Counting matching models…
The StageTop Dice Tower is a free sample from our crowdfunding campaign for StageTop: The 3D Printed Gaming Table . While made to work with StageTop Gaming Tables, this Dice Tower can also be used by itself and is guaranteed * to improve…
The StageTop 4 Deck Card Shoe is a token of appreciation for those interested in our crowdfunding campaign and accessory for StageTop 2: 3D Printed Gaming Tables . While made as an accessory for StageTop Encore Gaming Tables, this 4 Deck…
Wood Parquet - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. It has a 1 inch grid for D&D. Available as full tile, half tile, quarter tile and corner tile. There is also a half tile with a hole for the original…
The StageTop Water Tower Dice Tower is a free sample from our crowdfunding campaign for StageTop Themed Tables 2 a themed table expansion pack for StageTop the 3D Printed Gaming Table . While made to work with StageTop Station, a train…
The StageTop Remixable PlayTile Series is compatible with the StageTop: The 3D Printed Gaming Table . These remixable PlayTiles are provided at no charge for the creative community to create and share customized gaming surfaces,…
Square Stones - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. It has a 1 inch grid for D&D. Available as full tile, half tile, quarter tile and corner tile. Additional quarter tile with integrated water well, and…
Stone and Grass Paths - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. They have a 1 inch grid for D&D, but also have versions without the grid lines. All tiles are StageTop quarter tiles (4" x 4") and tested with…
This 3d model was generated using AI!🤖. The print is oriented at a -36.23° tilt, uses automatic supports, and a couple of extra supports on the soles of the feet. The print was tested on a P1S. If you feel that the tilt angle is too…
If you need a flat, tileable hex-grid for playing games like Battletech or Gloomhaven that need a ~33mm hex size (Flat to Flat) these are for you! Two versions: Hex Playtile: Can tile infinitely in all directions, it is symmetrical.…
This is my remix of the blank tiles. All I have done is the quarter tile. Might make a corner and full tile later. Once
The original board pieces are numbered in a sans font using a .2mm cutout starting with the upper left section. The expansion board is numbered in a serif font using a .2mm cutout, also stating with the upper left section. Bonus half…
StageTop Hexagonal (Hex) PlayTile for Battletech, Gloomhaven or other Game but with indented hexes. Remix from: https://www.printables.com/model/438818-stagetop-hexagonal-hex-playtile-for-battletech-glo
This is intended to be used with the StageTop Table Top system. This is used to turn the tile locks.
Love picking up tiny board game pieces? Annoyed at how long it takes to dump tokens and chits into their proper boxes? Ever scream out, “There HAS to be a better way!” Wonder no longer with the StageTop Trap Door Hatch PlayTile. Designed…
This tower is made to fit with the nice gaming table system from gut_shot_games Stagetop. The top feature is made to fit the holder plate on the Stagetop. The tower provides improved ridges for a better tumbling of the dice, by also…
This is a really quick and easy tool to help you remove/install the frame locks. It has imprints in 2 directions so it works both at 0 and 90 degrees. The spacing has been scaled up 3% from the original frame locks so regardless of your…
Here I share my version of the so called Riggers Multi Tool. None of the ones to buy suited my needed so I created a new one for 3D printing. The multi tool contains the following fittings: M10 butterfly nut M6 butterfly nut 22 mm nut…
The StageTop Remixable Rail Series is compatible with the StageTop Encore from the StageTop 2 3D Printed Gaming Tables series. These remixable Rails are provided at no charge for the community to create and share customized rails for the…
The use of this brace will help support a larger stagetop table than the table its sitting on. This brace provides strength and rigidity to the outside row of tiles. It is for use with the elite style legs. The long tube goes on the…
The use of this brace will help support a larger stagetop table than the table its sitting on. This brace provides strength and rigidity to the outside row of tiles. It is for use with the elite style legs. The long tube goes on the…
This StageTop remixed Half PlayTile, compatible with the StageTop: The 3D Printed Gaming Table, puts the dice tower tray on the surface of your table. It is double-sided so that the dice tower can be rotated towards the current player for…
Massagetool for triggerpoint massage
The STL files in this folder can be used to modify the Gut Shot Games StageTop standard rails so that they can be used as instantly accessible side storage. This is convenient for game pieces that benefit from being on standby but don't…
Remixed off of D. Harris's approach for supporting frames without a leg to stand on a surface, this remix is more modular and allows for printing a corner bracket on smaller printers. I built this to support both the edge of the table,…
Diamond Plate - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. Available as full tile, half tile, and quarter tile. There are two versions of the half tile (A and B). You'll need both versions to not break the…
Attenzione durante la stampa e la rimozione nei pressi dei capelli.
If you're like me and have sausage fingers, in some places the rail locks on the Stagetop gaming table can be awkward to turn, especially in the group of 4 when acting as the short legs. So, I made a little tool to make it easier for me.…
I felt that when I tried to lift my table it flexed a bit much. So I made some reinforcement brackets. They snap onto the elite legs, so no need to print new legs. Ive only tried this on a 3x4 table, dont know how good it works on bigger…
StageTop Remixed PlayTile - Half RPG Tile Compatible with StageTop 3D Printed Gaming Tables. Dices slots, pencil tray, Counters with peg, Organizers and Card tray. Tests print and photo done with 0.1 layer height.
This 3d model was generated using AI!🤖. The print was tested on a P1S. Please consider adding extra supports to sleeve! Corrections were made in Blender, fixing some details and making the model printable. The model is divided into two…
The StageTop Remixable PlayTile Series is compatible with StageTop 3D Printable Gaming Tables (v1 & v2). These remixable PlayTiles are provided at no charge for the community to create and share customized PlayTiles for the ultimate…
I had printed my frame lock tiles on a textured bed so they didn't turn very well when trying to lock them. So… I decided to create a spanner for not only the frame locks, but the playtile locks too. There is one handle and the 2 types of…
A keychain with a cute Geto Suguru design.
I prefer 30mm grids for my TTRPGs, remixed the PlayTiles for my StageTOP table. Due to the odd number of squares per tile, the Corner tiles have two partial square edges and the Half and Quarter have one partial square edge. Each partial…
I had printed a set of 4 color Catan Pieces for my nephew and then my StageTop pledge came in with X1C printer so I designed a quick board to improve my fusion 360 skills and printed it and tested with tiles before starting StageTop…
This model serves as a practical chip holder. Players of too many bones will appreciate the opportunity to optimize their gaming session and efficiently organize game pieces. At the same time, the Play Tile offers poker players the…
I tried to include all needed parts to save table place. You can use it separately, but it has holes for StageTop Table
Keychain modeled based on the symbol referring to the character Geto Suguru from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
Secure storage solution for easier transport of the standard clips of the StageTop gaming table. This design is only for personal use, no commercial use of any kind.
This is a work in progress. Will update with photos once the rest of the table is done printing. I wanted to make a PlayTile with Dots for popular modular bricks, but math is hard and getting the spacing to work across the whole StageTop…
I like the white tile look, but wanted some more contrast, so painstakingly I made these with a lot of skill and only the finest of of maths. Just kidding. Anyway…This printed on textured PEI without a brim just fine. Your printer needs…
Incorporates leg lock pieces into the stable table system for improved table edge stability. leg lock mount - mid: A combination of "Leg Mount - Mid" and “Leg Lock - Medium”, shortened so the bottom is level with the leg mount when…
Four player aggravation board. You'll need to print four of these. I also uploaded the files in case it needs some adjusting.
I wanted a basic bracket for my screen that made it easy to remove and adapt to different screen sizes. works best with screens with a flat back surface. Included is a corner and a full tile depending on what suits best. The bracket…
I'm liking my stagetop set and decided to make some board games for them. Looked up official chess board size and choose standard that fit on 4 tiles. Multicolor and mono color stl's. Thinking I'll make some cheesy backgammon / checkers /…
so i thought someone will do it at some point why not me adding one modular system to another
A simple playtile for Oathsworn: Into the Deepwood - keeps the battleflow cards organized. I printed 2 each and put them in the corners of my 5x4 table. This design is only for personal use, no commercial use of any kind.
The StageTop system has some great storage options, but none for the Elite Rails. So I've gone ahead and made one, based on the original rail carrier but widened for the Elite rails and with slots for the Elite clips. I have a Voron 350…
StageTop Chess Playtile Chess Playtile (full) for the StageTop 3D printed gaming table. The playtile is designed to be printed with a single-nozzle printer. First the black grid is printed and kept on the build plate, followed by the…
StageTop wood plank holder for staining the planks after printing. Both versions (quarter and half) fit.
Dashboard for Oathsworn holding all pieces and cards required during the encounter phase for one full character No real place for money tokens, but those are not required during the encounter phase. I only modified the original version…
I'm liking my stagetop set and decided to make some board games for them. Looked up official backgammon board and decided that I would limited myself to 4 tiles instead. Multicolor and mono color stl's. Thinking I'll make some cheesy…
This is a remix of the StageTop PlayTile that adds a Viking flair. Designed to use minimal color changes to make it more filament efficient and able to be printed without an AMS quite easily. I have added the base design if you would like…
Designed for stagetop, with diagonal squares raised 1mm so you can pause printing, change filament, and print in a second colour Make sure to get the diagonal direction correct when placing, your near white corner diagonal should be on…
Keychain modeled based on the symbol referring to the character Geto Suguru from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
In den Ring können die günstigen Plastiktöpfe aus dem Gartencenter eingehängt werden und zu einer Blumenampel umfunktioniert werden. Der Vorteil vom kompletten Ring gegenüber einzelnen Haken zum einhängen ist, daß auch relative billige…
Description This remix of the StageTop Elite Rail Storage offers a modular solution for storing 8 or 10 rails. The original design was limited to 8 rails, but this remix extends its capacity with an additional middle piece. Assembly…
The StageTop Height Gauge is your go-to tool for aligning heights with ease. Fusing with rulers or tape measures is so last campaign! Primarily designed to match the adjustable TV risers with the frame of your StageTop Virtual Tabletop…
The challenging part with this thing is how tiny the details of the printed drawings get when scaled down to fit on this. The often used linewidth of 0,4 mm will likely smear the lines together and pile a heap of plastic. I recommend to…
same as my other remix but now with The Rock because everyone seems to love the rocks head on EVERYTHING!!!
You can the corner tile in the slicer in half to be able to use it for other games. I used height range modifier (5.8-6.2) and made the blue surface with Hilbert pattern to enhance the “sea” look. Color change 5.8 (layer 29) for blue.…
The challenging part with this thing is how tiny the details of the printed drawings get when scaled down to fit on this. The often used linewidth of 0,4 mm will likely smear the lines together and pile a heap of plastic. I recommend to…
This rail file can be used if you want something flat to cover your edges. Our DM wanted a break in the LED/Hex rails where the keyboard and mouse could sit for the computer screens without having them be too high off the table (if…
StageTop PlayTiles v2 - Full, Half, Corner, Oct A&B.
There are two sizes of this thing: 83x96 mm and 50x57. The model files are named accordingly. The details of the printed drawing on top get tiny when scaled down to fit on this. The often used linewidth of 0,4 mm will likely smear the…
Swapped out the D20 for a BioHazard symbol. Printing with black for the base and fluorescent green for the embellishment
🔩 Fidget Screw – Stress Relief Screw Toy The Fidget Screw is a simple yet highly satisfying fidget toy designed for stress relief, relaxation, and fine motor skill training. It features a realistic threaded bolt and nut that can be…
Mit diesem simplen Halter können Sie probklemlos und werkzeuglos eine Hängepflanze an ihr LACK-Regal hängen
I use an ONN Roku TV for gaming, and I didn't like how high off the table the brackets lifted the TV. The TV has a larger thickness at the bottom than the top, so I needed shorter brackets to get it better seated.
You can the corner tile in the slicer in half to be able to use it for other games. I used height range modifier (5.8-6.2) and made the blue surface with Hilbert pattern to enhance the “sea” look. Color change 5.8 (layer 29) for blue.…
The StageTop Remixable PlayTile Series is compatible with StageTop 3D Printable Gaming Tables (v1 & v2). These remixable PlayTiles are provided at no charge for the community to create and share customized PlayTiles for the ultimate…
3D printable topographic miniature of Washington D.C., Georgetown - 🇺🇸 United States Capture the beauty of Washington D.C., Georgetown 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
This 3d model was generated using AI!🤖. The print is oriented at a -36.23° tilt, uses automatic supports, and a couple of extra supports on the soles of the feet. The print was tested on a P1S. If you feel that the tilt angle is too…
I use an ONN Roku TV for gaming, and I didn't like how high off the table the brackets lifted the TV. The TV has a larger thickness at the bottom than the top, so I needed shorter brackets to get it better seated.
Here I share my version of the so called Riggers Multi Tool. None of the ones to buy suited my needed so I created a new one for 3D printing. The multi tool contains the following fittings: M10 butterfly nut M6 butterfly nut 22 mm nut…
This tower is made to fit with the nice gaming table system from gut_shot_games Stagetop. The top feature is made to fit the holder plate on the Stagetop. The tower provides improved ridges for a better tumbling of the dice, by also…
This model serves as a practical chip holder. Players of too many bones will appreciate the opportunity to optimize their gaming session and efficiently organize game pieces. At the same time, the Play Tile offers poker players the…
Keychain modeled based on the symbol referring to the character Geto Suguru from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
3D printable topographic miniature of Washington D.C., Georgetown - 🇺🇸 United States Capture the beauty of Washington D.C., Georgetown 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
This is a silhouette of suguru geto from jujutsu kisan. It was requested by someone in my group: https://www.printables.com/group/3d-design-e5yd4pQ/comments If you want your own ideas designed then join and comment.
More information on the website: https://dynamod.games In order to use these files, you need to have the StageTop files. You can purchase them from here: https://www.kickstarter.com/projects/gutshotgames/stagetop-the-3d-printed-gaming-table
Untersetzer für Hängetopf mit Auslauf beim Kippen zum Bespiel in eine Flasche, …. . /Saucer for hanging pot with spout when tilted, for example in a bottle, .... .
I don't know ways to print this i use my Affina to print this and I use supports with this print and it works fine with supports and I print with 7.55? mm. mm abs filament
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #8 (0.72mm) swap to…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #9 (0.8mm) swap to…
