Counting matching models…
Folding puzzle map of the Czech Republic divided into regions. You can adjust the size in PrusaSlicer - I adjusted it to 150%. Later I will add the option as a blind map without names. I see the use in education for children in the first…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
This bracket is made in a way, that the cooling capabilitys of the Legion Go are not limited by covered fan intakes. I recomend using the Dovetail function in your Prusaslicer for the best print results and to save on support material.…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Hello everyone I make the puzzle of the France with the old regions
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
Two versions of the L shaped deployment zone markers for Star Wars Legion. One version is layered for a single filament printer, you can change the color at different layers. The other version is for an MMU style printer that allows a…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Roman legionnaire fighting Dacian
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
The original model had incorrectly sized holes for 6x3 magnets. This is a quick and dirty fix using negative volumes to give the correct clearance. When opening the 3mf file use the import geometry only option.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Porta sapone da viaggio. Soap Holder
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
Inspired by /u/ShakeWeightMyDick's post on reddit ( https://www.reddit.com/r/GhostsofSaltmarsh/comments/cnmth0/3d_topographical_map_of_the_saltmarsh_region/ ), I designed a 3D printable version. NOTE: The uploaded gcode contains all the…
Print approx. €10.60–€12.96 excl. taxPreliminary estimate for one variant
San Tan Regional Park is a hiking/biking/horseback riding area near Phoenix Arizona. I hike a fair amount there and thought it would be cool to make a 3D map of the park. Fortunately, I found a wonderful project out of Iowa State…
Print approx. €10.85–€13.27 excl. taxPreliminary estimate for one variant
Tactile image of the Brazil's northeast region map. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Working on this for the contest. Rather than pouring water through a funnel just unscrew the top. Added feet to the bottom so that the surface area in contact with bottom surface is lowered. Planning to add a cap opener to the bottom as…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Ricambio Tappo Gangio Tendine
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Questo simpatico soprammobile è l'ideale per fare un regalo carino e simpatico ai propri amici. Da stampare in PLA o PETG: -Usa i supporti organici dal piano di stampa -Usa un riempimento del 15% da 0mm a 2mm e poi aumenta a 50% fino alla…
Print approx. €3.92–€4.80 excl. taxPreliminary estimate for PETGSource material: PET
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
Adapter for lenovo legion go connect
Remix of the Legion Go Controller Adapter, which is printed in 2 parts with 3 screws. The Remix is printed as one print. Support (i used organic/tree) is requiered Brim is a can, but not a must My printer: Anycubic Kobra 2 Plus I printed…
The most ideal way to print is vertical and supports for the controller interface, I've printed flat and for me at least it hasn't worked out as well. Lastly I printed with a lot of perimeters for strength and 5% infill.
A stand for the Lenovo Legion 5 laptop that allows you to close the lid
This striking 3D printed model features a traditional Christian cross, exquisitely adorned with the figure of Jesus Christ and entwined with intricate vine detailing. The design evokes a sense of reverence and spirituality, making it a…
I use my GO as a UMPC so a lot of times I don't use or have my controllers connected. I also like my Xbox controller a bit better than the GO's Controllers anyway. This will cover the sides, but I make no promises it will protect from…
Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…
This replacement cartridge bracket will let you play Japanese titles on your US N64. Simply disassemble your N64 and replace the existing cartridge slot bracket with this universal bracket. It’s that simple. Install Guide Updated design…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
Big Eeveelution fan? Looking for the whole set of 9 models? Find the rest of them over on my Patreon ! Or Show your support by buying me a coffee ! So which eeveelution is your favorite? I personally think Jolteon, but that's just because…
A simple YuGiOh Deck Box that holds 55 cards(40 standard deck, 15 extra deck) sleeved in Japanese-sized sleeves.
These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…
A set of improved tokens for Warhammer: The Horus Heresy: Legions Imperialis from Games Workshop. Included are the four order tokens (Advance, First Fire, Charge and March), a Fallback token, and six objective markers. Use these instead…
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
I'm not very good at making models. I wanted a case when carrying the Lenovo Legion Go as a tablet in my backpack. Files are attached. For me, I'm printing it with PETG at 0.2mm layer height with supports everywhere. Fusion 360 export is…
This play-mat is designed for use with or without approved card sleeves. The Extra Deck is set to handle 15 Cards The Main Deck is set to handle 50 Cards The Graveyard is set to handle 40 Cards This is designed for use with the classic…
==DE== Dieses 3D-Modell ist eine Prop von Legions Messer aus dem Horror-Spiel 'Dead by Daylight'. Es teilt sich in zwei Teile und nutzt einen Zapfen an der Klinge für die optimale Verbindung. ==EN== This 3D model is a prop replica of…
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
Voici le dragon ultime aux yeux bleu <(^^)>
No supports needed, 3 wall lines recommended (although I was successful in printing it with 2 wall lines). Please print the STL as shown (on its side) for the smoothest result.
Remix of Legion Go Controller adapter and 3d scanned right controller. Now you have both options with one stand you can take anywhere. Add 3 M4 screw to combine and 1 10x2mm magnet for properly FPS-mode work Also you can buy mouse glides
This is a significant remix of the following files: https://www.thingiverse.com/thing:3035256 Adding 10 new tokens and converting 7 of the original to STL! All of the tokens listed under Effect and Status are included in this upload:…
The legions of Rome often have their strength and skill at arms attributed to their iron discipline and cohesion as a unit. This is true but it is only so due to the officers the form the head and mind of the legion. Centurions are the…
Wall mount clamp /bracket / holder for 2020 Alu Profile - Fissaggio a muro per profilo 2020 Update: 04/02/2025 added - Wall Mount Clamp for 2020 Alu Profile_Cover.stl Suitable for:…
Same dimensions as the other movement tools in Legion, same width and height. Made grooves for painting, if that's desired. Also a 1.5 range tool for use with deployment cards, where all of them require 1.5 range measurements.
I have not printed this design, but would try flat first. Vertical might be a pain. I'd assume you'll need supports if vertical, but for horizontal you'd still need supports for the controller interface. I would print with a lot of…
Made to print quickly and easily with no support. Print Solid, PLA is fine. Only needs 7-8g of filament (2-3m). 6x 5mmx2mm magnets needed (what I already had on hand) 3 on each side. Please remix for other common magnet sizes and if you…
The original model by Noahghclark was too tall for me to fit into my tins, as the lip around the top was narrower than the body. I adjusted it to make it shorter and added slots for your thumb to slip in and grab cards easier. Also…
un corno napoletano pensato per portare fortuna in casa, infatti questo corno puoi tranquillamente poggiarlo nella sua corona e tenerlo su un qualsiasi mobile in casa così da tenere le malelingue fuori dalla portata della famiglia stampa…
Sound directing adapter For Lenovo Legion Go
Modular controller adapter for the Legion Go. The rails for the left and right controller are printed separately and connected to the body with M3 screws / nuts (8mm length). You can design your own body and screw the rails onto that, or…
I like to use the cardboard sliver boxes for TCG storage, but dont seem to be able to buy the single card width boxes any more These templates allow you to cut out and fold the correct shape from cardboard eg an amazon box. See the photos…
- print vertically - no support - lower layer height is better i created this model because i had issues with supports on all the available ones. i printed with a 0.2mm nozzle, 0.4 should be fine.
This is a set of pieces that can be used to recreate a Clone Trooper, 501st Legion figure at 500% scale. This figure was released in 2020 and included in two sets between 2020 - 2022. All of the stl files needed to create this have been…
Laptop raiser (stand) for lenovo legion 7 and 5 pro, improves ergonomics and reduces temperatures (up to 10 degrees in some cases!) Fits perfectly to legion's rubber feet Recommended print settings Perimeter generator: classic (not…
Base plate for Star Wars Legion modeled to the exact size of an original.
With the updated 2024 version of Legion, there are now new Player markers and Point of Interest tokens. There's an alternate version that has space for a standard 28mm legion base, usable for instance with Moisture Vaporators miniatures.…
Very early model, not responsible for damage to your unit.
A 3D sign of the YuGiOh logo that achieves multicolor through layer height pauses.
Boite de rangement de carte yugioh! le modèle est prévu pour être empilé les un sur les autres. Séparateur inclus. ----------------------- UPDATE 04/04/2025 Rajout d'un cache poussière. /!\ c'est un prototype qui n'a pas était imprimé,…
printed using 0.4mm nozel with layer hight of 0.12mm
Want a modular funnel system that slips over each cartridge like a lovingly crafted glove, ensuring no powder spills, but dont feel like dropping a hundred quid on it? Whelp, you came to the right place! Behold, the majesty of an…
Bring faith and inspiration into your home with this beautifully detailed Jesus Christ Statue. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and exclusive monthly…
The model is symmetrical, so you don't need to flip it, just print 2. While support removal is harder, I've personally found the strength of the joy con side to be much stronger if printed in the orientation shown in the picture. You will…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
Perfect and simple Oil Filter Disassembly Tool for Piaggio Vespa Gts and more. Ø 50x67 mm for PIAGGIO Leader Quasar LEM for Vespa ET4 LX LXV S Primavera Sprint GTS GTS Super GTV GT 60 GT GT L 946 125-300ccm 4T AC LC
Screw-In Anchor Cable Zip Tie Mount 6 / 10 / 20 / 30 / 40mm - Fissaggio fascetta 6mm 10mm 20mm 30mm 40mm 29/12/2025 Update: added 6mm version All our designs are free to download and use—we believe sharing drives innovation. Your support…
This is a roman pugio with an 8-inch blade. This has a gladius style grip and is a 3 part assembly. It requires glue to hold. there will be intentional lines on the model that indicate what separates wood from metal. The painted pictures…
I wanted some nice quality custom tokens for my Star Wars Legion rebel army so I designed these. You can print it in multi color using a color change. I also designed tokens for all the other legion factions. To make it a bit nicer I…
Just another triangle shaped holder. Measured so that the controllers sit comfortably in your hands while your elbows are at your sides. I spent a week or so playing without anything joining the controllers to take measurements and test…
An aternative to the existing Lenovo Legion Go Joystick Protectors
I'm going through and CADing up all of the buttons from my Legion Go and decided to make some mods first. I’ve made the D-pad “Stock” in 1 and 2mm taller versions. Along with the D-pad “Pro” in 1 and 2mm taller versions as well. The Pro…
Kanto Region gym badges from Pokémon Let's Go Pikachu or Eevee. My son needed some gym badges for his Halloween costume so I made some. Prints on FDM or resin printers. The ones in the image are printed in UV resin on a Mars 2 Pro and…
Inspired by some examples I have created this bracket to mount the license plate on the Piaggio Zip scooter without fender. You have to add two M8x20 bolts and lock nuts to mount the two halves together. The frame can be mounted on the…
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
I searched high and wide for a replacement stick for my Lenovo Legion Go that was both easy to print with minimal Supports and comfortable to use. While there are some decent options already out there, they weren't really what I was…
Intended to be used with an FDM printer. This was designed to fit all the 3D printable Status tokens that can be found here: https://www.printables.com/model/426438-sw-legion-tokens Fits at least 11 of each token, and 2 command tokens one…
This is the standalone token box for “Star Wars - Legion” tokens. I made one to fit the Feldherr Mini Transport Box, but this is not this one. And yes, you will need a rubber band to hold them together. I made one, use what ever makes you…
Lenovo Legion Go monitor stand holds the Legion Go in the back and a portable monitor in the front. An optional OneX eGPU base can be printed instead of the standard foot for a more compact setup with the OneX eGPU. I've tested up to a…
I wanted to create a print-in-place protector similar to what I've seen out there for the Steam Deck. This has very tight tolerances. Print topside down with supports for the center bit. Once completed, remove the supports then with a…
Es un simple adaptador para el tapon del depósito de gasolina de una piaggio mp3. En algunas ocasiones, esta demasiado duro para soltarlo, simplemente ofrece una mejor sujeccion. Se puede dejar montado y no molesta a la hora de cerrar la…
I love my Legion Go, but as you may know, one of its biggest points of failure are the locking clips. I searched high and low, and could not find replacements available for sale - 1st or 3rd party, EXCEPT one guy selling a SINGLE PAIR for…
ATTENTION: FOR THOSE WHO NEED TO TOUCH GRASS OR DID NOT GET ENOUGH ATTENTION AS A CHILD. HEED MY WARNING: I AM VERY DELIBERATELY WITHHOLDING INFORMATION ABOUT THE START/SELECT BUTTONS BEING INCOMPATIBLE WITH MY FREE MODEL THAT I HAVE…
Side cover compatible with Gamesir G8 plus controller
The most ideal way to print is vertical and supports for the controller interface, I've printed flat and for me at least it hasn't worked out as well. Lastly I printed with a lot of perimeters for strength and 5% infill.
This would probably be better printed vertically to make the controller interface teeth as strong as possible. I recommend lots of perimeters and little infill. I did not print this model, but it is the same as my angled versions.
Vespa Piaggio -Old_Style logo Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hobby 12/07/2024 Update 03/05/2025 Update…
3 wall lines recommended infill 10-15% (10% with 3D honeycomb infill worked fine for me) no support needed, don't worry please print on its side for smooth surfaces (I already rotated the model in the STL file for you) 2 versions to…
Here is a millennium ring inspired from the hit anime show yugioh, I recommend sizing at 75% for a life size scale but feel free to go smaller for pendants and earrings. This model does require glue, I recommend, zipties to hold the model…
Assassin's Creed Legion logo, based on the rumor images floating around! I couldn't track the original creator to give credit! The base isn't required. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 10%
The lettering and obverse picture is from Denarius texture. The reverse picture is changed to Legion Bull. Print standing with supports for sides of coin body. Category: Props
El diseño está realizado a 10mm en total de altura pero recomiendo cambiar en el laminador el tamaño en eje Z de la base a 3mm y el resto de componentes que van encima a 2mm para ahorrar tiempo y material.
I needed an LP counter for me and my brother's duels. I found someone who made one but I didn't want to make the whole thing so I made my own stand and version. Hope you like it!
Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…
Ich habe mal eine ganz schlichte Yu-Gi-Oh-Box in Fusion entworfen. @Ich hatte bis jetzt noch keine Zeit, sie zu testen :D) @@Die Box ist so gestaltet, dass die gesleevten Karten reinpassen, die Toleranz beträgt 0,25 mm sollte somit auf…
I separated the files, to make printing easier. And, I also edited one of the files, to make the Tie Figher fit better. ORIGINAL FILE: https://www.thingiverse.com/thing:3035408
This is a small Regio-Jet style aircraft, designed by my self.
Present for my son's friends on their birthday. Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BÁSICO from Ctrol 3D in colours Yellow, Black and White. Clolours: Yellow thick 2mm, Black 1mm and White 0.8mm
An easy printable model of Castel Nuovo (Maschio Angioino) in Naples, Italy. I designed this after finding scans that are too detailed, won't print right or don't quite fit the style I was going for. Prints well on the Prusa MK4 - no…
![Legion Go - Ergonomic FacePlate [PUBLIC BETA]](https://media.printables.com/media/prints/1178686/images/8982183_e9a83ab1-96b8-4640-9dea-14aa4de254d2_49d3264f-ebe6-4601-ba18-facc2b51c10a/img_0271-enhanced-nr.jpg)
