Counting matching models…
Set of tools for your MINI 13 , LUCKY 13 , EASY 13 and DUMMY 13 Printable Jointed Figures. This set includes three groups of tools - basic household tools, kitchen utensils and garden tools: Basic tools (purple) Wrench Hammer Kitchen…
Load for freight car or goods wagon in scale 1:87 H0. Layer height: 0.2mm Support: No Print all pieces and glue it together. I printed it with white PLA. I primed and painted it with Vallejo Model Color. Directly printing in right color…
Pallet, palletized barrels, and a pallet crate that fit my forklift model . Though they could be scaled to fit any other forklift style print or toy as needed. Print as oriented with whatever your standard settings are. The bridges are…
A sturdy two wheel cart already loaded with pots and barrels, ready for market runs or midnight heists. Native size is 74 x 40 x 43 mm . Split for easy printing and painting: loaded bed with rails, twin shafts, yoke, axle block, two…
Hallo Ich habe ein Verladedepot / Lager / Güter-Bahnhof für die Modellbahn Spur N entworfen. Der Bahnhof kann an die eigenen Bedürfnisse angepasst werden. Ein Teil des Aufbaus kann nach den eigenen vorleiben gestaltet werden, die Pfosten…
Description I have created these wood loads for my Piko 95432 open goods wagons UIC type E (not included in the models). This Piko wagon has inside measurements length 87 mm, width 29 mm and height 15 mm. You can rescale the models to…
I have created four types of heavy load cargo for my Roco 6600016 heavy load wagons UIC type S (not included in the models). The cargoes are: - A 'Stork Superior' Diesel engine. The Superior 40C-LX-8 is the prime mover of the NS…
This is My design to replicate something like the Fidlock snap used in https://www.reddit.com/r/EVERGOODS/comments/16vg5vw/cpl24_mirror/ , until I got the money saved up to buy the actual Findlock Snap connectors. This is just a slide-on…
3D tokens for River of Gold board game representing three of the trade goods. Porcelain is modelled from the original game token silhouette. Rice bag is remixed from the sugar sack adding in the rice symbols from the game. Silk is cloth…
Boxes for the various goods in the game, in the shape of each of the goods used for ease of use. Fits in base insert.
The model is a replacement part if the steps on a Playmobil goods wagon are broken or missing. The geometry is slightly changed from the original Playmobil part for better printing without support (see 2nd photo). The SCAD file references…
Oh My Goods! This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. Made specifically to fit Photo and Craft Keeper 4x6 inch…
This is a two side 20x20x5 mm crate token for a boardgame.
Attach this to the bottom of items to help protect surfaces from damage. Use spray adhesive, glue, or VHB tape to affix to your item. I printed with TPU - 100% infill.
This is the first project I have uploaded here, so I don’t exactly have any instructions on printing it besides use lots of support material. If you want to use it for cosplay purposes, you probably want to scale it down to a…
This is a custom-designed Bobbie Goods 120 pcs holder, created for improved pen organization. Printed in PLA with 10% infill
Boxes for unsleeved playing cards for the tabletop game Sleeping Gods (base game). It was build to be used with the “Sleeping Gods Token Trays” from extrudedDuck .
5mm & 6mm Radius Corner Cutting Jigs with 1.1mm Alignment Tabs for Easy Cutting of Leather Goods (or Whatever) that I made because I often have to hand cut this 5mm radius and wanted to make it more efficient. Great Radius for Wallets and…
If your kids are like mine, they are hard on their stuff. This model replaces the clasp which broke at the little nub that locks it into the main shell. I made the model so that it can print flat, which means it won't quite match the…
I designed this container to hold all cards for the base game & two expansions of Oh My Goods!, allowing enough space for all the cards you regularly use (those in the main and event card decks) to be sleeved. While I created this file…
Box with dividers to store and easily setup “Oh My Goods!”. It has enough space to fit the two expansions too. The grooves on the box are so that elastic bands can be used to keep it closed without bulging the profile. If you have any…
Simple flour scoop requires no support. No holes to make washing difficult. Print with 3 walls, 10% infill, 2 bottom layers and 4 top layers for best cosmetic look. Print Settings Printer: ANET A-8 Rafts: No Supports: No Resolution: .2mm…
Paper ship was not enough for me, and i believe neither were you. You can load dummy goods onto the ship according to the number of players. Print the dummy goods in colors different from the crops.(I Used transparent fillament ) Need no…
Holds 1mm strap. Meant for Alpaka Tech Case strap for example. V1 are for different style of opening, you can test those if have bigger than 1mm thick strap. Models in picture are printed with ASA.
Since the 3D printed tokens did not remotely fit in the existing insert here's a remix. The koku tokens are kept in a separate tray that replaces the big spacer. Model here .
This is a knurled pot to fit the Self-Watering Planter by parallelgoods Category: Outdoor & Garden
Solid funnel to avoid spreading goods all over the place while pouring Cerial, Coffebeans, Cornflakes into storage boxes. Use this solid goods funnel. Easy print no support. Recommend to use FDA certified filament like PET for printing.…
Halloween Challenge with kaika 参加用に制作したデータです。 内容は、 ・かぼちゃランタン(ダイソーのLEDキャンドルライト使用) ・かぼちゃランタン帽子 ・お菓子のようなカスタネット - テクダイヤ社長ver ・テクダイヤ社長カバー ・お菓子のようなカスタネット - kaika Logo ver かぼちゃランタン帽子は多色印刷ができるプリンターで色分けして出力してください。…
Can be used as a replacement lid for the Inomata-k “Dry Goods Storage Container 6.0”. If you don’t want to drill holes in the original lid (because it’s a hassle), you can easily drill holes in any desired position using a slicer. You can…
A tool for helping carry sheet goods (plywood, sheet steel) by hand and securing them in the back of a vehicle with a ratchet strap. The square outline on the side is to place a 2x4 between 2 hooks to keep them separated. I printed it in…
Just some simple factory goods tokens for the boardgame Arkwright. The second edition of the game came with 20 of these in colors matching the good (cutlery, kerosene lamps, bread, and shirts), so I just tried my best to mimic the designs…
I didn't like the old goods tile holder and didn't use the storage in the ExpTokens part . So I updated the model to hold the goods tiles.
I needed a place to store my Sandpaper I thought of using a desktop paper/file organizer. But most of them were two large so you get this. I used a hardboard as the shelf with a little JB Weld to stick the shelf into the uprigts. If you…
Seoul Housing and Urban Development Corporation is a specialized public corporation dedicated to enhancing citizens' residential stability and welfare. https://blog.naver.com/together_sh/223011268142 I have created NFC tag merchandise…
A compact stand featuring two bottle slots at different heights and a separate compartment for dry goods, such as baking soda or citric acid. The ribbed base helps with drainage. Designed for the typical 450ml 67x67mm push-type foaming…
This detailed model captures the utilitarian charm of a classic station goods annex. It is inspired by real-world freight structures found in historic railway yards. Use supports for the best print quality on this design. Size as…
This piece slots into the compartment where there's normally plastic panel to help with backback rigidity. I don't use the plastic panel and havent tested this with it. Put the wedge in so that the rounded part is against the bottom of…
Here is my entry for the 10 for Elegoods Contest! It's an astronaut standing on the moon, with its Centauri Carbon head, ELEGOO logo eyes, it's planting its flag in dominance of the 3D printing market. On the pedestal is ELEGOO's famous…
I personaly made this design for my family to use. After a good feedback I desided to share it in internet. There is also an empty box for everyday use and remixes.
Wall Display stand for otaku goods(acrylic stand, Can Badge, Key holder..) it works with 3T acrylic stand use organic support, u can mout to wall with hole or 6x3(2ea) magnet
This detailed freight yard structure features a classic goods shed design with a functional loading dock. Inspired by traditional railway logistics hubs, it captures the industrial essence of historical transport networks. For best…
The organizer for Ra deluxe edition by RawFrenzy is amazing, but I really wanted the points arranged linearly in order for easier discovery and sorting. I can't print in multiple colors, but I included lids with labels for those who can.
This 3D-printable scale model captures the essence of a pioneer-era covered goods wagon with a charming curved roof and small wooden van aesthetic. Inspired by historical freight wagons, it features a single sliding door for authentic…
I designed the sides of boxes. Now it looks more sexy from the side
I created this display to be able to use the goods tokens more easily and organized way. You can store the tokens in it all the time and use as an insert. If you have big enough build plate you can use the Goods_token_display_4x file to…
This piece slots into the compartment where there's normally plastic panel to help with backback rigidity. I don't use the plastic panel and havent tested this with it. Put the wedge in so that the rounded part is against the bottom of…
This is a Hibiscus Flower Emblem cut to fit the Self-Watering Planter by parallelgoods to be glued on. Print Settings Printer Brand: FlashForge Printer: Creator Pro Category: Outdoor & Garden
