Counting matching models…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Kit out your Forerunner and become a... Fivesprinter? Anything you want to…
Hi everyone! Here's my charging dock for the Garmin Forerunner 255. You just need some rigid filament (e.g. PLA or PETG) and the TPU feet are optional. The version I printed was a bit older (I updated an overhang for better printability)…
Made the grip romovable to be able to print on a1 mini, also gives option for new color combinations. Gets secured by 4
Simply print and enjoy! The adapter is a snug fit in the driver's side cupholder. Designed for a 1 L mason jar but it should fit waterbottles (up to 3.9 inches or 100 mm in diameter). To make a passenger side adapter, just mirror the part…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
Remix of https://www.printables.com/model/764441-garmin-strap-retainer-clip Adjusted dimensions for bigger strap
simple mount to use a forerunner 55 running watch (or other model with about the same size) as a bike computer.
Needed a replacement lower strap for my Garmin Forerunner 935
replacement strap loop/buckle for a Garmin forerunner 945 for when they snap. bestmi printed in TPU, no support needed.
Free loop for GARMIN FORERUNNER 235 watch strap inside size is 23mm by 6.5mm Printed on Creality K1 MAX Used filament from Fil X -- TPR90 Black Nozzle 220 Bed 60 on Creality Smooth PEI plate with hairspray and still was just sticking to…
Print settings: brim layer height: 0.1
For this charger - https://www.aliexpress.com/item/1005005247599994.html?spm=a2g0o.order_list.order_list_main.5.fafe1802j8EUSz Flip the Forerunner mount orientation if required
The silicone bands that come with these watchbands constantly break so I decided to design my own. You can scale it to like 99% if you desire a tighter fit. Printed in TPU 0.2mm layers, turned out pretty good.
Stand for forerunner 245 watch fits charger looks cool you get the gist
Designed with a 6° angle so that the watch sits roughly parallel with the pegboard. After printing, you will need to sand down one side of the hook so that it fits. Remix of Garmin Forerunner 230 Command Strip Charge Mount With HRM Clip…
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
It has a gap in the wrist facing side so you can squeeze the band into it and avoid dismantling your watchband to install. It also has a pin to lock it in place on the other end of the bend. Prints without supports.
Replacement watch band loop for the Garmin Forerunner 245. Tested and feels most comfortable printed in TPU. Print with supports. Print with supports.
Print in flex with supports. Trim the excess.
Simple band clip replacement for Garmin Forerunner 945. Comfortable design. Raft recommended. TPU recommended or it will be very hard to adjust. Supports on the tooth recommended.
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Kit out your Forerunner and become a... Fivesprinter? Anything you want to…
Hi everyone! Here's my charging dock for the Garmin Forerunner 255. You just need some rigid filament (e.g. PLA or PETG) and the TPU feet are optional. The version I printed was a bit older (I updated an overhang for better printability)…
I created this mount to fit the Quickfit bracelet mounts, so a very secure mounting of the sportswatch to the bike is possible. Metal Quickfit mounts can be bought for cheap on largest chinese online seller. The mounting brackets can be…
Made the grip romovable to be able to print on a1 mini, also gives option for new color combinations. Gets secured by 4
This project is a custom-designed charging stand for the Garmin Forerunner 955, created with precision, usability, and aesthetics in mind. The stand is perfectly fitted to the shape of the watch, ensuring a secure and satisfying placement…
Simply print and enjoy! The adapter is a snug fit in the driver's side cupholder. Designed for a 1 L mason jar but it should fit waterbottles (up to 3.9 inches or 100 mm in diameter). To make a passenger side adapter, just mirror the part…
A friend of mine has a problem that the metallic connectors on the charging port gives her rashes. She is very sensitive to earrings and jewelries as well. To allow her to wear her watch all day i created a small cap to cover the charging…
This is a "strap keeper" replacement. I copied measurements from the one I broke after a year. Consider this abandoned because it turns out the entire strap is compromised (after I had already designed & printed this part). In the future…
Replacement for Forerunner 235 strap ring. Works better than original, as it's tighter with smaller bow curve. Print settings: filament: TPU 20D/40D Shore line width: 0.42 mm layer height: 0.2 mm print speed: < 20 mm/s Check out my other…
I broke the watch strap clip on an aftermarket silicone band on my Garmin and it was annoying sliding the thing under the inside of my wrist so I printed a replacement one based upon the geometry of the band itself (not the old clip).…
The old watch dock connector had a broken contact pin, so i made a new dock. I used 1mm wide pogo pins which i soldered to an old USB cable. The back plate can be fixed by glue or a small screw. I printed it in ABS and this might be…
You have to adjust the width to your wrist diameter. That's why I also uploaded the .step files
Is your bracelet loop broken? No problem! Here is a replacement. TPU 95 A is a good choice of material.
Forerunner 945: width 22mm axis 47mm Fenix 6x: width 26mm axis 51mm Category: Sport & Outdoors
Quickly made this to replace the broken strap on my watch, printed using flexible filament. Update 22/9/18 I have added the other parts of the strap but these have not been test printed. Print instructions Category: Sport & Outdoors…
Speedloader remix + Forerunner specific speed loader holders for use with Forerunners with picatinny rails Speedloader remix: longer pusher to maximize space, uses two spare nerf shell screws or 4-40 3/8" screws for assembly instead of…
This now fits with the Forerunner 55 Category: 3D Printing
My watch strap hold broke. Rather than using an elastic band, like I had for 2 years, I printed this. Probably less comfortable than the silicon original part, but also cheaper than buying a new strap holder. Plus, it can add a pop of…
Garmin Quarter turn adapter for the Garmin Forerunner 235 so it can be used with Garmin bike mounts. Simply remove the strap and fit this on place. Its divided in 2 for simple printing but can easily but combined and printed uniquely with…
When the attachment tabs for the wristband of the Garmin Forerunner 35 sports watch are broken, even the conventional replacement wristbands from Garmin or third-party manufacturers cannot be attached anymore. However, a sports watch…
When the attachment tabs for the wristband of the Garmin Forerunner 35 sports watch are broken, even the conventional replacement wristbands from Garmin or third-party manufacturers cannot be attached anymore. However, a sports watch…
Garmin Forerunner 101 GPS Battery Cover Supports: Not required. Use only if needed. Resolution: .20mm Infill: 40-60%
Replacement for broken Garmin Forerunner strap ring (as shown in the picture). Meant to be printed in TPU
Its a stand/charging dock for Garmin Forerunner 255 :) If u find some error please comment!
Extra long replacement watchstrap (strap only - no buckle). Useful if the original strap is too short or if you need a longer strap for winter running so you can wear your watch outside your gloves/mittens/coat. Available in 22mm for…
Strap for Garmin Forerunner 15 sports watch. Replaces silicone parts, you will need to reuse the original buckle and spring bars. Print Settings Build plate adhesion: Brim recommended for locking band, the rest doesn't need it. Supports:…
Bezpečnostní očko (pojistka) řemínku / pásku hodinek o šíři 22 mm. Určeno / testováno pro řemínek hodinek Garmin Forerunner 935. Print Settings Rafts: No Supports: No Resolution: 0.15 or 0.2 Infill: 25 - 100 % Filament: FilaFlexible40…
Supporto per avere su manubrio della MTB o Bici da corsa il Garmin Forerunner o altro modello. E' progettato per un manubrio con diametro da 21 mm.
I really liked john0945's Garmin Forerunner 35 Watch Band Holder, but I found that the dimensions were a little bit loose, so my strap would constantly fall out. I created this remix with tightened up dimensions, and also made the Fusion…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
