Desk Stand / Holder for IKEA TIMMERFLOTTE Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist desk stand for the IKEA TIMMERFLOTTE sensor. Perfect angle for reading on any table or shelf.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 115
- Makes
- 2
- Views
- 301
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A minimal and elegant desk stand designed specifically for the round IKEA TIMMERFLOTTE (Matter/Thread) smart temperature and humidity sensor.
Out of the box, this sensor is primarily designed to be wall-mounted using the keyhole on the back. This custom stand solves that problem, allowing you to place your sensor conveniently on any desk, shelf, or nightstand.
Key Features:
Perfect Fit: Uses the built-in keyhole on the back of the sensor. Simply slide the sensor onto the mounting peg for a secure, flush fit.
Optimal Viewing Angle: The stand is tilted slightly backward, making the beautiful dot-matrix display easy to read from a sitting or standing position.
Sturdy Design: Provides a solid base so the sensor won't tip over when you press the top button to wake up the display.
Minimalist Aesthetic: Designed to perfectly match the clean, Scandinavian look of the IKEA smart home ecosystem.
Print Settings Recommendations: This is a quick and easy print that uses very little filament.
Filament: PLA or PETG (PLA works perfectly for indoor use, as seen in the photos).
Layer Height: 0.16mm or 0.20mm for a smooth surface finish.
Infill: 15% is more than enough.
Print Orientation & Supports: You can print this in a few different orientations. If you print it upright on its base, you will need a small support under the mounting peg. Important: I highly recommend using Tree Supports (or Organic Supports) for this, as they are much easier to remove and leave a cleaner finish. Printing it with the circular backplate flat on the build plate might also require some supports under the angled base. Choose what works best for your printer!