Desk Stand / Holder for IKEA TIMMERFLOTTE Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist desk stand for the IKEA TIMMERFLOTTE sensor. Perfect angle for reading on any table or shelf.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 288
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A minimal and elegant desk stand designed specifically for the round IKEA TIMMERFLOTTE (Matter/Thread) smart temperature and humidity sensor.
Out of the box, this sensor is primarily designed to be wall-mounted using the keyhole on the back. This custom stand solves that problem, allowing you to place your sensor conveniently on any desk, shelf, or nightstand.
Key Features:
Perfect Fit: Uses the built-in keyhole on the back of the sensor. Simply slide the sensor onto the mounting peg for a secure, flush fit.
Optimal Viewing Angle: The stand is tilted slightly backward, making the beautiful dot-matrix display easy to read from a sitting or standing position.
Sturdy Design: Provides a solid base so the sensor won't tip over when you press the top button to wake up the display.
Minimalist Aesthetic: Designed to perfectly match the clean, Scandinavian look of the IKEA smart home ecosystem.
Print Settings Recommendations: This is a quick and easy print that uses very little filament.
Filament: PLA or PETG (PLA works perfectly for indoor use, as seen in the photos).
Layer Height: 0.16mm or 0.20mm for a smooth surface finish.
Infill: 15% is more than enough.
Print Orientation & Supports: You can print this in a few different orientations. If you print it upright on its base, you will need a small support under the mounting peg. Important: I highly recommend using Tree Supports (or Organic Supports) for this, as they are much easier to remove and leave a cleaner finish. Printing it with the circular backplate flat on the build plate might also require some supports under the angled base. Choose what works best for your printer!