Counting matching models…
Hi I remixed the Cable Organizer from Memo since it didnt fit my longer sleeved cables well. There are now 10x 18mm gaps and 2x 10mm its still fits well with the small one from Memo into the Alex drawer, of course the bigger bottom ones.…
A remix on my AirTag Buckle design. I added gaps to the buckle to make it compatible with a wider variety of straps.
Modified version of @salacious_sloth's excellent wire management tray, with wider gaps between prongs.
I just fixed the two gaps. Tinkercad file is here: https://www.tinkercad.com/things/56nTp3habHq-mini-satsana-ender-2-pro-v3-no-gaps
Fix for gaps in the original model through fusion 360
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 12 cylindrical neodymium magnets, Ø8mmx3mm…
This is a rework of a remix, since there were still gaps in the air duct when printing with PETG. mini Satsana-Ender 2 pro v2: https://www.printables.com/de/model/161856-mini-satsana-ender-2-pro-v2 Mini Satsana Ender 2 Pro v3 - no gaps:…
iPhone 13 mini case that fits well, simple to print. Includes camera inlay and bigger button gaps than the original model.
This is a remix of the original to address a few issues I had: Cover was sliding off the back on some long prints due to vibrations Extruded the lip to match the front two pieces to fully retain the glass top PTFE guide was allowing too…
I needed a vacuum nozzle to reach under the gap beneath my desktop CNC machine (the Carvera Air), so here it is! The provided models include an all-in-one nozzle with about 150mm of reach, and a modular set of pieces with 100 and 200mm…
I recommend printing it with the back flat on the build plate and using support unless your printer is really good at bridging, there is a 75mm gap that would need to be bridged.
Recommend pouting wall order on outside to inside for better results.
F32H38 slip ring gapsize = 0,3mm I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
I needed a hanger for mounting cables in a tight gap in my floor boards. I designed this to fit in my 2 3/4" gap.
Cover your blank fan space! Block that extra space from ruining the flow in your system or leave the mesh open to add flair to your case. Originally designed to make 140/120mm compatibility look better, the solid ones can be used…
A remix of https://www.thingiverse.com/thing:1938639 which is a remix of https://www.thingiverse.com/thing:1387260 I wanted a stand where I could charge while using. 1938639 did work, but only at a shallower angle than I liked. So I added…
This part was initially designed for my ‘ PluGuard Extensible Collection ’ and can of course be used for other purposes, to measure a gap / space between 2 parts Simply slide the gauge between 2 objects, like on the animation, between…
Hygrometer thread without the thin areas. Edit: Just saw I put the hygrometer in backwards on the pic :D
3D Printable Bricklayer's Block Line Blocks (Upgraded) This is a rugged, site-tested pair of line blocks designed for professional bricklayers and builders. Unlike cheap, brittle alternatives, this model is built to survive the daily…
Cleaning the horizontal panels of your designer radiator is a nightmare. Not anymore with this nozzle. Dimension is 15 mm, fits easily between our 19.5 mm panels. The socket is slightly tapered to create a snug fit. The inner diameter is…
Design tool for gaps and walls with dimensions 1cm to 10 cm. The tool starts with 1 cm gap and width of wall. Each example is the same height for easy reference. I've used this reference guide when making boxes, letters and anything with…
I have a pegboard I bought from home depot that uses traditional circular holes for mounts. This takes some skadis designs that use the universal peg and mounts them to this specific type of pegboard (5mm⌀ with 25mm gaps).
How to Always Achieve the Optimal Bridging Angle In most slicers, you can only set a single bridging angle, which then applies to all overhangs. This isn’t ideal for circular overhangs or those with complex paths. Ideally, the bridging…
If you need a stand for a Styrbar switch for places like a bedroom where a flat surface is hard to find, this version is for you. The model features a vertical flange which can be wedged inbetween. say, the bed headboard and the wall.
This is a model of a standard American interior door frame and trim, this can be used for fixing gaps at the bottom of door frames after replacing your flooring with a different type that is not a high as the previous (like when going…
To prevent sucked-in particles from getting stuck in the narrow nozzle, the attachment nozzle is printed from flexible material and includes a central ridge to ensure that the nozzle does not collapse under vacuum pressure. Suitable…
In the photo, the original is on the left (holds 4 decorative bits) and the remix is on the right (holds 6 straight bits)
I made this model because my printer had issues to print low-tolerance moving parts in place (they would always meld together). With this model I figured out that most of my issue was an elephant foot, which was easily solved with going…
This is 7x7cm mesh with 0.5mm strings and 0.25mm gaps Designed for printing in 2 layers with a layer thickness of 0.2 mm Printing goes in a long serpentine pattern for speed and to prevent defects at the ends Make sure to properly…
Using Camo Starter Clips , it's difficult to get the proper gap between deck boards. Specifically, Fiberon composite decking used with the Camo Edge Clips hidden deck fastener system . The Fiberon manufacturers install instructions call…
Nail polish organizer for various bottle sizes and other accessories.
Tired of not being able to open those tricky compartments? Then this quick and cheap print is for you. Its small design lets you print it in under 3 minutes, and it features a keyring hole at the end, giving you peace of mind knowing that…
Park a loose filament end near a stored spool rim with an original open-jaw clip concept. Three clear-gap presets: 2.2, 3.2 and 4.2 mm. Customize the rim gap with the native TrueGeometry Playground recipes. Unprinted fit-test prototype.…
Using Camo Starter Clips , it's difficult to get the proper gap between deck boards. Specifically, Fiberon composite decking used with the Camo Edge Clips hidden deck fastener system . The Fiberon manufacturers install instructions call…
This is 7x7cm mesh with 0.5mm strings and 0.25mm gaps Designed for printing in 2 layers with a layer thickness of 0.2 mm Printing goes in a long serpentine pattern for speed and to prevent defects at the ends Make sure to properly…
How to Always Achieve the Optimal Bridging Angle In most slicers, you can only set a single bridging angle, which then applies to all overhangs. This isn’t ideal for circular overhangs or those with complex paths. Ideally, the bridging…
