Counting matching models…
All parts are printed without support, Z=0,30mm. For shooting mehanizm you need 10x standard everyday elastic rubbers. It is constructed that you can replace the elastic if it become weak. Print it with PLA or PETG. I suggest that you…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
With this practical cat food pouch squeezer , you can get the very last bit out of every cat food pouch — cleanly, easily, and without sticky fingers. Short on Youtube: Wet cat food pouches often leave a surprising amount of food behind.…
About Stealth Press ZERO Stealth Press ZERO: Compact Precision Heat Set Insert Tool. Stealth Press ZERO is a miniaturized version of the original Stealth Press , offering a highly precise, mostly 3D-printed DIY heat set insert tool…
Let me introduce you this Print in Place Airless Football - Airless American Football It is Original Size model. I have used generic TPU for ball Please, Use support blocker to block unnecessary supports, I have added other print settings…
Tired of wasting wet cat food left inside sachets? Cat Food Squeezer is a simple, practical, and fully 3D printable tool designed to help you extract 100% of the food from cat food pouches — quickly, cleanly, and without messy hands. A…
Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…
This is a parametric hanger for Ikea 365 food storage container lids - you can tweak how wide you want it, how many hooks, what size screw holes, and how many screws It was inspired by neuromorph's model linked below but remade from…
Join here to get access: https://www.patreon.com/kogi3d Print in Place Fully Articulated Skeleton Foot License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any…
A 3D model of an american football with the official measurements. I included two versions of the ball: The original one with all seams and the laces and one blank version to be able to create figures by substracting the ball from the…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Hello, I have a clothes peg for you, food. They work beautifully and only require very little material to make. Ideal for attaching laundry while drying. I used PLA/PETG Basic as the material No need to use supports If you are interested…
This is a 3d printable roller for your feet and muscles. There are many who believe the benefits of rolling out your feet and muscles, and this can work for both. I saw simple rollers online and decided that I could easily print one. It's…
Advantages : Better support for the foot extension. Foot extension will never fall off again. You will never lose the foot screw. 2 versions : with or without the bottom panel Recommended Print Settings : Nozzle : 0.4 Layer height : 0.2…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
These printable lids for steel food cans are designed to be printed with TPU to be flexible enough to snap on tightly to keep food fresher in opened steel cans. Update version 2: Added options for text on the lid and and pull tab with a…
I designed this automatic cat feeder, complete with reservoir extension. It's a self filling bowl without the need for electronics or intervention... It is however only suitable for cats that don't eat more than they need. You do need a…
I decided that instead of money, the winner of our Fantasy Football league should get a trophy. Naturally, I designed it after the Lombardi. However, since it's a Fantasy League Trophy, I figured I'd name it after the greatest Fantasy…
This Dual Sticker Organizer Box was designed to help organize and store up to 300 World Cup stickers in a simple and practical way. The model includes a box with two compartments and a stand , keeping sticker stacks organized and easy to…
Anti-Vibration Foot / Shock Absorbing Pad – 3D Printable This anti-vibration foot is designed to reduce noise and vibration from machines and devices. Its stepped, layered geometry helps absorb movement and minimize transmitted vibration…
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
Here is a American Football helmet I created from a 3D scan I found of a Riddell helmet. Scale to your needs. I wanted to use it split in half to easily hang on the wall. The face mask was extremely difficult to print. I ended up needing…
Made this remix for a friend who wanted a small resin printed helmet.
I couldn't find a Football Stand matching my preferences. So I designed my own ;-) Matches the original football size (HxLxW 7x12x7 inches / 17.78x30.48x17.78 cm). But even works with smaller sizes. The stand can also be used in asymetric…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…
This piece joins the Meyui ONAMI Collection , carrying forward the series’ iconic wave-inspired frame. Elevated to 13 cm , it helps your cat or small dog eat in a natural, ergonomic posture while keeping the dining area tidy. Adjustable…
Three different templates for footprints, bootprints and elf shoeprints for the Christmas elf (elf on the shelf). The stencils are set higher on the tracks so that they can be placed over the tracks already created without smudging them.…
The makita charger doesn't come with any keyholes on the back to be able to mount it to the wall. This little print solves the problem by replacing the stock feet with ones having a screw hole protruding the base of the charger. I…
Turning the knob makes the content of bottle came out in controlled portions. Possible uses: Sugar, Coffee, Tea, Condiments, Powders, etc. … Important Printing Settings and others Print at 0.2mm, no support needed but uncheck PrusaSlicer…
Soccer Ball / Football Keychain This football keychain was designed by my brother and it was used as a kind of demonstration object. In the .stl files there is a version with hole & one without. Have fun & cheers Print Settings Printer…
This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…
I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…
English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…
Versions April 2nd 2026: v2.12 improved geometry on the outside of the foot (less buckling) better print orientation and support placement Opening the Project I'd recommend downloading the .3MF project file and opening it in PrusaSlicer.…
Couldn't find a soccer shoe keychain so I decided to create it myself. I used an already existing shoe model and added the ring. Use tree supports touching the bed. Category: Accessories
It holds around 200 g of dog food, atleast with the kind my dog is eating. Updated the design so that the handle needs less support. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.35 Infill:…
Storing cans for first-in-first-out (fifo) usage. Put cans in the top, and they roll down to the bottom. Some other notable features: The wedge cutout for the upper level lets these print without supports. Sloped track rolls cans to the…
Cat food pouches can be frustratingly hard to empty. This cute squeezer is here to save the day and do so in style! Made for: Felix brand pouches Slot dimensions: 95 mm x 2.2 mm Print time: ~1 hour Printer used: Creality Ender 3 v2…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
A great low poly shell measuring 200mm x 125mm. A large model with enough space for plenty of snacks or something similar. The shell can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon…
Thanks again to DrMckay for providing this awesome rendition of Rogue Ones Shore Trooper. I have stripped the components back and split them up to the best of my ability and it could do with some serious smoothing. Something I have yet to…
I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…
Print with 0,4 mm nozzle, 0,2 mm layer height and 5% infill. Filaments used for the containers in the pictures: colorFabb (colorfabb.com) RAL 8012 “Red Brown” RAL 7040 “Window Grey” RAL 6037 “Pure Green” PrimaValue (primacreator.com)…
I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…
Can be added directly to an existing keyring or get some keychains here:…
size chart: --- Filament: Recreus 82A, 3Dfils 85A Use TPU 95A first --- Orca Slicer / Bambu Studio settings: Global - layer height: 0.2mm - line width sparse infill: 0.6mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 -…
You need to rotate your food cans (use the old ones first). This dispenser lest you always grab the oldest one first and top your stock up from the front. It does not need to be a prepper thing, because in general you are better off if…
Star Trek Enterprise D 4 foot studio replica scale model, hollowed out for room for an internal structure, lighting effects. Interior framework still needs a bit of work.
Print in PETG to be easily washable. v2 update: thickened the handles so it's more rigid when printing.
I have been looking for a Bigfoot statue scan for so long which looks good, and matches the bigfoot statue at my local J&J's. @itsprestonm 's scan was the best I have found so far, but was a bit rough and unedited. I fixed it up a little…
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Silencing foot I designed for my Mk3S+ using the softest squash balls (double yellow dots) I was looking for something better than the original rubber pads supplied together with the printer and found the idea using soft squash balls…
Simple card display stand for any flat surface (Shelves, Desk, Dresser, etc)
A new background using an improved panel system (4 foot x 2 foot size made of 8 x 8 inch panels with alignment biscuits) can be found here: https://www.thingiverse.com/thing:3564970 A "proof of concept" double sided aquarium background…
Model of 180mm diameter ball, can be scaled in slicer. Files include: 1 Full ball 1 Hollow ball with 5mm wall thickness
After having designed the football trophy, my boys called for a separate ball. Why not in 2 colors. What can you do when you have only single extruder printer? Split :) Happy printing, sand where necessary.
Je remercie le créateur pour son modèle original et je l'ai amélioré pour qu'il corresponde parfaitement à ma PS5 pro. J'ai optimisé l'évacuation des aérations de la console pour évité toute surchauffe et créer un compartiment pour mettre…
This model is aimed to make a person's life more comfortable which can range from severely reducing foot pain to quenching a small itch on the foot with a much needed scratch. The foot is a difficult place to reach with our own hands and…
The Football Fidget Toy / Spinner Cute little football ready to use for the “Football European championship” beginning today in Germany. It's a print in place part. The ball has Ø40mm. With a bit of oil it can spin really fast and long.…
These are digital 3D printable models of Miniature Food from across the globe from our magic compass . This pack is part of our All-knowing Magic Compass which you can find on our website:…
size chart: --- Filament: Recreus 82A, 3Dfils 85A Use TPU 95A first Nozzle: preferably 0.6mm, especially with softer filaments --- Use the Orca Slicer or BambuStudio 3mf You migh also download the “gcodes.zip” folder and print the…
This Print in place Pet Puzzle will challenge your pets Logic! See it in action here: https://youtu.be/BKDsoeaHUXw Use 0.2mm Layer height, and 0.4mm nozzle. Every Like and Rating is appreciated! Please leave your questions and comments in…
Some 3D Printed feet for your PC case rising needs. insert 1/2" 6-32 inch screws thru the heel of the "foot" to secure the feet to your pc. on a more serious note, check out some of my other mods that help with getting your gpu cables out…
If you do not know what it is used for, then you probably don't need it :).
UPDATE I added a custom printable bearing. It has a 0.2mm tolerance so your printer needs to manage that in order to use it. The inside is serrated to better grip the roller. Outer tolerance is pretty much zero so it will be tight to…
The interior of the foot is empty to house an amount of soil capable of containing roots. --------------- El interior en el pie está vacio para alojar una cantidad de tierra capaz de contener raices.
This is my version of a wall mounted holder for sports balls. Pictured with a size 5 soccer ball but it will fit most balls up to and including a full size basketball. (Update: I've added a second version that has a simpler mounting…
I wanted to print some small Bigfoot statues to give as gifts to friends. This is a quick unedited scan of a Sasquatch statue.
Usage This support foot can take some of the weigh that may be overstressing you book shelfs or other kind of furniture. It can of course also be used as a spacer for all kind of other parts. The original design was made to range from 25…
Why calibrate Elephant foot compensation at all? Well, I have to admit that I used “standard” values for EF compensation for years. But I stumbled over this matter when designing my printed pinhole lens where I use the EF compensation…
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Horizontal foot for PS4 FAT: click here Horizontal foot for PS4 PRO: click here !! If you want tight hold, you can scale it down. Scale percentage…
I keep seeing the airless basketball and am not really a basketball fan. Now football is a sport I can get into. I give you the airless football. I added an updated version because I seen a few people say that the ends were printing open.…
ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%
Model is designed similarly to other flexi models and does not require any support. Works great when using the ironing setting to produce a smooth top surface. If you like my models and want to contribute. Tips are always appreciated!…
I designed my own Foot Massager Rollers for anyone that suffers with Plantar Fasciitis or just has sore feet. Designed in Nomad Sculpt on my iPad and you can design your own as well! Prints without supports I printed in PLA with 15-20%…
The original model from itsprestonm is pretty impressive, but it was throwing manifold errors on slicing and resolution was a bit low for me. I cleaned up the manifold problems, increase subdivisions and tried to add more details where I…
I needed a unique trophy for a fantasy football league that would easily allow adding logos and text. I am a novice so something that didn't require hours of youtube videos to figure out how to edit existing trophies was important. This…
Sometimes part of your body other than just your hands need to fidget (or be massaged). These two simple and functional designs hopefully help stimulate your feet and mind during those longer work days. Provided in 3MF and Fusion360 files…
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…
This dispenser stores up to 8 food cans with a diameter of 75mm and a height of 110mm. I have split the parts so it can be printed on an 220x220mm bed and then glued together but the whole part is also avaliable so you can do it yourself.…
Introducing the Most Useful Car Accessory on Earth - The Fast-Food Car Tray! This tray slides right into any car cupholder, providing a soda-sized cupholder, both a circular and rectangular sized sauce holder, a place to put your French…
Print specifications: I printed with 0.08mm layer height but I think it will be alright with higher layer height also If the grass is not fitting, try increasing width and depth by 0.25mm, but it should fit firmly as it is
Description Cute but practical dog food scoops to measure out an expected amount of food/kibble. Available in 3 sizes. Although visually similar to the earlier version (minus the handle changes), this version is completely redesigned from…
My printer surface was not completely level and was causing my K1 to wobble more during a print. After they were installed I adjusted the height of each foot so the printer sat solidly on the workbench. I then recalibrated the input…
I've created this reusable template for the Square Foot Gardening Technique. This allows you to easily space and plant seeds appropriately based upon the place size (ex. 9 spinach plants, 16 carrots, or 1 pepper plant… per sf). The full…
A soccer* ball to do soccer* poses for all you soccer* fans *AKA football
Fantasy Football Trophy - inspired by old sowjet monuments. Super easy to print Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Craftbot PLA WHITE Post-Printing ============= Shiny Finish…
Make your wife happy and get a little justification for your 3D printing hobby. Storage boxes for food storage bags: Snack, Sandwich, Quart and Gallon sizes. The three smaller sizes are one piece prints. The gallon size needs to be done…
Automatic cat Feeder I added a lid after some users asked for it, you can find more lids from other users in the comments as well as in the remixes. Use at your own risk
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…
This is an over-engineered footrest for the very economical ikea antilop highchair. The collar parts compress the printed fingers against the legs to the footrest securely. Infinitely adjustable, the central joiner part allows the…
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
Overview: Upgrade your eurobox with printable hardware. This set includes hinges, snap locking mechanism, feet and handle to enhance usability. There are euroboxes with lid and handle on the market but there are usually more dificult to…
This is a kickoff kicking tee for American football. No support is needed!
It can be made in a single or double configuration, prints without supports and is easy to put together.
A modern football helmet reimagined as a clean, single-color 3D printable model. Designed with bold raised center striping, the signature three-stripe pattern is extruded directly from the shell to create strong depth, shadow, and tactile…
![Foot Fidget Rollers : Play with (or massage) your feet! [Customizable Fusion360]](https://media.printables.com/media/prints/646276/images/5101353_c7c7f714-fb93-4f27-82ad-4993c4745155_5cbe03c3-1288-491b-b1f7-347b35ec26c8/footrollers-v2.png)
