Counting matching models…
Made a pingpong trophy as a present for a company. For the crown I used the model made by: mjmedien, https://www.thingiverse.com/thing:195852 and made it so it can hold a pingpongbat at an 5 degree angle. The slot where the bat sits in is…
This design handled my varied brands of pingpong paddles. When designing it was interesting to note the slight variations in paddles' backboard thickness, handle width/thickness, and curvature from handle to paddle. To accommodate for…
Hracia plocha: 150 x 150 mm Hrúbka pinpongovej pálky: 6 mm Priemer trysky: 0,4 mm Výška vrstvy: 0,3 mm PLA, nožnice, sekundové lepidlo, staré poťahy Postup 1: Vytlačíme si pinpongovú pálku spolu s jednou rúčkou. Druhú časť rúčky prilepíme…
Handy box for storing your squash, golf or ping pong balls. Because of its design you can have all balls stored together.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Hello and welcome, this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.…
For use with floater: Amazon Uses M3x6mm / M3x20mm hex bolts. The fogger has an optimal distance below the water that it works, this floating platform keeps it at that level no matter what the water level is at. Fogponics is an advanced…
Füllung 20% @Schichthöhe 0,3mm ohne Stützen, ohne Rand
Este soporte compacto puede contener hasta tres pelotas de pingpong. Su diseño ergonómico garantiza estabilidad y fácil acceso durante el juego, mientras que su fabricación en PLA lo hace duradero y respetuoso con el medio ambiente. Ideal…
LED-PingPong Ball Video Wall inspired by bitluni's version -> https://www.youtube.com/watch?v=ikhZ34WgObc&list=WL&index=27&t=0s Thanks Bitluni! -> https://youtube.com/bitlunislab -> https://twitter.com/bitluni Using WS2811 LED chains…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
držák pingpongovích míčků na pingpongovém stole
A quick print for a temporary indoor or outdoor table tennis setup, the wooden plank slot is 24mm and the table slit up to 17,8mm, m8 screws clamps it to the table.
GPON SFP Module Cover Protect your GPON SFP modules with this custom-designed 3D printable cover. It provides a snug fit for standard GPON SFP transceivers, shielding them from dust, accidental contact, and physical damage. Ideal for…
This is a floating base for a piezoelectric disc and driver PCB found in the link below:…
Two piece paddle and ping pong ball
Hi there, I was looking for a solution to print a bi-compound PLA-TPU object without Multifilament, It is well known that TPU and PLA are not well stackkable as it is not sticking well to each other. see I illustrate My concept with a…
Enable supports, Print as is maybe. Not sure yet
Fits quite tightly. Optionally print at 99% scale if you think that's scary. Push hard otherwise. I suggest printing the STEP file as that has true curves unlike the STL. The post will be more round.
Hi, This time I present to you a PingPong ball container. It can hold 3 balls. Features a screw on lid and twisted design. The lid can be printed in 2 colors with layer change. Main Body printing instructions: Layer Height" 0.1 - 0.2mm…
For 40mm PingPong Balls Don't swap upper and lower inset's. the taller one ist the lower the smaller one the upper inset. use 2mm spokes as hinges. surface structure added with https://bumpmesh.com/ . easy print, no supports needed print…
This is a remix for the Huawei HG8010N-10. The original HG8010 is smaller and does not fit.
Opening and closing lever broke on my Sponeta pingpong table (photo with a red lever), so I took some measurements and created my take on the lever. I never contacted customer support, I just saw an opportunity to print something :). For…
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate was developed to explore alternative interaction techniques where a lightweight ball can be rolled or displaced to generate motion input. The…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
This is a remix for the Huawei HG8010N-10. The original HG8010 is smaller and does not fit.
This UPS 18000-21000 mAh is a compact and powerful solution for power outages. The enclosure is designed for adhesive bonding. Screws are 3x10mm - 4 pcs. The board itself is -…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A simple stand for organizing a workplace. Made it for myself but maybe someone finds its usefull.
This UPS 18000-21000 mAh is a compact and powerful solution for power outages. The enclosure is designed for adhesive bonding. Screws are 3x10mm - 4 pcs. The board itself is -…
Made this for myself and turns out its very popular and would like to share it v2,v3,v4 are all works in progress but very close to being final. Print settings I printed it 20 % infill 3 bottom layers, 5-6 top layers depending on your…
Při instalaci GPON bylo potřeba u některých zákazníků připojit GPON převodník a napájet ho vzdáleně. Jak jde vidět na dvou fotografiích nebylo to úplně ono. Vymyslel jsem pro to krabičku která skryje veškerou kabeláž. Tiskl jsem z bílého…
