Counting matching models…
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
Whether you're going portable, mobile, or stationary keeping your radio safe is important. This is just a simple cover designed to slip over the face of the Yaesu FTX-1 it can use either a hair band, or elastic cord to secure it to the…
This is a custom 37° tilt stand designed for the Yaesu FTX-1 Field . The stand is only compatible when the SPG-1 Carrying Protector is mounted. The stand is 3D-printed in Prusament PETG Matte Black using a 0.4 mm nozzle. Print settings…
This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…
This is a simple cover for the back of the FTX-1 when the battery is removed. This cover is a functioning, work in progress. If you print the current version it will fit and cover the back a bit, however I am continuing to design and…
Replacement front and rear body posts for the FTX Bugsta RC Buggy. I know the Carnage has the same part but I am not sure that the holes are in the same place, looks the same chassis but I do not have one to test, perhaps someone could…
Remix from Thing 4530345 - Scale up for a 8mm Spring with a 8.5mm Drop. Lowers the Base of the Spring. Fits perfect for a FTX Ravine aka. Danchee Ridgerock. Alternative for the popular Spring Mod, lowers the Tension of the (stiff)…
The print provides additional support when using https://makerworld.com/en/models/1959626-ftx1-uhf-vhf-whip-support#profileId-2106176 to keep the whip from falling backwards. You place the print on the first right angle adapter.
Stripped the spur gear on my Nitro FTX Zorro so I recreated it to 3D Print. The dimensions are exact to the real spur gear, you may need to scale up the design in your slicer. I had to scale up by 1.5%, this is very important if you want…
Two of these brackets mount to the side of your Yaesu FTX-1 Optima as a spot to anchor a grab handle. This is an alternative to Yaesu's MHG-1 handle. I made mine in the photos by tying a paracord cobra stitch between the two brackets,…
The stock Lee seating die deforms Hornady's FTX 357 bullets, as they have a softer nose. This die forms around that nose and reduces the deformation. It's been a while since I used this, but, if I remember right, I disassembled the die…
FTX Zorro Carnage & Bugsta RC Car Rear Mudguards Fits part number FTX6321 I print in TPU95A Flexi, but you could use PLA+ or PETG. I printed these for my FTX Zorro Brushless but the FTX site advises FTX6321 also fits the Carnage and…
Like making your RC's worse to drive by being more top heavy. Look no further. Here is a little roof rack for your 1/18th crawler. Added bonus it uses 4 M3x8 screws for no reason whatsoever. Why you ask, because it was the spare screws on…
A FTX Fury 2.0 Link Mount for all the suspension to differential linkages. Likely fits: FTX Outback Fury FTX Outback Fury 2.0 FTX Hi Rock This part will work on three of the four mounts (see image). Because the steering mount also has an…
I designed a simple replacement for a broken steering arm on my FTX Ravine. hope this helps. please note I used pet g but I recommend something a little stiffer you will need an m3 heat set insert to take the stock fitting for the servo arm
Smaller front and rear shock towers for the FTX Banzai (and other related chassis that use the same top diff. housing). Requires removal of the top two screw hole area on the diff housings to allow for better body clearance. See pictures…
Original front light cover for the DF MODELS DF-4J Crawler XXL Lost both of them so designed it only from photos. Might be just tiny bit different than original. Mine fits perfectly and just snap into holes on light. No glue needed. Might…
Protectors for the Vandal Aluminum Chassis Plate (Part No. 10930). Needs to be glued to the chassis after press-fitting (carefully with a hammer if needed). I glued also some velcro to the protectors and canopy to stabilize it. Had to…
Designed this from scratch in Tinkercad. Print it horizontally for strength. When assembling, push the metal ball head from the front into the printed pin and then fasten the screw. Print Settings Printer: Sidewinder X1 Rafts: Yes…
Here is a replacement for the front bumper assembly for the r/c car FTX Bugsta (also fits the FTX Outlaw and FTX Carnage). It includes the bumper and the support bracket in two variations. You only need to print one of the two support…
This is a custom 37° tilt stand designed for the Yaesu FTX-1 Field . The stand is only compatible when the SPG-1 Carrying Protector is mounted. The stand is 3D-printed in Prusament PETG Matte Black using a 0.4 mm nozzle. Print settings…
This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…
The stock Lee seating die deforms Hornady's FTX 357 bullets, as they have a softer nose. This die forms around that nose and reduces the deformation. It's been a while since I used this, but, if I remember right, I disassembled the die…
Original front light cover for the DF MODELS DF-4J Crawler XXL Lost both of them so designed it only from photos. Might be just tiny bit different than original. Mine fits perfectly and just snap into holes on light. No glue needed. Might…
Original rear light cover for the DF MODELS DF-4J Crawler XXL Lost both of them so designed it only from photos. Might be just tiny bit different than original. Mine fits perfectly and just snap into holes on light. No glue needed. Might…
FTX Zorro Carnage & Bugsta RC Car Rear Mudguards Fits part number FTX6321 I print in TPU95A Flexi, but you could use PLA+ or PETG. I printed these for my FTX Zorro Brushless but the FTX site advises FTX6321 also fits the Carnage and…
(1) Spur gear cover for the Carbon chassis top plate. Protects loose cables from rubbing against the top of the spur gear. Print in PLA or PETG, should not need any supports. (2) A seal to enable the diff's to be filled with oil. Also…
not many options to mount the Amplifier unit so I drafted these quickly. They use 4mm bolts and have a back clamp since I sandwiched in my car soft side panels.
Battery tray for the ftx utah with the strap hooks removed to fit a longer battery
Original rear light cover for the DF MODELS DF-4J Crawler XXL Lost both of them so designed it only from photos. Might be just tiny bit different than original. Mine fits perfectly and just snap into holes on light. No glue needed. Might…
My attempt on DF-4J/FTX KANYON defender style headlight. Headlight fits into original mounting points for original headlights. No cutting into body. Using original LED. 2 downsides: One LED becomes unused (might be used for under car…
My attempt on defender style grille for DF-4J or FTX KANYON. Grille fits into original mounting points. No cutting into lexan body needen. THERE IS BLACK STICKER BEHIND GRILLE ON PHOTOS! The grille is see-through and I had spare black…
Removable face plates made to fit in a 8 inch tablet holder.
This is a modified version of the Upper plate of the FTX Vantage 2.0 RC car (ref: FTX6261). This version includes a hook and a edge to keep the car's and battery's power cables well in place. I recommend to print this part in ASA filament.
Spare part of the front bumper for the FTX Vantage 2.0 RC car (ref: FTX6254). I recommend to print this part in ASA filament.
3D Print part for FTxD Adapter (see current diagramm) for the FTxD Audio Adapter to use it for digital radio communication. The recommend Print material is PETG with a layer high of 0.1mm For each adapter, you will need two case part…
Prints without supports. Minimal painting makes it look a lot better. I used a black marker to hide the edge of the engine bay and servo tape to install the print.
There is a small panel hiding a spot for a light bar in the front bumper. It is held in place by a few small plastic pegs that are easy to cut. The inside of the bumper has 4 screw holes. 4x M3x8 screws should be more than enough to keep…
Installs using the original screws. Remove bumper first for better access.
it's a crawler body designed for a 200 mm center wheel distance. it inclued bumpers for the ftx outback ranger xc
