1 / 3
GOEWS bambu X1c Side wall mount kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This kit allows you to mount GOEWS system on the side of Bambu X1C printer. it consists 2 hanger piece and a connector
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 8
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this setup you can create a GOEWS wall on the side of your Bambu X1C printer.
To recrate my setup, you will need to print the following:
- 2 x GOEWS_X1c_hanger_top
- 2 x GOEWS_X1c_hanger_bottom
- 2 x GOEWS Tile 6x3.stl
- 2 x GOEWS Tile 6x5.stl ( from GOEWS page )
- 8 x GOEWS Bolt Parametric HD 9mm (from GOEWS page)
To assemble:
- use the connector piece to join the 4 tiles into a 8 x 12 tile GOEWS setup
- connect the bottom clip to the bottom most tile
- hook the bottom hanger lip to the bottom side of X1c side wall, and apply upward force to keep it from falling
- place the top hanger lip over the side aluminum panel, and line up the hole to the GOEWS tile, secure it with bolts
- You now have a 8 x 12 tile GOEWS on the X1c side wall. Hang whatever you want!