Search results: flott

Sort order

Counting matching models…

P
PrintablesJFuzz

Ikea Flottilj Shade

This is a quick lamp shade for the Ikea Flottilj led light . If the light is at all any higher than your eyeline you're basically asking to be blinded 😂. This helps reduce that impact. For me the light is about a foot above me angled down…

Downloads
42
Likes
4
Rating
0
P
PrintablesOleksii

TIMMERFLOTTE Holder

Simple holder to stick TIMMERFLOTTE sensor to flat surfaces. The top "screw" should be tight enough to be able to insert the sensor, but at the same to flex enough to catch or release the indentation on the bottom. Printed flat without…

Downloads
340
Likes
36
Rating
5
P
PrintablesThe Stock Pot

IKEA BILRESA & TIMMERFLOTTE Clipsal Wall Plate Mount

As featured in the video above! A Clipsal Classic / C2000 compatible wall plate for IKEA's BILRESA buttons & TIMMERFLOTTE sensor. Hardware Required & Assembly 2 x Countersunk M3x10mm machine screws Printing Instructions Material: PLA or…

Downloads
195
Likes
41
Rating
5
P
Printableslogopedian

IKEA Timmerflotte holder

Another holder for the IKEA Timmerflotte sensor, very good fit and great to be able to place it on a desk or table, no need to mount on the wall. Prints without any supports, standing on the side.

Downloads
155
Likes
13
Rating
5
P
PrintablesVolki

Ikea TIMMERFLOTTE Holder for use with command strips

Remixed from the original design by @oleksii_817342, Wall mount for an Ikea TIMMERFLOTTE Temperature sensor designed to be mounted with a trimmed down Command strip. I recommend printing with supports for the overhang caused by the cut…

Downloads
120
Likes
17
Rating
5
P
PrintablesSjalle

Desk Stand / Holder for IKEA TIMMERFLOTTE Sensor

A minimal and elegant desk stand designed specifically for the round IKEA TIMMERFLOTTE (Matter/Thread) smart temperature and humidity sensor. Out of the box, this sensor is primarily designed to be wall-mounted using the keyhole on the…

Downloads
111
Likes
5
Rating
5
P
PrintablesMatthias

Griff Passiersieb Flotte Lotte

Der Griff ist für eine Original “Flotte Lotte®” geeignet: Für eine möglichst gute Festigkeit habe ich den Griff mit mehreren Außenkonturen gedruckt.

Downloads
90
Likes
5
Rating
4.5
P
PrintablesLukaP

TIMMERFLOTTE SKÅDIS Hook

Simple hook for the IKEA TIMMERFLOTTE to hang on a SKADIS pegboard. Uses minimal material. Printed on the Elegoo Centauri Carbon using a random black PLA+.

Downloads
76
Likes
8
Rating
5
P
PrintablesMrGelz

Flottjet Abrichte Dickenhobel 88003 Zahnrad Vorschub / Thickness Planer Gear

A gear of my thickness broke a while ago. The sparepart costs more than 40 €, so i decided to remodel it. Works like a charm. Print settings: Print with something sturdy but not brittle (Tough PLA or Nylon) 100 % Infill Standard-Quality…

Downloads
76
Likes
7
Rating
0
P
PrintablesChristopoulos

Easter Bunny reusable Casting Mold TPU (Keraflott)

Inspired by the Easter Bunny Egg Holder from 3Design (https://makerworld.com/en/models/240661#profileId-256591), I have reverse-engineered a mold model and added an eye. Another version with dots. Molds I printed with TPU from Overture at…

Downloads
71
Likes
16
Rating
0
P
Printableslogopedian

IKEA Timmerflotte wall mount

I do have a lot of screws in the house but not all of them fit the backside of these type of holders and it is not easy to get the right screw at the right distance from the wall. This holder solve the issue, easy mounting with basically…

Downloads
66
Likes
7
Rating
5
P
PrintablesRenba

Senseo Swimmer Flotteur

Hy ! This is a swimmer replacement for my Senseo HD7870 water tank. PETG must be used for bio compatibility. (like water bottles) You have to stop your print at 20.8mm height in order to insert the magnet (6x6mm round) The link for a very…

Downloads
66
Likes
4
Rating
0
P
PrintablesAnachronist

IKEA Flottig lunch box clasp replacement

The IKEA Flottig lunch box remains popular among those who own one, in spite of the product being discontinued. Unfortunately, it is possible for the clasp to break, or get knocked off the lid and become lost. Without the clasp, the lunch…

Downloads
59
Likes
6
Rating
0
P
Printablesrydz

IKEA TIMMERFLOTTE Small holder - wall mount

I designed a compact holder, optimized for minimal dimensions while maintaining full stability. To mount the holder, I used 24 mm wide acrylic tape.

Downloads
55
Likes
3
Rating
0
P
PrintablesChris Payne

Diffuser shade for Ikea FLOTTILJ desk lamp

I was looking for a good lighting source for video conferencing in a home office. I had been using umbrella-type lighting for photography but they were space consuming and unsightly so keen for something more compact as well as…

Downloads
47
Likes
4
Rating
0
P
Printableslogopedian

IKEA Timmerflotte holder

Easy holder for your IKEA Timmerflotte sensor, prints without supports, I added a brim since I have a bit of a cold basement and it reduced the warping ot the PETG

Downloads
47
Likes
3
Rating
0
P
PrintablesDrDice

Anycubic Ace Pro Timmerflotte mount

IKEA Timmerflotte mount for the Anycubic Ace Pro

Downloads
41
Likes
6
Rating
5
P
PrintablesHeimwerkerdad

Flotte Lotte Akkuschrauber Adapter v2

2nd Version of the lotte adapter... making it more robust. Category: Kitchen & Dining

Downloads
36
Likes
4
Rating
0
P
PrintablesMrGelz

Führungsschiene Bandsäge Flottjet

Führungsschiene für Flottjet (491510) Bandsäge

Downloads
34
Likes
1
Rating
0
P
PrintablesL'agridu45

Flotteur pour thermomètre de piscine.

Imprimer sans support, le PLA ne pose pas de problème avec l'eau mais il peut y avoir des infiltration d'eau prévoyez donc d'épaissir les bords et de l'imprimer avec des couche fine.

Downloads
33
Likes
2
Rating
0
P
PrintablesMeister Edel

Düsiflott V6 Nozzle and Cleaner quick access & storage Case

Here is a little storage to place your nozzles in. And if your nozzle jams the tools to free it is easy accessable. If your acupuncture needle is shorter than 30mm you might want to reduce the diameter of the wholes. You can do that with…

Downloads
31
Likes
12
Rating
0
P
Printablesthe_mel

Jalapeno flottant - PexPeppers

that juste a pepper...

Downloads
25
Likes
2
Rating
0
P
PrintablesEike

IKEA Flottilj Lamp Shade Mount

A simple mount to replace the IKEA Flottilj stand with. The screw holes are designed for M3 counter-sink screws. This model is very easy to on its back without supports. I printed mine on my Prusa MK4 with PolyTerra PLA Marble White, at…

Downloads
25
Likes
3
Rating
0
P
Printablestgr

Adapter for Food Mill To Cordless Screwdriver (Akkuschrauberadapter für Flotte Lotte)

This is an adapter to attach a cordeless screwdriver to a food mill. You need a 14 mm hex nut adapter for your screw driver from your socket set/ratchet box. The inspiration came from this video:…

Downloads
25
Likes
4
Rating
0
P
PrintablesHelloWorld01

Flottilj (IKEA lamp) wall adapter

If you want IKEA's ‘Flottilj’ (don't ask me to pronounce it, to be read only) next your bed or somewhere that you can't put the original stand (or that you don't like it, which is my case😁) you can: Download the file Convert it to gcode…

Downloads
25
Likes
3
Rating
0

Stevenson Radiation Shield for IKEA TIMMERFLOTTE

Stevenson-screen style solar radiation shield for the IKEA TIMMERFLOTTE outdoor thermometer sensor (64mm x 18mm). Printable as one piece, no assembly needed. Features: - 5 angled louver plates (45 deg slope) for airflow + sun shading - 12…

Downloads
23
Likes
5
Rating
5
P
PrintablesAnHe

Table Insert for INCA Euro 260 Bandsaw (and Flott BS 260)

Table Insert for INCA Euro 260 Bandsaw (and Flott BS 260) standard insert / full table tilt possible extended version ( no table tilt ) works very well with my design of the dust extraction for the INCA Euro 260 Bandsaw included STEP…

Downloads
23
Likes
3
Rating
0
P
Printablesfrnktrgr

Flotte Lotte Food Mill Handle

Print instructions No supports. Default settings. Assembly Attach the handle to the crank and then insert two pieces of filament into the holes to secure the handle.

Downloads
22
Likes
1
Rating
0
P
Printablesvalodec

Ikea TIMMERFLOTTE Holder for use with Tesa Powerstrips

Ich habe diesen Remix erstellt, um die Aussparung für das Klebeband zu entfernen. In der ursprünglichen Version war diese zu tief für einen druckaktivierten Tesa Powerstrip, sodass das Band keinen optimalen Kontakt zur Wand hatte. Ohne…

Downloads
20
Likes
1
Rating
0
P
PrintablesDargo

Logo Star Trek - Emblema della Flotta Stellare

Perfetto per cosplay o da esporre sulla scrivania, questo logo ti farà sentire parte della Flotta Stellare!

Downloads
18
Likes
6
Rating
0
P
PrintablesEtno712

Flotteur pour disque de brumisation (Diamètre 16mm)

Le système de clipses permet de changer facilement le disque si nécessaire. Notes pour l'impression motif de remplissage : cubique adaptatif

Downloads
18
Likes
3
Rating
0
P
PrintablesAnHe

dust collection / dustport for INCA Euro 260 Bandsaw (and Flott BS 260)

dust collection / dustport for INCA Euro 260 Bandsaw (and Flott BS 260) This works best if you cover the front slot where the saw blade is inserted with painter's tape. works very well with my design of Table Insert for INCA Euro 260…

Downloads
16
Likes
2
Rating
0
P
PrintablesChrisTophe

ANNEAUX D'ALIMENTATION FLOTTANTS D'AQUARIUM

Anneaux d'alimentation flottants d'aquarium. Evite la dispersion de la nourriture à la surface de l'aquarium. Un support avec vis pour le glisser sur le verre, et ou, un support pour une ventouse. Mettre une mousse de polystyrène à…

Downloads
14
Likes
1
Rating
0
P
Printablesctheroux

TimmerFlotte Holder for Ikea Ivar Shelving

This is a holder to mount a TimmerFlotte sensor on an Ikea Ivar ladder. No screws are needed. Support material is not required. An infill of 20% is recommended. This object's main web page is:…

Downloads
10
Likes
1
Rating
0
P
Printablesru_roell

Timmerflotte X Mosslanda

A mount for the Timmerflotte sensor on the Mosslanda picture ledge.

Downloads
8
Likes
1
Rating
0
P
PrintablesEskichagar

Panier de skimmer flottant piscine Zodiac - Zodiac pool floating skimmer basket

Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…

Downloads
7
Likes
1
Rating
0
P
PrintablesMarcell B

Opengrid - Timmerflotte Snap Mount

A minimal hook designed specifically for the IKEA TIMMERFLOTTE sensor based on David 's official bare snap for openGrid. Snaps onto standard OpenGrid panels. The sensor hook is an intentionally snug fit, not loose — this keeps the…

Downloads
7
Likes
4
Rating
0
P
PrintablesThéo ROot

Abreuvoir à insectes pour fontaine flottante

Cet accessoire pour fontaine flottante permet aux insectes de pouvoir venir boire sans se noyer. Le modèle est conçu pour une fontaine de 16 cm de diamètre mais peut s'adapter sur makerworld. Inspiré de ce modèle…

Downloads
6
Likes
0
Rating
0
P
PrintablesJohn Archer 21

Ikea Flottilj

A quick design for a replacement plastic shim for an ikea lamp. Random seam advised. I printed with PLA just fine. Made with Fusion.

Downloads
5
Likes
0
Rating
0
P
PrintablesTwoBigPaws

Timmerflotte Snoo holder

A holder to use the Ikea Timerflotte climate sensor on the Snoo bassinet.

Downloads
4
Likes
1
Rating
0
P
PrintablesMédérick

Klarstein Max Breeze Smart 15000 : Rehausseur Flotteur

Modèle compatible : Klarstein Max Breeze Smart 15000 Utilité : Surélève le flotteur du réservoir d'eau afin d'avoir un débit d'eau suffisant pour refroidir le climatiseur. Requis : Nécessite d'utiliser le bloqueur de réservoir car le…

Downloads
3
Likes
0
Rating
0
P
Printables

TIMMERFLOTTE Holder

Simple holder to stick TIMMERFLOTTE sensor to flat surfaces. The top "screw" should be tight enough to be able to insert the sensor, but at the same to flex enough to catch or release the indentation on the bottom. Printed flat without…

P
Printables

Panier de skimmer flottant Zodiac - Zodiac floating skimmer basket

Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…