls create a visually appealing and dynamic texture. This unique combination makes…
Some time ago I had designed a flexible vase and never posted it. I thought designing something similar would look good with dual color silk. So here they are. Four different versions. One 102mm and the rest 77mm. They all can be scaled.…
Axle block covers to match the shape of XR PubHubs. Optionally with matching fins! Cutting Instructions Send to your CNC shop of choice for a pair of these ??? Profit
This is my 2nd version as the first attempt was too tight and wouldn't fit onto the pen. I used Polymaker PLA+ Pro in black, sliced in Cura and printed with a SW2 I kept the model in it's default orientation so no supports would be needed…
