Counting matching models…
Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…
Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…
Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…
A circle cutting jig to cut circles from 80 mm diameter to 300mm diameter (minus half the radius of the cutting tool). It has a adjustment slider to set the radius, and a split adjustment to allow for you to set the radius and move into…
This model is a base plate for Bosh GKF 550 router. It is designed to be as close as possible to match the original base plate mounting system. The stl file is large, that's why I also put the editable version. In the back, the hole must…
Wall Hanger Bosch GKF 12V-8
Wandhalter für die Bosch GKF 12V. Der Gabelschlüssel kann seitlich eingesteckt werden.
Eine Austauschbodenplatte für die Bosch GKF 12V-8 Kantenfräse um die Fräse von unten an einen Tisch, in meinem Fall Bosch PWB 600 zu klemmen. Die Klinge wird nicht verdeckt, ein Anschlag kann auf ein Holzplatte mit passendem Ausschnitt…
I needed to cut a circle but only have a Prusa Mini+ to print on and shortening the length of mrjoda's model to fit my bed meant I couldn't cut large enough circles so instead I re-combined the pieces together and then broke them into…
This model is replacement base plate for Bosh GKF 12V-8 router (equivalent to ref 1 600 A00 N9C). It is designed to be as close as possible of the original base plate. Autodesk Fusion 360 file is provided if you want to make so…
This super expensive Bosch GOF 1600 router has a super unusable vacuum adapter. Which on top breaks easily. This one is hard to destroy. The router can be used almost to minimum depth. OSVac fits directly. Print with PETG, 30% infill, 0,2…
I did not like the The Tork Craft router table method of connecting the router. Therefore I created a adaptor. I used: 4x M4x16mm to connect the router to the plate. 3x M5x20mm, a washer and wing nut to connect the base to the table.
Edit : it's for a L-Boxx 136 Bosch didnt provided insert when you buy the GKF in box. The only one insert is with the GHO I draw it with sketchup i Cuted the stl in half and in 4 parts, so you can print on small printer If you appreciate…
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling. Scanned with a Creality Scan Otter.
This is an improved version of https://www.thingiverse.com/thing:4111887 to reach tighter radiuses. With a Ø6mm bit, it's now possible to reach a minimum of 13mm internal radius (cut a disc of Ø26mm) or 19mm external radius (cut a cutout…
This is a remix of https://www.printables.com/model/254729-circle-router-jig-for-bosch-gkf-12v-8 Take a look there for more details. I have a 300x300 format printer and wanted to print the base of the jig in one piece. So i merged the…
Hallo, dies ist eine Modifikation der Grundplatte von Killerwurm007! Mit diesem Fräszirkel sind Kreise ab ca 31cm möglich! Den maximale Radius bestimmen die beiden V2A Rundstäbe! Ich hab vorn ein M8 Gewinde geschnitten, eine normale und…
Small Base Plate Mod - Long Shape This remix of the small base plate for the GKF 18V-8 can be mounted to the Fixed Base. The shape is longer to achieve better stability. In addition, there is a Porter Cable version, where template guides…
Allgemeines Staubabsaugung für die 12V Kanten Fräse von Bosch Professional (GKF 12V-8) Der Sauganschluss wurde bewusst nach unten ausgerichtet, damit dieser zu wenig wie möglich stört. Der Anschluss ist auf einen 36mm Festool Cleantec…
I designed this Insert for the Frogbox V2 ( https://www.thingiverse.com/thing:4094861 ) to store a few common 6.35mm (1/4") router bits, plus the 17mm spanner for the Bosch GKF12V collet,and an allen key for changing guide bearings. There…
Large Base Plate Mod - Porter Cable This remix of the large base plate for the GKF 18V-8 can be mounted to the Plunge Base TE 600 and Fixed Base. In addition, Porter Cable template guides can be mounted in the middle of the base plate. An…
Edge Guide Fence Mod This modification can be used for the edge guide of the Bosch GKF 18V-8 and GLF 18V-8. Additional Components: You will need M5x10 screws or thumb screws and short M5 heat-set inserts, like*: Thumb Screws Heat-Set…
Mit Hilfe dieser Grundplatte kann die Fräse zentriert über eine Leiste oder die Stirnkante eines Bretts geführt werden. Dabei muss je ein Dom auf je einer Seite des Werkstücks anliegen.
The original shoe for my Bosch GFK 550 palm router broke and I couldn't source a replacement so I designed and printed one. The one pictured was just my first test to confirm dimensions, so I printed as fast and as cheap as possible with…
Small Base Plate Mod - Porter Cable This remix of the small base plate for the GKF 18V-8 can be mounted to the Fixed Base. In addition, Porter Cable template guides can be mounted in the middle of the base plate. An appropriate dust…
Die Grundplatte wurde vergrößert und der Innendurchmesser angepasst, um eine stabilere Führung der Fräse auf dem Werkstück oder eines Werkstücks auf der Fräse zu gewährleisten.
Bosch GKF 600 Hand milling machine - dust extraction - vacuum adapter
GKF 18V-8 Bosch square base plate inverse
Für die kleine Kantenfräse habe ich nach einer Alternative zu der mitgelieferten Grundplatte gesucht um z.B. Dübel und Kanten zu bündig zu fräsen. Die o.g. Kreisschneideschablone wurde verändert und getestet. Hauptänderung: Platte nach…
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling. Scanned with a Creality Scan Otter.
This is a remix of https://www.printables.com/model/254729-circle-router-jig-for-bosch-gkf-12v-8 Take a look there for more details. I have a 300x300 format printer and wanted to print the base of the jig in one piece. So i merged the…
Bosch GKF 18V-8 baseplate with small center hole. Stops the router from tilting when chamfering small corners.
Bosch GKF 600 Hand milling machine - dust extraction - vacuum adapter
Bigger Base Plate for the Bosch Professional GKF 18V-8 Should be more stable with it. Original plate is very small. Printed in PETG and PC Carbon. Both seem to be stable. Attached also a file with the original size of the plate.
Bosch GKF 18V-8 baseplate with small center hole. Stops the router from tilting when chamfering small corners.
Remixed Dust collector for Bosch GKF 12V-8 Added fifth hole to mount and increased height of second part to 10mm PETG 100% infil print with supports
This router base for the GKF18V-8 gets you a two hand operation of the router for more control when chamfering your workpieces. Furthermore you get a swiveling dust catcher, so the chips that are flying from the router bit get stoped and…
This model was heavily inspired by the Bosch GKF 18V-8 trim router base by woelpi. I made my own, simplified version of it. I skipped the dust collection bits and made the handle a separate part that comes with a hole in the bottom for a…
Scanned with a Creality Raptor Pro, cleaned up in Blender. Use as measurement reference for creating accessories etc. Model is manifold.
This adapter connects the small hose included in the ‘car detail kit’ that came with my cordless Shark vacuum cleaner to my Bosch GKF 12V-8 router. Print in TPU in the orientation show in the screenshot. M4x20 bolt required to fix to the…
There are several wall mounts already for the Bosch router but none that fitted my use. Either they were bulky, mounted the routed upside down or you needed to lower the bit before mounting. I use my routers for specific router bits and…
When printing out the original design, I found the slide to wobbly and not enough fixed. I just added 2 holes to original slide so you can use 2 screws to fix the slide and make it more stable.
This is an oversized square base for the Bosch Colt line of palm routers. The original base is circular an 106mm in diameter. This is square and 116.6mm for the purpose of being able to drop into machined pocket to build a router table…
I needed to cut the profile of the brackets into the edge of the wood for a floating shelf installation. With a 40mm gap in the center, that is how thick my shelf is, it allowed me to cut perfectly centered across the length of the shelf.…
Description This model is a circle router to be used with a Bosh GKF 12V-8. It uses a 12x12 mm extrusion for the arm. The minimum routing diameter is 240 mm and the maximum depends on the 12x12 mm extrusion length you use. This model is…
