80 models
Universal mount for D-Cell Maglites, designed for a Jeep Wrangler JK seat rail but could be mounting anywhere. Check out my video of installing it in my Jeep: Prints Flat No Support Printed in PETG for heat resistance and flexibility
I wasn't satisfied with the other available Maglite holders I found on Thingiverse, so I decided to design my own. It's a quick design made in Tinkercad, and with the settings I used it's a quick print as well. I was happy enough with the…
Picatinny Mount for 18mm diameter Mini Maglite This will fit a Mini Maglite or any other torch that has an 18mm battery tube. You will need M4 x 30mm Socket Cap Screws and M4 nuts (2 of each). Print Settings Printer: Cetus 3D Mk2 Rafts:…
HINT Print this vertically like the orientation in my wall-mounted photos. This will ensure optimum strength. If you print it with the flat side down - it will be much more prone to breaking. A holder for Maglite D-Cells that is strong…
Here is a simple belt holster for a Maglite flashlight. It is for one of the larger sized one with the 1 ½ inch (38.5mm) diameter handle. The Fusion 360 file is included if you want to try and edit the diameter for a different sized hole.…
Gridfinity for maglite mini - part of my 'Gridfinity Survival Kit' Collection
Logos for Maglite, Kärcher, Troy-Bilt and Ridgid Flames decal. The Maglite logo looks nice with glow-in-the-dark filament for the white lettering! Let me know if you're looking for a particular logo and I'll try and get it for you.
When my dad gets his Maglite from behind the cabinet, he usually tips it over. So I designed a sideways Maglite Holder for him and a straight one for myself. It is designed for a D battery Maglite (39.4 mm in diameter) and holds my LED…
Turn your childhood dream, the classic Maglite 4D, into a modern high-power LED flashlight! This 3D-printed adapter allows you to replace the four heavy and expensive D-cells with three powerful, rechargeable 18650 Li-ion batteries.…
Li-ion safety warning For use with “ protected ” li-ion cells only. Unprotected cells can be discharged too much making them hazardous when re-charged. Older Maglites are sealed tubes with rubber o-rings at each end. In the worst-case…
I couldn't find a holder to fit my maglite mini for the honeycomb storage wall, so I made my own. It was a bit tricky to figure out how to merge the mesh and solid model but I think I did it right, and even added a small fillet between…
This allows a 3x D-cell 4.5v series device to use 2x 18650 batteries at 7.5v DO NOT USE WITH A 4.5V (3 cell) BULB. It will immediately burn out unless the 18650 batteries are quite low to make 5v. I found a "4,5,6 Cell" LED kit at a yard…
No matter if your house catches fire, or your wife wants you to bring out the garbage at 3am, in emergency cases a flashlight allways comes in handy. But searching for your flashlight in the dark, can cost you that few seconds, that…
Wall mount for maglite with C cell batteries. Category: Organization
A quick attachment to carry a mini maglite on a Nerf Modulus- the AAA version. Category: Toy & Game Accessories
Quick remix to add an additional mounting hole to stop it spinning
Added a small chamfered recess at one end to ease getting the torch out of the box. Just press down so the torch pops u.
Small holder to hang your mini-maglite (18mm shaft) on a wall etc. Use 3mm or smaller screws to attach. Print Settings Rafts: Doesn't Matter Supports: No Category: Tool Holders & Boxes
tested with NiteCore MT26 and Triban RC120 bike lamp diameter : 25.4mm handlebar diameter : 32mm printed with PETG screws : 2x M4x40, 1x M3x35, 4x M4x12 + 4 nuts
I drew a diffuser for Mini Maglite which gives a good spread of light in the dark. Fits lamps with a diameter of 25.4mm (1 inch). Printed in transparent filament with 15% infill (Gyroid) to get nice light scattering. The diffuser has an…
Ever put down your Maglite only to have it slowly start to roll away? Well, no more! This comes with two pieces, a front bezel mount and a rear mount. Using the rear mount would probably preclude easily sliding the light into a pocket or…
Adjustment With the FreeCAD document you should be able to adjust the length, hight and screw clearance. You can also choose between D and C cell models. You can adjust the values in spreadsheet and hit enter to update the model. Hardware…
Whenever I drop my maglite flashlight it makes a horrible noise, breaks something, or dents it. Make the end of the handle a bit softer.
Stable wall mount for Maglite 3 D-Cell flashlight. The design is designed so that you can grab the lamp easily and quickly when it is hung. The lamp can be removed directly to the front. The mounting holes are designed for 4x40mm…
A simple cradle to hold your maglite on the wall. Easy to print with no supports.
Belt holder for the D-cell Maglite flashlights. Print the design twice and glue the pieces together. User a piec of scrap belt and sew it as a loop to the holder. Make sure to make the loop big enough enabling your waistbelt to pass…
I created this extremely simple print several years ago when I needed to look into my son's eye to inspect his intraoccqular lens (IOL) that had become dislocated. This items makes a mini maglite produce a very narrow beam that should…
This is a mount to attach a mini maglite to a gopro mount. There are two versions, one has a 10mm extension between the two attachment points, the other is flush. The inner diameter of the maglite clamp is 18mm. The screws I used on the…
.2mm layer height Supports required. Recommend PETG
Soporte para cinturón hecho para la Maglite ML300L 2D. Belt clip made for Maglite 2D ML300L. Print instructions Category: Gadgets Summary Soporte para cinturón hecho para la Maglite ML300L 2D. Belt clip made for Maglite 2D ML300L. Print…
IKEA SKADIS Maglite (C-Cell) mount. Can be printed without supports. The (base) hook slides into the back of the mount. Category: Tools
Simple mini maglite holder for honeycomb storage wall (HSW)
This is a practical footstand for the Mini Maglite. Fits flashlights with a width of 18 mm (0.71 inches). The base is 35mm (1.38 inches). Fits with Mini Maglight Diffuser which you can find here.…
This is an easy to print holder for Maglite D-Cell flashlights. Two holes (d=5mm) are included to screw it to whatever you want.
Remix of https://www.thingiverse.com/thing:1747635 for mounting on System 32 shelf pin hole rows (5mm holes at 32mm distance) as used in a lot of commercial furniture (e.g. IKEA). Category: Organization
Convert a 2x AA battery Maglite into a freestanding starship, shining downwards to light up the shock diamonds in its rocket flame. If you have a 2xAAA battery Maglite then please see my slightly smaller version of this design. Print…
This is a replacement for a switch in Maglite flashlight that had only a hole instead of the original switch mechanism. It is composed of three files: Pin - inserted into the hole and fixed by bushing to not fall out Bushing - fixed on…
I wanted to make a mount for the Maglite ML300LX Flashlight just for fun. Parts needed: 1x 35mm m3 bolt, 1x m3 nut, 2x Standard Zip Ties, 1x Maglite ML300LX flashlight. I would print 2 because the flashlight is very heavy. Printer I used…
Convert a 2x AAA battery Maglite into a freestanding starship, shining downwards to light up the shock diamonds in its rocket flame. If you have a 2xAA battery Maglite then please see my slightly larger version of this design. Print…
Improvements on the holder by Dutch_174282. I've added sizes for MagLite AA (18mm) and D (40mm) sizes. Also NEBO / LilLarry (16mm) and 58mm flashlights. The mounts are narrower and I've include versions both with and without screw holes.…
Maglight holder for: Mini maglite AA ML300L D-Cell Infill 30% PLA
I printed it using TPU in a vertical postion with a brim.
This is a 98mm long diffuser for the Maglite D-cell (and most others that have a 57mm/2.25inch head). It fits 18mm over the top of the head (securing a good fit), giving 80mm of diffuser space (see picture). Print in vase mode, as…
Holds a flashlight on the belt. Fits a belt 40mm high and 10mm or 5mm in thickness. I recommend a support for the loop.
Wall mount your favorite Maglite C cell flashlight! Strong and durable. Your Maglite is now waiting for you.
Here's the problem with Maglites: they last a lifetime - contrary to the batteries you put into them. As i recently discovered, cheapo D-cell batteries definitely have a lifetime much shorter than Maglites. Not 25 years (which is roughly…
Print without supports. At least 3 walls for enough strength.
The original material that holds the torch in place in the case was cracked, this is a replacement
Normally, the light from this torch is concentrated and quite focused. With this diffuser, it will become scattered and more like light from a lantern. The new Mini MagLite is with an installed LED. These new types of flashlights have two…
My Mini Maglite LED Pro+ didn't fit quite right in @SteveW91's model, so I elongated the depression for the flashlight which forced the overall size into a 1x5 gridfinity bin.
wall bracket for the big Maglite
Mini Maglite Holster Features: Full body enclosure (sink model below the build plate for a shorter enclosure) Integrated catch to keep the Maglite inside (Demo: https://youtu.be/Ymsswnr9_-4 ) Clip for hanging on belt or pants Thumbhole to…
Well ... this is a thing I suppose. Needed a holder for couple of trimmers and a Maglite Mini. It has mounting holes for three 3mm countersunk wood screws. I mounted mine on an Ikea wall cabinet door to stop these bloody things from…
All you have to do is cut a ring or two off the big side of the spring, polish the inside of the cap with a dremel and wire brush or sandpaper so said spring makes good contact, then buy whatever 3-5W LED maglite bulbs you want for cheap…
Maglite Mini 2 x AAA flashlight holder using magnet or command strips or screw. Magnet print sized for a "25lb Magnetic Hook" replace the hook with a M4 x 8mm screw and washer. Includes versions for mounting with two poster command strips…
I have printed these in multiple different materials, but I have found ASA works the best. Carbon or glass-filled nylon would be the most durable, but can be kind of abrasive on your pocket. These only use a few grams of filament, so…
Tone down your super bright Magnate Solitaire for when you need it to write in the car. Now you won't be blinded when illuminated your writing surface. Save your retinas.
Here are all the parts I used to convert this flashlight to lithium, and from Halogen to LED. Print the above spacer. Print 5 of these 18650 to Dcell form factor adaptors by isquared :…
All instructions on my Instructable post : https://www.instructables.com/Yet-Another-DIY-Maglite-USB-Rechargeable-18650-Cel/ After looking online for a solution to upgrade my MagLite, i found this post…
I created this model to hold my "AA" battery size Mini Maglite. I needed a simplistic one piece design that would stick vertically to a flat surface with double-sided tape. It slides in an out very easily. Hope you find it useful. 19mm…
Updated version of the my Mag-Lite ML25 LT case. On the pictures V2 is in black and V1 in red. V2 description: The new model is an original model designed to be printed without supports, in FLEX filament. It should also work in PLA or any…
Simple Maglite holder on Metal Rack, Hex nut 13mm and Hex bolt
This Maglite Mount fixes a Maglite Type D (2D, 3D, 4D, 5D or 6D) with the Head of the Light protected. The Mount can be screwed or glued to a surface, like i.e. into a car or on a desk.
I got tired of my Maglite Mini rolling off my table, so I made this endcap with flat sides to stop it. The endcap slides over the back of the flashlight. There is a hole for a piece of filament to slide through the lanyard hole to lock…
I keep my Maglite on the floor next to the drivers seat. It tends to want to jump out of the truck whenever I park on an angled driveway. I saw Jason H's Maglite D-cell TPU base and wanted one for my flashlight. I printed it and found it…
The Mini Mag-lite flashlight that I designed this mount for is model number P32012. It is the LED version (100 Lumens) powered by two AAA batteries. The mount is secured with (2) M3x25mm hex head screws which work well (m3x30mm screws are…
The original model was too good at gripping the flashlight and broke every 2-3 time removing the flashlight from it. Scaled up to 102% and cut off some of the curve of bracket. You still get a snug fit without worrying that you will break…
Gel holder for Mini Maglite and Duracell 350 led , Design to help with light painting photography, made to be used with gels of 45mmx75mm. Everything is snap fitting no glue is needed. Category: Camera
Restricts the light for up close work. Careful not to get it stuck on.
Works for Astrolux EC06 or Sofirn Q8 Plus in combination with a Maglite diffuser cone (meant for C and D type flashlights). Material: PETG (preferably transparant) Low Quality (0.28 mm layer height) Wall count: 4 (no infill) I've tested…
Currently scaled for the Hilngav clone from amazon. You'll have to scale it for your application. You want a snug fit.
A easy to print key chain for the Maglite Solitaire LED. I'm not sure if the not LED version has the same dimensions. To be printed in TPU or other flexible filament. No supports needed.
I've printed this in PETG, there was a little shrinkage on the battery holes so I've also uploaded one with more generous sizing (Torch Rack 2) Please note, the cats in the photos are not included.
Maglite Mini 2 x AAA flashlight holder using magnet or command strips or screw. Magnet print sized for a "25lb Magnetic Hook" replace the hook with a M4 x 8mm screw and washer. Includes versions for mounting with two poster command strips…
A easy to print key chain for the Maglite Solitaire LED. I'm not sure if the not LED version has the same dimensions. To be printed in TPU or other flexible filament. No supports needed.
I created this model to hold my "AA" battery size Mini Maglite. I needed a simplistic one piece design that would stick vertically to a flat surface with double-sided tape. It slides in an out very easily. Hope you find it useful. 19mm…
Added a small chamfered recess at one end to ease getting the torch out of the box. Just press down so the torch pops u.
This is a replacement for a switch in Maglite flashlight that had only a hole instead of the original switch mechanism. It is composed of three files: Pin - inserted into the hole and fixed by bushing to not fall out Bushing - fixed on…
