Counting matching models…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
Protractor made with all printed parts, no supports. The numbers and graduations are raised, ideal for 2 colour prints. I did mine by performing a colour change for the last two layers. I found similar models both here and on Thingiverse,…
This goniometer allows to accurately measure outside angles and rounded corners (fillets) of objects. With a regular protractor this is hard to do, especially for rounded corners. I designed and printed this to measure the angles and the…
My take on a laser goniometer for measuring the edge angles on your knives. It's made to hold a pen style laser pointer with a diameter of 10mm.
This model is a Laser Knife Goniometer used to find the precise angle of knife bevels. The knife is held by magnets below the edge and two additional magnets in the tilt mechanism. Tilt mechanism with a knob on the side enables adjusting…
Small goniometer for medical use. Printed in PETG without supports. Best results with 0,15 layer height. ⚠️ Enable Advanced print settings > Layers and perimeters > Quality > Detect thin walls. The two parts have to be carefully separated…
english (google translate)/spanish I have no idea about motors, but a friend asked me to make this piece for him and he has given me permission to hang it. This is what he told me about her: Goniometer for 2T and 49 cc motorcycles: am6,…
A portable laser goniometer to accurately measure your knife edge angles. It uses a cheap 12mm focussed laser that you can find everywhere :…
The goniometer is used to measure angles of motion for limbs and appendages. The tool features easy-to-read 340 degree measurement. Filament color can be swapped at the numbers to make it easier to see.
This design is a printed out of plane rotational stage (i.e goniometric stage) capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it uses 8 693ZZ and two MR95-zz ball bearings, one M5 and various M3…
The laser monter of the original modell is special for the athors laser. The remixed mounter is compatible with the most common 14 mm diameter laser pointers. It is easy to modify in the Fusion 360 file.
This is a simply protractor for measure internal angle. Print instructions I have used HIPS for obtain low stringing. The nozzle must have a diameter equal or less than 0,4mm.
https://www.amazon.com/BikeFit-7010102-Bike-Fit-Goniometer/dp/B004WNAI6M/ref=cm_cd_al_qh_dp_t $60 for a piece of plastic with no genuine ingenuity behind it. Note the total length is 47 cm; this will not fit on most standard print beds.…
The printout is reduced in comparizon to the original size, but can be enlarged to the desired size at any time using the Prusa Slicer. Don't forget to enlarge all parts at the same time We recommend PLA or PETG Slicing resolution for…
Building PLA, PETG, etc No supports 15% infill Built for a pen laser pointer with a 11.2 mm diameter shaft Usage Place the blade of the knife between the triangles, the laser bounces off the bevels onto the angle markers The main dot…
Protractor (or goniometer) which can be used by blind users because of the tactile elements. model is also on Tactiles.eu, a database with 3D models specifically for people with vision impairment.…
This is a useful 30 cm foldable meter with a little goniometer in the center, it needs a M3 screw and nut to be assembled. It can be used at the office or at school and it can be stored in a pencil case when folded.
K čemu model slouží? Tento nástroj – nebo spíše pomůcka – znázorňuje pohyb bodu po jednotkové kružnici a umožňuje nakreslit funkci sin, resp. cos. Má pomoci pochopit princip, co vlastně funkce sin a cos představuje. Je důležité říci, že…
Remix of @MGyula and Sarusani
This tool allow you to measure the surface energy or wetting/adhesion of solids. Bill of Materials 40-1000x USB Microscope (Required) Rechargeable LED Light Panel (Required) .5-10μl Micro Pipette (Required) 10μl Micro Pipette Tips…
This project arose from the need to build a hail shelter for the car With simple string, 4 steel pins and the wire goniometer, measurements can be made with 1 degree accuracy. With the wire well stretched, simply insert the centre of the…
Foot Goniometer to mesure angle of foot for bikefitting, ie as in https://cdn.shopify.com/s/files/1/0613/5581/9190/files The dots increase in 5 degres, the row above is 2.5, 7.5, 12.5, the row below is 5, 10, 15 Assembly with two m4 bolts…
Four 5x2mm disc magnets can be glued in. Holds any combination of standard magnetic pin bases with caps and goniometer tool(s), e.g. the things needed for a source alignment (ylid, steel ball, pinhole).
Il goniometro può essere utilizzato per confrontare angoli in ambito geometrico. Inserendo un fermacampione è possibile utilizzarlo anche con le stecche articolabili.
I like to check where my gonio tool is before I hit play, just to prevent those career-threatening crunching noises. With this convenient magnetic holder I can keep in in my line of sight within the instrument. The stl is configured for a…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. Support needed!
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
Ho preso l'idea da ( https://www.printables.com/it/model/53479-goniometer ) e ho fatto alcune modifiche ho messo anche un pomello, la vite è M6x20 Lo condivido con la stessa licenza dell'originale Category: DIY
