Counting matching models…
The Fraks Flexarm is a tool-balancing arm designed to keep the attached tool parallel throughout its movement. It was created to hold soldering irons to install heat set inserts into 3D printed parts. It has a large working area for its…
After making the Fraks Flexarm i was looking for a place to make it usable for me. I didn’t want to bolt it down on my desk but had a perfectly usable wall. Print without support, the Fraks can be placed in it the same way as you do with…
Here is a mount for refractometer. The bracket fits most brands such as Krüss, Eclips, ATC, PCE... seems to be standardized. There are two versions, one for gluing and one for screwing. Deutsch: Hier sind zwei Versionen, eine zum kleben…
Put the cake pieces into the base, follow the arrows clockwise and read the result in the base. Disclaimer: This model is shared without any guarantees. Check if it fits your needs before using it. No responsibility is taken for any…
I recently purchased a hardware kit from KB3D.com for building the FRAKS Flexarm Heatset Insert Press. In addition to the hardware, several 3D printed parts are needed to complete the build. The designer of this elegant kit,…
Simple snap-in mount for HS-02A. Might need a little bit of scaling +/- a few % depending on your printer. I'll make a more permanently retained variant if this winds up being problematic / I have more time.
A simple and small stand to put your 4" refractor onto a shelf. Just print the stand 2x and connect them with a 6mm rod (I had some 6mm linear rails lying around, I suppose wood will also work). In the attached picture I printed one of…
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
This is to attach a soldering iron to a $7.99 microphone arm . I bought the $11 80W iron with a power switch that was easy to turn on and off. The heatset tips were $6 .
This is a quick change mount for a Yihua soldering station using their 9071 soldering iron. No magnets or screws, the mount locks on using a mechanical feature. Original Fraks Flexarm project here…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
KODNA Fraktur – Gothic Alphabet & Numbers | 36 STL Files for 3D Printing Bring classic Gothic typography into the physical world with the KODNA Fraktur 3D Printable Alphabet Collection . This digital STL bundle includes all 26 uppercase…
I am making a full opengrid wall and wanted to mount a flexarm to that. This HAS to be mounted to a full grid plate rather than a lite one in order to be able to hold up to the forces put on it. Printed in PETG no supports required. 6…
Die Platten und Teile dienen der Veranschaulichung von Brüchen bei Mathe. Wenn man in der Mitte des Kreises oder auf das obere Drittel der Rechtecke drückt, klappen diese hoch, so dass man auch einzelne Elemente entnehmen kann und nicht…
Something I made during 2020. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
Simple snap-in mount for HS-02A. Might need a little bit of scaling +/- a few % depending on your printer. I'll make a more permanently retained variant if this winds up being problematic / I have more time.
Something I made during 2020. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
Something I made during 2021. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
Pomůcka pro fyzikální pokusy s difrakcí, slouží k uchycení fólií cca 50 x 50mm, aby se nepoškozovaly manipulací rukou.
I wanted to add a light function to the FRAKs arm for small assembly work and utility. This mount uses LEDs i pulled out of a small display base for resin projects or whatever you want to use it for. https://rb.gy/4ywqjt example of what I…
This model adds a cable mount to the center bracket top plate to keep the solder iron looped over the arm system while the device is used. The diameter of the cable keeper is 5mm, the opening is 36 degrees wide, and the keeper is 20mm…
After building my Fraks arm I was speaking with Kenhia who is working on his kTaskLight https://github.com/kenhia/kTaskLight and I thought it would be cool to combine both projects. Initially it was just going to be a light mount that…
Every crew has a 'heavy'. The Smoulder-Kin have 'The Kisser'. This isn't just a machine; it's their holy ark, the colossal Frakk Drill that carried them out of their personal hell. It's slow, sure, but it's cumbersome because it's a…
Vase 8-eckig Fraktal Style mit Innenkörper hohl, kein Support nötig. Für Dichtigkeit muss mit Füllgrad experimentiert werden. Bitte beachtet auch meine Designs auf thingiverse.com und cults3d.com unter gleichem Benutzernamen... Vase…
Some soldering iron brands like ANBES on Amazon (what I use) have the power button close to the front, so with the regular 17mm mount you can't turn on the iron. This just adds a hole to it so you can press the power button. The depth of…
Vase 8-eckig Fraktal Style mit Innenkörper hohl, kein Support nötig. Für Dichtigkeit muss mit Füllgrad experimentiert werden. Bitte beachtet auch meine Designs auf thingiverse.com und cults3d.com unter gleichem Benutzernamen... Vase…
Vase 8-eckig Fraktal Style mit Innenkörper hohl, kein Support nötig. Für Dichtigkeit muss mit Füllgrad experimentiert werden. Bitte beachtet auch meine Designs auf thingiverse.com und cults3d.com unter gleichem Benutzernamen... Vase…
