Counting matching models…
So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
Print approx. €9.96–€12.17 excl. taxPreliminary estimate for PETGSource material: PET
Print with supports sideways, PLA was tested and works nicely in Cali.
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
California, USA (CA) Topographic Relief Map with Rivers and Coastal Waters California, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
A silhouette of a california van for decoration
20% infill was more than enough; 10% is probably enough. I made the model to be carved with a CNC mill out of wood, and printed it out as a prototype.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Hi Brent yes I do have most, if not all the fortnite Weapons. I assume this is the one with the upgrades you were referring too? Now I havent had a chance to merge/ remove the over lapped pieces so do let me know if where on the right…
Sink strainer for VW California T5/T6 This is a remix of the Kitchen sink basket strainer from LoboCNC. I've reconstruct it from scratch to fit to the VW California T5/T6 kitchen. Followed these print instructions: The trick to printing…
Tube for filling Volkswagen T5 water reservoir. Flat side for easy storage and printing. It might fit other models but not yet tested. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
I wanted to have paper towel holder that slides in the slot on the side of the bed. Easy to insert, no tools required. You will need two side pieces( printed mine without top/bottom layer and kept just the hex infill) and two pieces for…
VW T5 / T6 California - Kitchen Hook 7.7.2018 - added 15mm width Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Category: Automotive
VW T5/T6 California - DualHaken Handgriff Fahrer Beifahrer Print Settings Printer: Multec Multirap M420 2Move Rafts: Yes Supports: No Resolution: 0.2mm Infill: 20% Filament: Multec PLA-HT Post-Printing ============= Um Kratzer am…
Since I use my California also as my daily driver, the fridge cannot stay open by it's gasspring. Not only will I get a heartattack when the lid slams shut (which will eventually happend during a trip). But it also puts to much stress on…
hook for gear mounted on the headrest
hook for gear mounted inside the sleeping roof of the VW california
For use in the VW T5 / T6 California - foldable cup holder (kitchen piping rail). Assemble with M3 screws. Print Settings Printer: Multec Multirap M420 2Move Rafts: No Resolution: 0.2mm Infill: 15% Filament: Multec PLA-HT blue Category:…
🛠 Stauraumerweiterung für VW Grand California 600 – Honeycomb-Design Diese passgenaue 3D-gedruckte Stauraumerweiterung wurde speziell für die Betttaschen im VW Grand California 600 entwickelt. An der Seitenwand nahe der Hecktüren befinden…
On the bottom of the fridge in the California Coast/Ocean there sometimes forms ice that will make your grocerys stick to the floor and or disassemble. This is one solution for this first world problem. Just print two of these (one…
Prints without support. Use something relatively temperature resistant for anything in cars.
Einlegebodenhalter für VW T5 California (runde Noppe an der Rückseite) / Shelf Holder for VW T5 California (round nub at the backside) Suche nach/ Search for “Einlegebodenhalter VW T5 California” in OnShape.
Der Schrankkorpus muss mit ABS gedruckt werden. Für die Front wird 3mm dickes Acrylglas benötigt. Jedes Frontelement wird mit 3 verdeckt angebrachten Scharnieren am Korpus befestigt und durch jeweils 2 Magnete verriegelt. Die 3 einzelnen…
Hook for the C-rail of the campervan
We're owners of a VW California T6. When you store tetra paks (orange juice, milk, other) at the bottom of the fridge, they have the tendency of getting wet and soggy due to water condensate. We saw commercial solutions which cost a small…
Remix of 3005083 (see above)- Added fixation behind aluminium cover Better fixation of the hook while the top roof is open Print Settings Printer: Mutirap 420 2 Move Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Multec…
This is a HOn30 slightly shortened Kennebec Central Forney #1 made to fit a Toma Model Works Kiso loco chassis. The real locomotive was converted to burn coal with an extended smokebox. To print tip the body up at 23 degrees. After…
smal hook for the smal piping rail inside the awning. Fits a lamp or other stuff
VW T5/T6 California - table hook - fits the integrated camping table Resolution: 0.2mm Category: Automotive
Sleeping roof shelf for both sides of the sleeping roof in a California T6.1. Fits into the roller shutter channel. Can be taken in/out easily or even left in place - the roller shutter will not close 100% but it is still ok to keep the…
Update August 2, 2025: Model tested & finished! Here's my biggest (Published) model yet! Coming in at 43 parts, and over a foot long, this is one hefty train ready to haul! This is R1 compatible! Surprise, I know. There's a lot of rear…
Blank License Plate template for you projects 2mm thick. Add your own text on top for color change prints.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Fornite Commando Sculpt Category: Games
VW T5/T6 California - roof storage compartment hook Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution: 0.2.mm Infill: 40% Filament: Multec PLA HT PLA HT Category: Automotive
This thing makes it possible to fix a tarp (or another element such as a solar shower) on a Volkwagen California. Print instructions The hook and the plate are printed using a strong filament (PETG with Carbon) with 100% infill The sole…
Clip-In-Stabilisator für Badregalfach - VW Grand California 600 Funktion: Das 3D-gedruckte Clip-In-Modul dient als rutschhemmender Einsatz für das Badregalfach des VW Grand California. Es wird direkt an die horizontalen Stangen des…
VW T5/T6 California - cupboard hook (single) Inspired by VW California hooks (rail + gap)" by rasniel Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 40% Filament: Multec PLA…
Here is a simplified model of the river raft from the Disneyland California Adventure ride “Grizzly River Run.” This model can be used for any generic river rapids ride but was inspired by the Grizzly River Run specifically. The model…
Please follow the instruction on the original model. One part “Sole” to be printed in TPU. Enjoy
https://www.printables.com/de/model/688769-hook-for-vw-california-interior
Alternative when the towels are wet.😎 Alternative wenn mal die Handtücher nass sind.😎
Piping Rail Hook for VW California / Multivan 12.3.2018 - added double hook Print Settings Printer: Multirap 420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 25 Notes: support for double hook Category: Automotive
License plate stamped from Starboy, The Weeknd's song with Daft Punk. Placa de matrícula estampada de Starboy, la canción de The Weeknd con Daft Punk.
Starting with a simple frame for the license plate. You can easily personalize it by adding text. I'll be testing for fit in the next couple of days and will add more designs as I have time. If you want sizes for other states or countries…
VW T5 / T6 California - Toilet Paper Holder Print Settings Printer: Multec Multirap 420 2Move Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Category: Automotive
In order to heat above, I designed this adapter. You need to buy one flexible aluminium pipe to connect the two element(something around 9-10cm diameter, I'm not exactly sure anymore. Then you can connect one side to the vent: And the…
Clip-In-Handtuchhaken für Badregalfach - VW Grand California Designmerkmale: Passgenaue Clip-Geometrie: Die Halterung ist speziell auf den Durchmesser und Abstand der originalen Regalstangen im Badbereich des Grand California abgestimmt.…
I used carbon rods an pipes
Not a lot of changes from the original file, but just modified the parameters and generated the needed files for someone to print the model without installing Fusion 360. I was able to print in PLA without issues for this, but I think…
made in fusion 360 update: --as requested i've rounded the edges al little more to 6mm--
Einfache Markisen Sicherung die sich bei unseren VW California bestens bewährt hat. Einfach 2 Platten entgegengesetzt auf den Markisen Fuss setzen und mit 2 Erdnägeln verankern. (Foto)
🛠 Sicherungsclip für Badregal im Grand California Dieser praktische Sicherungsclip wurde speziell entwickelt, um das Badregal im Wohnmobil zuverlässig gegen Herausfallen zu sichern – selbst bei starken Bodenwellen oder unruhiger Fahrt.…
Misc. hooks for the kitchen table rail or the cabinet door gaps. I have made two versions of the hook for the door gaps. The thin version fit smaller gaps. I can also recommend the headrest mounted hook I have created:…
Small shelf for VW T6.1 California was inspired by the great hooks I already have in use. Printed with PETG, activate the alignment supports. Kleine Ablage für VW T6.1 California wurde inspierert von den Tollen Haken die ich schon in…
Adapted dimensions
Emsa 2x cup holder California T6.1 with vw logo
VW T5/T6 California - cupboard hook (dual) Inspired by VW California hooks (rail + gap)" by rasniel --> dual hook (inside & outside) Link to Single hook Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution:…
Fortnite keychain for lovers of this game. Express your style with the magic of 3D printing with these Fortnite logo keychains. This keychain is designed by us with barbie silhouette. HowToPrint: Recommended layer height: 0,2mm Support:…
The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…
Adaptor for my Trashbagholder https://www.printables.com/de/model/841043-trashbagholder-campervan
Logos for Miller Electric, Lincoln Electric, Hobart Welders and Forney Industries. Let me know if you're looking for a particular logo and I'll do my best to track it down for you.
https://www.printables.com/de/model/688769-hook-for-vw-california-interior
This is a modified version of the endcaps for the paper towel support.
Replacements for kitchen sliding door handles / cupport latches for VW California Ocean. Tested and installed in the kitchen of our T6.1 Ocean. Corresponding VW article numbers according to the imprints on the original parts are 704360…
The Hotel del Coronado is a historic beachfront hotel in Coronado, CA near San Diego, CA. My wife and I were married at this hotel years ago so I wanted to design and print a model for our home. I chose to use matte PLA filament and used…
I was having some small ambiance light in the Cali. At first I just used some ducktape, which was working but it was a pain to close the upper cabinet as the lamp were getting stuck into it. So I made some extensions that allows have some…
Hi Sara, I think this model came out realy well and is certainly a doable print. But as you want this for cosplay, me personally, I would track down a second hand motorbike helmet and goggles and perhaps just print the spikes to then glue…
another fixing point for gear an the VW California C-Rail
this is a modified version of the endcaps for the paper towel support.
Another one of the many cool characters my son loves from Fortnite ; ) Cheers Jace
Here is my take on the Grizzly Mountain Peak from Disneyland California Adventure in the form of a bust. It was an interesting challenge to try and get the correct shape of the bear without copying the original mountain one-for-one (Gotta…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
New version: Split into two parts for printing without support Parts can be glued together with some drops of superglue Holding arms are a little longer for better/stronger fit Cup holder for Emsa 515616 Classic Grande for T6.1 California…
Manopola stampata in PLA con risoluzione consigliata di 0,15 per rendere liscia la superfice laterale, non necessita di supporto.
🛡 Mückengitter für die Notentlüftung im VW Grand California 600 Dieses praktische Mückengitter wurde speziell für die Notentlüftung über der Küchenzeile im VW Grand California 600 entwickelt – ideal für warme Sommernächte, in denen…
Clip / Holder for amateur, Ham, CB radio Microphone. For use in the VW T5 / T6 California - Kitchen piping rail. Remix of https://www.thingiverse.com/thing:2942514 and https://www.thingiverse.com/thing:2511088 Category: Gadgets
Shelf holder for the T6 version of VW California with an oval peg. Print with PETG or PCTG. ABS/ASA would probably work as well, but because it has really thin layers I'd advise PETG because it has better layer adhesion. I used tree…
Kleiner Mülleimer, speziell entworfen für die Lücke zwischen dem Fahrersitz und der Küchenzeile. Gewicht: ca. 620 g Höhe: 190 mm Breite: 178 mm Tiefe: 242 mm (oben) - 175 mm (unten)
Required hardware 1 M5 hexhead bolt with a washer and nut per each rod 1 aluminium rod fi 20mm (optional) hammer Cut the 1m rod into 3 even pieces. Put the bolt through the printed part, secure with washer and nut then insert into one end…
Edge rim only for card board spools. This is a quick remix to fit for the California Filament PETG cardboard spools. There are three versions included that work equally well. The 4.4 mm is a tight fit, matching the cardboard spool…
I made this to mount a drawer slide in the back of my VW T4 California but it can be used in any other position as well.
NOTE This is just a re-upload of https://www.printables.com/model/31723-vw-california-t5t6-tarp-rails-hook by @Antoine_21086 , fixing the STLs. Original Description This thing makes it possible to fix a tarp (or another element such as a…
Die Gurte der Sicherung für das manuelle Aufstelldach blockieren gerne das Schieberollo. Mit diesem Halter und einem 10x10x5mm Neodym Magneten, sowie 2 Streifen doppelseitigem Klebeband können die Sicherungen schon aufgeräumt werden und…
Multiple different Hotel California FOB Keyrings
https://www.oryxsolutions.de/fahrzeugtechnik/zubehoer-vw-bus-t5-t6/anbauteile-aussen/3601/kederstein-fuer-vw-bus-california-c-schiene-seitlich
A standard owen knob for spare part
Placa pequeña de las letras del juego Fornite para decorar el ambiente de juego.
The California Air Tools 1P1060S compressor is well reviewed as being quiet compared to the competition however due to vibration, if you're using this inside, it's still very loud. I found if I held the compressor in the air while it was…
A mosquito net for the VW California that is mush easier to both store and mount than the original one supplied with the camper. Easily fits e.g. up against one of the sides in the drawer under the bench. No need to be flat on the bottom…
🛠 3D-gedruckter Ablagenrahmen für VW Grand California 600 – optimale Raumnutzung über der Küchenzeile Dieses dreiteilige, passgenaue 3D-Druck-Bauteil wurde speziell für das Ablagefach oberhalb der Küchenzeile im VW Grand California 600…
Here is my take on the Grizzly Mountain Peak from Disneyland California Adventure in the form of a bust. It was an interesting challenge to try and get the correct shape of the bear without copying the original mountain one-for-one (Gotta…
California Licence Plate 1:2 and Outta Time Licence Plate Not for use on vehicles
VW California piping rail eyelet Print Settings Printer: Multirap 420 2Move Supports: No Resolution: 0.2 Infill: 25% Category: Automotive
This model is splitted in two parts. You'll need 4x M3x10mm countersink screw to assemble it to the GX Touch 50.
California Filament THE BEST PETG filament I have used for the Prusa printers in the states . https://californiafilament.com/ this is an insert for their new cardboard Spool holders and it works like a charm . If you want to try their…
