Counting matching models…
Latest News: New Christmas Version! Print one of the vase option available here. Print the Christmas Lid available at this link: Santa Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 1. Introduction A vase, a…
Made a pingpong trophy as a present for a company. For the crown I used the model made by: mjmedien, https://www.thingiverse.com/thing:195852 and made it so it can hold a pingpongbat at an 5 degree angle. The slot where the bat sits in is…
1. Introduction This model is a lid specifically designed for my model of vase / pot / jack-o'-lantern with the face of Jack Skellington. Check here: Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 2.…
Made this for myself and turns out its very popular and would like to share it v2,v3,v4 are all works in progress but very close to being final. Print settings I printed it 20 % infill 3 bottom layers, 5-6 top layers depending on your…
A magpouch for AR-15 magazines to be used with my Moonbeam Mounting System! Attach to a belt, or quickly swap it over to another picatinny rail capable mounting spot! I personally keep mine on a wall mount made with my MMS collection.…
The MMS Stacked AR-15 Double Magpouch! Is the single magpouch just not enough, or you want to carry more mags on your belt? Here you are! Holds 2 AR-15 magazines in one module! Use with the MMS Heavy Belt Module and other MMS mounts for…
The 1911 Magpouch for the MMS Collection is here! A slightly thin, lower profile 1911 Magpouch to be utilized with the Moonbeam Mounting System Collection or your other picatinny rails if you're creative enough! Grab an MMS Belt Module…
This model is compatible with the lego system.
This Flagpole mount allows you to fly your colors without leaving the ground! It is designed to use inexpensive 1.25" Schedule 80 PVC pipe as a flagpole and attaches to a standard 1" RV ladder frame. You can pick up the pipe at Lowe's or…
This design handled my varied brands of pingpong paddles. When designing it was interesting to note the slight variations in paddles' backboard thickness, handle width/thickness, and curvature from handle to paddle. To accommodate for…
Specifically made to fit 1" diameter RV ladder and 2 5/16" diameter flagpole (Harbor Freight flagpole). Flagpole base is obviously for the bottom of the flagpole which clamps and supports the flagpole to prevent sliding. The clamps are…
A free spinning ring to attach to your flag and flagpole so it doesn't get tangled in the wind. Uses an M8 thread if you need a longer screw end.
Hracia plocha: 150 x 150 mm Hrúbka pinpongovej pálky: 6 mm Priemer trysky: 0,4 mm Výška vrstvy: 0,3 mm PLA, nožnice, sekundové lepidlo, staré poťahy Postup 1: Vytlačíme si pinpongovú pálku spolu s jednou rúčkou. Druhú časť rúčky prilepíme…
you can put the flagpole holder into the rail
Please use petg or abs or asa to print this. It stays outside and pla could become problematic. Use a block of wood and a mallet to drive this into the flagpole. The ribs will shear off and leave a perfect fit.
Model does not need supports. The model can be printed on a regular bed. For extra resistance against deformation, consider printing the part under the tube that inserts in the hole with solid infill. (see attached project file)
This spinning flag mount is designed to prevent your flag tangling around the pole. It's a fairly robust design intended for 25mm or 1" diameter poles - a screw is required to fix the parts in place. I prefer to use zipties to hold the…
This 3D printed Dogpool figure combines the adorable charm of a pug with Deadpool’s iconic costume details. Perfect as a collectible, desk decoration, or gift for Marvel and dog lovers. Designed for smooth FDM printing and easy painting.
Just print and glue the correct side of the stand to the ‘Kugelkopf’. The stand has a 2mm part to fit into the inlet of the ball head, the rest of the stand is conical. I just didn't want to waste filament for too much support and also…
A miniature version of a Swimmingpool i created for a friend to use as a Coupon case for a new REAL Pool XD
The MMS M1A Magpouch is here! This magpouch is for the box magazines the M1A/M14 uses! Make sure you grab the other things you need with this in the links below! Grab an MMS Belt Module For Warbelt Use! -=|MMS Belt Modules!|=-…
replaces the rings on most flagpoles that break. Print at .6 line width, 4 wall lines, 50% infill
Handy box for storing your squash, golf or ping pong balls. Because of its design you can have all balls stored together.
I've recently started DMing without a screen for my playgroups. My DM Screen had a nice wooden channel across the top of it so we could easily track initiative order via cards. Since I'm no longer using my screen, I wanted a visual way to…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Made for a 27.5mm diameter flagpole. Prints without support and uses an M5x12 or 16 BHCS with accompanying M5 nut.
Flag pole holder. Highly customizable OpenSCAD script. Use the OpenSCAD customizer to select options with sliders and buttons. Specify pole diameter, support size base size, thickness, mounting type, bolt and screw sizes, and other…
Flagpole knob done in Fusion360 from picture. Size D125 x H145 or resize in slicer Never printed it
I Made a nice FlagPole Swivel Mount ( ring ) Use only outside support, remove support then press the ring loose I made an extra swivel mount for the top, for a better movement FlagPole Swivel Mount Ø 30 mm inside 47 x 62 x 34 mm FlagPole…
Hello and welcome, this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.…
If you want a daily frog companion and you're also looking for a way to protect and carry your AirPods then you have come to the right place! This model allows you to convert your standard 1st Gen or v2 Gen AirPods into FrogPods. To make…
This flagpole holder is for 8mm pirate-flagpoles that I wanted to attach to the kids climbing frame in the garden. Two designs are available. One for screws with a diameter of 3,5mm and another one for screws with a diameter of 4mm. Print…
This desktop flagpole holds a single business card (standard 3.5" x 2" size) at the top of the pole, with additional card storage on the base. Prints well with PLA (only tested with eSUN glossy PLA), tight tolerance in the base/top pole…
This model is a flag holder for a 6 mm flagpole for a Woom 3 children's bicycle. The holder accommodates a 6 mm flagpole. I printed the part from ABS-GF. PETG was not stable enough for me. This is a flagholder for a 6 mm flagpole. It is…
For use with floater: Amazon Uses M3x6mm / M3x20mm hex bolts. The fogger has an optimal distance below the water that it works, this floating platform keeps it at that level no matter what the water level is at. Fogponics is an advanced…
We upgraded to a Philips SoniCare toothbrush and after that upgraded to two of them. So we needed a place where we could put them both and charge when necessary. Have Fun!
DE: Einfache Spitze für eine Fahnenstange (z.B. Alu Rundrohr: Durchmesser: 29,5mm, Stärke: 2,4mm aus dem Baumarkt). EN: Simple tip for a flagpole (e.g. aluminum round tube: diameter: 29.5mm, thickness: 2.4mm from the hardware store).
Füllung 20% @Schichthöhe 0,3mm ohne Stützen, ohne Rand
Este soporte compacto puede contener hasta tres pelotas de pingpong. Su diseño ergonómico garantiza estabilidad y fácil acceso durante el juego, mientras que su fabricación en PLA lo hace duradero y respetuoso con el medio ambiente. Ideal…
When I got my Netatmo wind gauge I immediately wanted to mount it. So I just drilled a hole in the standard top cap of my flagpole, put a screw in and put the wind gauge on top of it. This ‘solution’ worked for a while, but it looked…
use "voron bedpan" lower parts. i only made the bucket. Voron BedPan for Kinematic Bed Mount by TTR | Download free STL model | Printables.com im switching to beacon so the brass brush had to go. six 6mm x 3mm magnets are needed. my…
LED-PingPong Ball Video Wall inspired by bitluni's version -> https://www.youtube.com/watch?v=ikhZ34WgObc&list=WL&index=27&t=0s Thanks Bitluni! -> https://youtube.com/bitlunislab -> https://twitter.com/bitluni Using WS2811 LED chains…
Instructions Print with an outdoor-safe filament, like polycarbonate. Use a coarse gyroid infill and no solid bottom layers. Coat two rods of up to 3mm diameter with epoxy and insert them into the reinforcement channels. I used 3mm…
I have a double GPO/power point on an external wall in a courtyard at our home. Even though it's designed to be weatherproof, it's still VERY exposed to the sun and rain. In the interests of longevity, as well as protecting anything…
This is designed for a specific flag (manufacturer unknown) and is dimensioned to fit as a replacement for the weaker rings provided, which broke in the wind. It could be used for any pole with a diameter less than 1.5", and can be scaled…
As requested by a friend, this is the skull flagpole topper from Halo Infinite! Since the design of the original skull has a section that descends a fair way down the pole, I've cut it off part way as that was what was originally…
This is an addition for brimstone326s great Dice Tower with Secret Chamber for Dice Storage . I think it adds a nice touch and makes it easier to open and close the secret compartment. Print Settings Resolution: 0.2mm Notes: I had to use…
This a decorative flagpole end for 5/16 dowel
I have personally used that for at least 2 years. No problems, just use good flexible TPU for main body and strong plastic, like PC or PA for clamp.
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
Telescoping flagpoles require an additional Ring, to set the flag at half mast. Half mast is in honor of those that are well deserving of the tribute. This set includes 4 rings. S-39mm M-49mm L-57mm XL-65mm A retainment pin with cap is…
držák pingpongovích míčků na pingpongovém stole
Description Material: PLA/PETG Layer Height: 0.20 Infill % : 40 Supports: None Print Orientation: Default as modeled
This a prank power outlet. It is NOT a usable power source. No supports are needed. Use double sided tape on the back and stick on any random wall and watch the fun begin.
This highlights the fact that the Sea Scout Logo isn't symetrical, but I tweaked the inverse to fit the same shape as the front. The screw hole is the edited side, the front is the official logo. Screw needed is an M3 or equivalent. This…
Base or counterbalance for desklamp, magnifying glass, flagpole or something else you need a base for. I needed a desk lamp for a small corner desk, but most desk lamps were too small, too short or too expensive. Therefore, I purchased a…
Top and bottom swivels sets for use with 1" diameter flagpoles, with three example caps. Includes Fusion 360 source files (.fd3) and .stl files. The swivel set pieces are printed twice; once for the top of the flagpole to secure the top…
Modified the Christmas star to mount on top of my flagpole Christmas tree. I hollowed out the spires to contain LED lights and used a hollow dodecahedron as the core. The bottom piece is printed in two halves and contains a 1/2" bolt that…
So i printed the new Nevermore V6 carbon filter and it interfered with the kinematic bedmount. The simple solution was to print a 2mm spacer which does not protrude from the 2020 profile. Print with standard Voron settings (should result…
Used for this bike flag: https://www.amazon.com/gp/product/B0C6XHQXDX
A quick print for a temporary indoor or outdoor table tennis setup, the wooden plank slot is 24mm and the table slit up to 17,8mm, m8 screws clamps it to the table.
Ein den US-Warnschildern nachempfundenes Schild, das vor von Hunden verlegten Tretminen warnt. Druckt es am besten mit dem Gesicht nach unten, damit die Oberfläche glatter wird. Die Modelldatei hat eine Seitenlänge von 300 mm, die Ihr am…
Never install a magnet backwards again. MagPol – Magnet Polarity & Press Tool Working with magnets in 3D prints can get confusing fast. This simple tool helps you quickly identify magnet polarity and safely press magnets into place…
A small stand for your fishingpole(you will need a rod with a 1cm diameter)
This is one part (Solar Panel Bracket to Flagpole Mount) of an assembly. The completed assembly is a meshtastic node atop a 20Ft telescoping flag pole. Related Hardware: RAK Wireless WisBlock Meshtastic Starter Kit:…
This model consists of components to allow mounting of a 4x6" LED headlight lamp on a 2" galvanized pipe used as a flagpole. Fusion 360 source & STEP files are included. UV & heat resistant material, like ASA is recommended as is…
The screw is used to fix the light fixture to the top of the flagpole. A ornament like ball or eagle will not work with the external alpha 915 antenna. If you want to put an internal antenna inside the light fixture, then you can keep the…
Prints at 6x6inch at 120%, Sharp Round Corners so it gonna be tight and fragile Around the Points. Havent printed this one yet but Based on how the others turned out 4-5 0ut of 10 difficulty.
There is a 2 hold design as well if you are worried about it rotating. Holds things with a diameter up to 35mm.
I have a standard flag pole from Lowes/Home Depot. The flag attachment rings work; however, they fail over time. I created these larger, more sturdy versions to replace them (17mm internal diameter). Also, my flag pole came with a clear…
The pot is stable enouch to carry a massive rock about 5kg. The pot allows plenty of oxygen to reach the roots and it is possible to stretch wire over the surrounding eyelets. The pot has a diameter about 24cm and a heigh of 6cm. The pot…
GPON SFP Module Cover Protect your GPON SFP modules with this custom-designed 3D printable cover. It provides a snug fit for standard GPON SFP transceivers, shielding them from dust, accidental contact, and physical damage. Ideal for…
Při instalaci GPON bylo potřeba u některých zákazníků připojit GPON převodník a napájet ho vzdáleně. Jak jde vidět na dvou fotografiích nebylo to úplně ono. Vymyslel jsem pro to krabičku která skryje veškerou kabeláž. Tiskl jsem z bílého…
WHAT IS IT? This is a cap for the end of your flagpole. I went to check my flagpole in the spring and discovered that the end cap was gone, and thus, I couldn't attach my flag because the end cap had the hoop to clip The Flag onto! I…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Made to fit a Thule Omnistor awning post and a 6mm flagpole. I used a 6mm aluminium rod as a flag pole. The example was printed in PLA with a layer height of 0.2mm and upside down without supports
Für Knäufe will man TPU mit der Härte Shore 82A oder 85A. Härtere Filamente sind schwierig weich genug zu machen und weichere Filamente sind schwer zu drucken. Für das Filament will man einen direct drive Extruder, ansonsten gibt es viel…
Here you are allowed to use my self-made spools. These are designed for Bambulab filament, and while it's possible that other filament brands may fit, it has only been tested with Bambulab filament. If you've used a different filament and…
FIXED MagPowerstation Q820 - iPhoneSE podstavec k bezdrátové nabíječce iPhone SE je krátký a nefunguje bezdrátové nabíjení. Tento doplněk přizvedne telefon o 15mm a zfunkční bezdrátové nabíjení iPhone SE.
Mini version of Eggpool (Wade Wilson) Not much is known about Eggpool beyond a cover appearance with Spider-Ham.
A simple stand for organizing a workplace. Made it for myself but maybe someone finds its usefull.
This is a two-piece model. Glue the spike into the cylinder using acetone. Settings: Nozzle Size: 0.6mm Layer Height: 0.4mm Material: Polymaker ASA Infill: 100%
I made this because it's the logo of my 3D-printservice called 3D Print Service GPower Create. I sell these keychains, and you can make them for free here. Good luck, and feel free to be creative with the colors. If you create something…
This is a floating base for a piezoelectric disc and driver PCB found in the link below:…
This is a simplistic adapter which can be used to mount a v2 Starlink Dishy onto a 1.90" diameter Flagpole Buddy Aluminum pole. This is an effective replacement for the official version, in case yours has been lost or possibly just left…
Ein Gerät zum sauber machen deines Chargingport .
Because of thieves who stole my flags twice now i decided to make it a little bit more difficult for them.
Designed for the PVC base on the Uncommon Telescoping Flagpole: https://www.uncommonflagpoles.com/flagpoles/the-original-telescoping-flagpole/ Designed to be printed upside-down without needing supports. I recommend printing in PTEG or…
Remixed Korbyn's RV ladder flagpole mount in Bambu slicer to fit in the corner of a deck and screw into the underside of the 2x6s. Printed with .20mm layer height, 8 walls, and 30% infill with PETG.
Settings: Polymaker ASA 0.6mm CHT nozzle 0.4mm layer height Requires: 1x 3/8" wing nut 2x 3/8" washers 1x 3/8" hex bolt
This is Flatcan. Flatcan is a small Kitchen-Trashcan that utilizes the standard size dogpoop-bags. It is meant for your typical kitchenwaste that you find prepping your family meal, as that is often way too much for any classic 5L…
![Flag and Flagpole for [Dice Tower with Secret Chamber for Dice Storage]](https://media.printables.com/media/prints/457153/images/3756791_12fd0cc0-bb02-466f-b203-9fca777af703/95ca4810f5283ecbb39656d4735eb905_display_large_457153.jpg)
