Counting matching models…
GOEWS website https://goews.ws/ GOEWS Reddit Group https://www.reddit.com/r/GOEWS/ The Greatly Over Engineered Wall System (GOEWS) is a modular storage solution combining the flexibility of the Gridfinity system with a durable, modern…
pieces to finish off the install if you want straight edges adds 7mm all around the Tile size uses #6 screws to attach to wall
Small Parts Bins 1x and 2x Wide to hang on GOEWS, great for small part storage Internal Hole to opt secure mounting. uses GOEWS hangers Added version with Gridfinity bases integrated, if you are not stacking bins
Added GOEWS wall bracket to closing latch! The latch is 12mm tall and is designed to hold a 22mm object. It was generated from the OpenSCAD file in the original post. Used #6-½" screws to assemble.
Added Battery Holders for Porter Cable 20V, DeWalt 20V, DeWalt 20VXR and Craftsman 20V. Note the DeWalt 20V is a bit improved and can actually work fine with the Porter Cable 20V and the DeWalt 20VXR. The Craftsman is on its own. Print…
THIS IS THE OLD VERSION. WITH A 42MM vertical spacing A new version has 36.373mm spacing that better matches the Hex spacing that is called GOEWS GRID. A Square configuration of the GOEWS system. 42mm spacing vertically and horizontally…
A shelf to hold Gridfinity accessories at a 45 degree angle front and back extensions, added so it doesn't fall out
Skeletonized Gridfinity bases for the GOEWS Wall System . These bases try to minimize material use at the cost of some rigidity. They are ideal for lighter bins, though if you are willing to accept some flex you can absolutely store bins…
Wall mounted organizer for screwdrivers, pens and similar tools Best print with 0.6 mm wide perimeters
Drill holder from here https://makerworld.com/en/models/431546#profileId-402130 You can find the rest of my parts for GOEWS over on MakerWorld at https://makerworld.com/en/collections/3657755
This is a rebuild of GOEWS in OpenSCAD to allow for easy generation and customization of parts. It requires the BOSL2 library. It also introduces a variant with thicker cleats which improves the weight capacity of the tiles by 60%. An…
I share a base in solidworks and step file that you can customize easily
GOEWS Dewalt 20v battery holder to work with GOEWS https://www.printables.com/model/1090032-goews-gridfinity-over-engineered-wall-system
If you need to Hold a GOEWS Tile on your Gridfinity grid. this will do it.. attaches with GOEWS Bolts, 12mm or with 16mm if your also attaching a Plate to the GOEWS Tile untested
New Support arm and modular tube for hanging Filament. 1KG spools Recommend you use Bolts to secure them, just incase Untested design also works with GOEWS Shelf Support Brace parts if needed Rods 1x works for single spool (84mm space for…
4-wide shelf 10 bits per section for 40 total
Adapted for Large 3M Command Strips two versions. hang below or Hang Above Secure with Bolt if desired
made hanging rack for different sizes of small paint bottles 27mm,35mm,40mm,30mm,25mm if your bottle is 25mm wide.. use 27mm.. leave a gap sizes listed are the inner hole size
adjusted to have 3 rods holders. so you can hang from middle or add inner and outer Rods for stacking.
GOEWS Pegboard Adapter Single Plate 1" standard pegboard
GOEWS - Vertical Gridfinity Feet and Handle Holds two GOEWS Tiles back to back. vertically. Works with GOEWS Hex and Grid Tiles Required two tiles back to back standard 9mm Bolts needed
As described above, I only slightly altered the original design here. OP, you can add this to your library if you like. FIXED: I put the insert for the wrench too deep and it kept breaking the threads. This version is thinner but you get…
expandable trays to fit your needs. For the mid you can use the screws to make it more ridged. Print Left and right ends x 1 and as many Mids as you need to fill the gap. the trays are 60mm deep x 35mm tall please leave ⭐ review and rate.…
hold 5 build plates on GOEWS
GOEWS Ryobi Battery Mount This model modified the Ryobi battery holder originally designed by @Jerrari to fit the GOEWS wall system. Supported Bolt The 9mm bolt is included in the files because it is the only one with supported length and…
GOEWS is the perfect gridfinity solution for heavy weight requirements. openGrid is also gridfinity compatible, but tries to make things “living room compatible”. Getting the GOEWS thread hole onto your openGrid board allows you to use…
GOEWS Milwaukee M18 Battery Holder to work with GOEWS https://www.printables.com/model/1090032-goews-gridfinity-over-engineered-wall-system untested
Generic connectors to hang your bins/shelves or anything else to your GOEWS wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and allows for fast…
A simple holder for different size pliers.
Compact holder for my medium size hammers
Straight GOEWS Strip with custom hanger and HD bolt
Update: hanging plate blanks added. A simple version of the GOEWS tile in FreeCAD so that people who use FreeCAD instead of Fusion360 can participate and use it. Includes files for a single or tiled hexes, and also for hanging plate…
Built for GOEWS - Greatly Over Engineered Wall System by MrExo3D using Fusion and MrExo3Ds spec drawings learn more about GOEWS on the website
Created a holder to keep my pick sets organized (and not stabbing me from my toolbox). Fairly common to have on hand for cleaning up 3d prints. The curved shape matches that of the Husky brand pick set and holds them in place well. The…
Check orientation before printing, at least one is upside down right now, still WIP Updates 2024-12-08 Updated hook to spec, earlier models were tight and felt more “snap to fit” Moved old files to “Previous” Some bins with screw holes…
A great way to store Lenses on your wall for Mounting DSLR lenses onto GOEWS Various mounts ranging from internal diameter of 70mm to 120mm also set to accommodate a Rear Cap thats up to 60mm Diameter Add GOEWS Bolts for extra security…
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
Remixed into a single-row version, available in various sizes. Surprisingly, this didn’t seem to exist already — and I needed it! Often, I only require a 1-row layout for items, and printing more just felt unnecessarily wasteful. Enjoy!
GOEWS Ryobi Tool Mount This model modified the Ryobi tool hanger originally designed by @Jerrari to fit the GOEWS wall system. Supported Bolt The 9mm bolt is included in the files because it is the only supported length due to clearance…
This is a 10-inch rack using GOEWS tiles as the side panels, providing good rigidity while allowing for GOEWS accessories to be mounted. Accessories can be used for storage, cable management, and even attachment of devices such as…
I found this m18 battery holder and thought it was pretty sweet, I removed the wallmount screw holes and added GOEWS hangers to it, so now I can use it with my favorite wall organizers. Figured it was worth the share. ENJOY
I merged the finishing corners and sides with the GOEWS 4x3 mini bed plate (180x180mm max.) that makes 8 different plates for a nice finish and saves screws
This will allow you to mount the GOEWS frame to a wall without screws or anchors. Each claw can hold 15lbs. I added a circle cut under the rectangle cut so you can twist lock it. The fit is a bit too tight, but it's a first draft.
I took a cable clip generator created by plugowski and added a GOEWS bolt to it to secure some cabling on my GOEWS wall.
Remix of @ripley’s Honeycomb Storage Wall – Wolfbox Air Duster Storage to fit the GOEWS mounting system. This GOEWS Wolfbox MF100 Holder keeps the same form-fitting cradle for the Wolfbox MF100 air duster but swaps in 2x vertical GOEWS…
GOEWS Mount Hercules 20v Battery Holder with retention lock by utilizing the batteries built in tab lock system. Remixed from this Dewalt model: https://www.printables.com/model/492142-dewalt-battery-holder
Description I'd seen some people express a concern that the top row of a GOEWS grid was not anchored at the top and would start to pull away under load. I realized that a very simple solution would be to create a grub screw that had the…
This is a VESA mount for GOEWS allowing mounting of monitors and mini PCs on GOEWS walls. Unlike other wall systems, GOEWS is strong enough to easily handle things like monitors. With this mount installed you can simply pick up the…
Designed to hold items with a euroslot tab. A 5° upward tilt was added and helps prevent items from sliding forward when placed — this works very effectively. A non-tilted version is also included, though it's not recommended. For added…
A remix of jimmybish's HSW Ryobi Battery Holder. Tested on OpenGrid but it should find a home on all Multiconnect compatible wall systems. I was unaware there were existing solutions for OpenGrid at the time of design, but I don't like…
Updates 2025-01-29 reduced profile, slimmer / better edge / faster print recommend PETG but PLA works fine 2024-12-22 sharper 2024-12-14 Heard you guys liked scraping so I put some more scraper on your scraper, added additional edges to…
Would not recommend printing by itself, but if my GOEWS friendly bed scraper isn't for you-- slap this bad boy on your favorite one and go to town Hang your flexible minions by the tail, rest your collapsable sword upon the hexagonal…
Simple double combination square mount for the GOEWS system. Couldn't figure out how to add clearance for the screw locks without too much complexity, but I don't think it needs it. If you orient the print well, it should not need any…
GOEWS Milwaukee M12 Tool Mount (Remix) Dock your Milwaukee M12 tools with one hand and reclaim wall space with a mount tailored for the GOEWS system. This remix adapts a proven M12 tool holder to the GOEWS hanger style, so it snaps into…
This remix adapts the multimeter holder originally designed by @createminds as remixed by @SorenTSwede for those of us in the GOEWS cult. This version attaches using 2× horizontal GOEWS cleats , and the debossed “multimeter” text on the…
Stronger version of my pegboard adapter adjusted for the very cool GOEWS Wall System. Should not need supports if printed vertically, can be printed in anything
I love GOEWS - Greatly Over Engineered Wall System by MrExo3D -and wanted to put it everywher- and love my 5mpro, so I built this one. It is a nice snug fit, and is a handy place to keep your GOEWS Hanging Bed Scraper
Hang your hooks and hex from your X1C, it's a very snug fit and will likely only fit on one side of a stock X1C A great place to put your hanging bed scraper or display your legally permissible nautical benchmarks Print on its side with…
Store your iFixit Mako kit on your GOEWS wall for easy access and location. Slides right in!
This is a remix of one I found that is meant to be screwed to the wall. It is easy to insert and remove and very strong.
Overview This is a collection of connectors to hook items from the Underware cable organizing system to GOEWS boards. This first set is for the larger Multiconnect based items. (these versions were done from scratch, and actually from…
Needed somethign to hang earring cards on to hold my stock, could have used a peg hook adapter, but didn't have pegs, so made one.
Heres a paint shelf I made to work with Goews system. I printed in pla 2 walls 10% support cubic infill. ENJOY
Printed in Sunlu High Speed Matte Black in one piece using a Core One L.
Just remixed to use the GOEWS mounting system
GOEWS addon for adding stickers, print large face down, no supports needed.
Introducing the GOEWS remix of the very functional Elgato Keylight Air Wall Mount. Reclaim your desk space and put light where it belongs: ON YOUR WALLS. Nobody puts baby in a corner, but you can put you Keylights wherever you can mount…
Just a simple GOEWS configured holder. make sure you print on its side. No supports needed.
Stow your Incra V27 exactly where you cut. This slide-in GOEWS dock cradles the miter head and supports the bar so it won’t sway, scrape, or chew up your wall. Mount it beside the table saw or outfeed so you can park the gauge when not in…
With this setup you can create a GOEWS wall on the side of your Bambu X1C printer. To recrate my setup, you will need to print the following: 2 x GOEWS_X1c_hanger_top 2 x GOEWS_X1c_hanger_bottom 2 x GOEWS Tile 6x3.stl 2 x GOEWS Tile…
Anything GOEWS allows you to take any STL model and turn it into a GOEWS accessory. Try it online at https://anything.goews.ws or load it into OpenSCAD locally. How to use In either the web or OpenSCAD interface select the model you want…
This can be printed with basic settings, I did it on a p1s. .2mm layer height 15% infill no supports pla
This can be printed with basic settings, I did it on a p1s. .2mm layer height 15% infill no supports pla
It's a little tight on the cable, would be neater if there was enough room to route the rear cable down, but it would need to come out a lot further to do so. Fit is great - just tight enough to hold the rubber pad securely, printing is a…
GOEWS-mounted drawers sized to the GOEWS grid. Each housing is exactly 3 GOEWS squares wide (125.5 mm) and 2 GOEWS rows tall per drawer, so you can mix 1x, 2x and 3x units and they line up edge to edge with the rest of your wall. The back…
This is a simple hanger for a measuring tape with a hook to hang off. Made for GOEWS. No supports needed. 42 mm opening ( 1-5/8")
Milwaukee M12 installer plate and chuck holder built for the GOEWS wall system. Included parts: the installer plate (about 48 x 103 x 46 mm) and the chuck holder (about 212 x 63 x 30 mm). STL and STEP files are included, plus a Bambu…
A GOEWS filament rack using the new thicker cleat system instead of the original one. The files include a .scad for the bar, along with .stl s for the two lengths I most commonly use. I'd have included the scad of the actual rack too, but…
This is a 4-piece holder for the Ryobi USB 4V batteries that I have modified to work with the GOEWs wall organization.
Ryobi Link rail for GOEWS boards. Fits larger tools well, doesn't seem to fit smaller items (like drill bit boxes) as cleanly.
Replace the pegboard mount for a GOEWS tab, prints fine with supports in either PLA or PETG, can be used with or without the standard supporting screw
This is a 10-inch rack using GOEWS tiles as the side panels, providing good rigidity while allowing for GOEWS accessories to be mounted. Accessories can be used for storage, cable management, and even attachment of devices such as…
A remix of jimmybish's HSW Ryobi Battery Holder. Tested on OpenGrid but it should find a home on all Multiconnect compatible wall systems. I was unaware there were existing solutions for OpenGrid at the time of design, but I don't like…
Heres a paint shelf I made to work with Goews system. I printed in pla 2 walls 10% support cubic infill. ENJOY
I found this m18 battery holder and thought it was pretty sweet, I removed the wallmount screw holes and added GOEWS hangers to it, so now I can use it with my favorite wall organizers. Figured it was worth the share. ENJOY
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
It's a little tight on the cable, would be neater if there was enough room to route the rear cable down, but it would need to come out a lot further to do so. Fit is great - just tight enough to hold the rubber pad securely, printing is a…
Printed in Sunlu High Speed Matte Black in one piece using a Core One L.
Three sizes included, standard, large and HUGE Write your name! DRAW PICTURES!!!
benchy goews home Updates 2024-12-21 - removed goofy wall things is not as difficult to print added suspended benchy added slim flat display
save some desk/drawer/grid space and hang them bearings on your GOWES wall
Customize your tilt bins with these handy print-in-place tactile labels. You can introduce a pause and filament change or use one of them Ayumesess to add even more pop .
Simple holes allow screwdrivers to tip over sideways. These are 1" long, minimizing the amount of tipping. Four sizes for a variety of screwdriver sizes
The picture with side-by-side hooks shows the original on the right (for comparison) and this remix on the left
