Counting matching models…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
Stripe From Gremlins. With or without base.
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Recommended order: Black, Dk Brown, Lt Brown, Grey, White or Black, Dark red, Orange, Grey, White. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
Type: Protractor Size: 150 x 84 x 1.50mm
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
Plate Caution 3D printing 200x200 mm in three colors, gcode PTEG and PLA is in progress.
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Straight from the Green Lantern Corps. You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant
22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases Deep in the depths of the Megalopolis' is where the finest music is born. Status, upper level personages, mutant, or freak, synth music is made by all.…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for one variant
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
I was researching for a mount hand which can handle HyperX SoloCast Mic and found this attractive tablet/phone holder. Adapter which I create is not required any additional screws and nuts. You just replace part. Print instructions:…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
With a Curved back and shortened overall length. 22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases. Making music is much simpler with your Euroracks single-row cases at a splendid 22.5 degrees. No…
Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant
I wanted to have a way of quickly seeing the progress of my current print, without visiting my printer, an app or the webpage of octoprint. Also I needed a use for the LED-Ring I bought a few months ago. What you will need: NeoPixel…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Both the large and straight jaws move together and always have the same gap, allowing you to use a ruler or vernier calipers to make the measurement of some awkward places without guessing. I designed these to measure the thickness of my…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
There are a lot of online meetings these days, and you see lots of trouble. The most common one is that someone comes into the meeting. I made a sign board for during zoom meetings. A step file is also uploaded, you can mix, change fonts…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
This remix allows the buffer to be fastened to the shelve using the existing method, but oriented in a 45 degrees angle. Some background: With the great designed MMU slot buffer by Martin_J placed on a shelf above my printer I experienced…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Coat of arms - Greece Znak - Řecko
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Kleiner Schlüsselanhänger für Big Green Egg Fans (EGGheads). Nachempfunden einem offiziellen Big Green Egg Merchandising Artikel. Gedruckt in PLA, 0,10 Schichthöhe, 0,4mm Düse, Farbwechsel bei Schicht 14 / bei 15mm Höhe Small keychain for…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is a battery holder that looks like the Great Wall of China . It can carry AAA Batteries; when you take one from the dispensing area, another battery will roll down to take its spot. You can use this to organize AAA batteries that…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
to hold a 45 dg hook
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Simple print made in Prusa Slicer. Only additional materials needed are memory foam and felt pads. memory foam should be 1cm (0.4") thick. Cut to 18cm x 26cm and place inside tray. Felt pads can be any size, I would suggest putting a few…
Print approx. €10.80–€13.20 excl. taxPreliminary estimate for PETGSource material: PET
Historical ww2 toy greyhound 1 body and 6 wheels
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for PETGSource material: PET
🔐 Boîtier ESP32 NFC TagReader Voici un boîtier 3D compact conçu pour intégrer : 🧠 ESP32 DevKit (esp32dev) 📡 Module NFC PN532 (I2C) 💡 LED WS2812 🔊 Buzzer 🔘 Emplacement frontal pour bouton Aqara Le tout dans un format propre et discret,…
Print approx. €5.59–€6.84 excl. taxPreliminary estimate for PETGSource material: PET
Waterproof card with 100 dimples. Push the dimple with a sharp object to turn the dimple into a hole and track something. Can be used for tracking wash cycles of personal protective equipment such as high-visibility clothing.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Checkout: https://www.instagram.com/p/DM0ot01NQ84/ The clock can be bought here: https://eu.store.bambulab.com/products/clock-components-kit-011?id=47743175819612 Remember to add the color changes when printing the dial if you want the…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
UPDATE : New version available https://www.printables.com/model/390212-coaster-printing-in-progress-spiral-edition ---- This is a coaster representing a nozzle extruding filament, it will prevent any spilling on your furniture. The…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…
The Evergreen Vase captures the essence of timeless beauty and nature’s elegance. Inspired by the strength and serenity of evergreen trees, this 3D-printed vase brings a sense of calm and freshness to any interior. Its smooth, organic…
Green Lantern Rings Inner diameter: 22.5 mm (0.885" according to google) No supports needed (when printed logo down) Design based on older photos from…
guy gardner green lantern ring from the 2025 superman movie
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
I made a dummy grenade that has an articulated spoon using a stock BIC pen spring. Great during for example airsoft and training purposes to give you that extra split second to enter a room. There are 2 types of body's for the grenade,…
I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…
Remix based on: Yeezy Slides (Printable) By Orangemn6 Yeezy Slides separated (right and left one) and scaled. Shoe Size: 9.5 US MAN / 7.5 MX Scale it as you'd like UPDATE: 18/08/22 I printed right slice and it was a bit smaller than…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
Enhanced Z rod grease contact bushing caps for the Elegoo Centauri Carbon. These grease cap bushings feature easy application port reciprocals that interface with the stock grease tube originally included with the Centauri Carbon. The…
We found a lot of cookie cutters for 3d-printing that looked very cool, but often didn't work so well in reality. This one here has now been thoroughly tested and optimized several times. After having eaten a thousand cookies, we have…
I think this is a beautiful scan put out by the Auckland Museum, I just wanted to try and make it more printable and the edges and delicate jaw cartilage strong enough, was fun trying to get it to work with remeshing and other trial and…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Holder for Type 2 charger cable where the cable come in from the side, better fit how the cable is looped around the holder. You may want to print this with supports. Edit: I've added a picture of the areas that you may want to have…
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
The 90-degree clamp is an essential tool for any woodworker. This 3D printed clamp is designed to hold pieces of wood at a perfect 90-degree angle, making it ideal for creating precise joints. Whether you’re building picture frames,…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
This is accurate enough for you to make mods for the sprite Mounting wheel spacing may be incorrect This file has was made starting with an extruder model ripped from one of the Ender 3 CAD files. The mounting wheels are from the same.
This is a variant from my previous design : https://www.printables.com/model/231240-coaster-printing-in-progress There is 2 sizes available : Small size is arround 95mm in diameter Large size is arround 105mm in diameter You can print the…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Remixed model based on a sculpt from mz4250 (Miguel Zavala), i just changed the pose. No supports, i trust you, you can do it!
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more. https://discord.gg/Ce9BJ2DK3j The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640…
A folding sign to warn others that you are printing! Uses a piece of 1.75mm filament as the pin to connect the two pieces. A small piece of electrical tape on the bottom of the legs gives the sign good grip on the floor. The back of the…
A Desiccant Loop Silica Gel Box for HDRY System Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup. Learn more: The…
This is a prototype replacement shell for the Thunder B airsoft grenade, my first test print fits perfectly on my grenade, just make sure to print the filet with a low layer high like 0.1/0.5 for a better seal/fit. You will need the best…
Hostile monster for tabletop dnd adventures. Check out more from my collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
Hostile monster for tabletop dnd adventures. Check out more from my collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Gridfinity hex bit organizer: 1x3 base 4 units tall 36 slots for ¼" (6.35mm) hex bits bits held at 45-degrees label area OpenSCAD .scad file included (outdated - will update) printed without supports part cooling is necessary for the…
Perfect for the man cave/hobby room! There are 4 versions, 2 with holes in the corners, 2 without holes and with different fonts. Measures 18 x 11 x 3.3cm
Hi! These are 4 and 5 unit angled (45 degree) tool holders for shallow drawers. Note that large objects such as the Westcott scissors in the photo will overhang over adjacent Gridfinity squares. Features: 45-degree display angle 4-unit…
The G-16 impact grenade from Helldivers 2! I tried to model it as accurate as possible, and the size should be correct. If there are issues I will go in and touch it up.
Description: In spaces where every inch matters, the Compact 90-Degree Bent Pipe with 1 1/2 BSP Threads takes center stage. This 3D-printable model is tailor-made for applications like water pumps in tight confines, providing a…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
“Stick this explosive to any surface...or player!” While this model for the clinger grenade can't actually stick to anything, it is still really cool to print out and hold in your hand. I used a reference photo of the grenade and modeled…
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets. 135 degrees version of them can be found at https://www.prusaprinters.org/prints/43057-20-mm-wide-135-degrees-t-slot-angle-brackets
*This is a work in progress* I'm looking a way to atach the mount to the chasis but there's a few whitout making a hole in the base I use this aux fan from bambu lab…
This is the Ogre, a pump action Mega XL revolver designed to be fired from the hip. It has a five shot capacity, and features quick swappable cylinder and spring. With PCAR in each chamber, you can shoot straight with MXL- it's…
Green House 1/2 inch conduit 3D print corners See Thinivers 6225649 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: MatterHackers.com PLA black Notes: Green House…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
2 sizes: 51mm inner 58mm inner + full 45° cut
If you like the model please like and follow!
Green Hag — Fey Villain | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Green Hag Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out free…
For Super Earth! G-123 Thermite Grenade Are pesky Hulks turning your squad into paste? Are Shredder tanks treating you like last week’s ration pack? Fear not, Helldiver! The G-123 Thermite Grenade is here to light up the battlefield—and…
This package includes all of the files & documentation to build one of these yourself. The clock is a very beginner friendly project and the progress bar is a bit more advanced. Instructional drawings are provided as well as wiring…
WELCOME TO THE PARTY PALS!" I designed this X-Mas Tree Topper in tribute to one of the GREATEST Christmas movies of all time! Yes, DIE HARD is a Christmas movie!!! It's a super easy project. and yes, there may be some Nakatomi Towers out…
This kit is made to enhance the Astropixels light kit for the Mr Baddeley R2D2 This kit contains all the part I made to make the Logic displays, PSI and Holos look better on my Mr Baddeley R2D2. IMPORTANT : Some parts require to add a…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
STL conversions of all the greenpower f24 kit car parts and some assemblies
My first aggressive inline skate frame design. More about it on my website here .
Its a Fragmentation Grenade Prop for cosplay or decoration I will Probably post some custom pieces to customixe your own frag grenade prop the way you like it more :) Suggest some ideas to me to 3d model Use Supports and Brim
A detailed miniature of an ancient Greek temple in ruins, inspired by classical architecture.
UCI's own version has been released! The same day I posted this I got the link for UCI's own version: https://www.uci.org/equipment/bh2JJzw1eB0n876rX2iB1 This will take you to the “Equipment” page. Scroll to the bottom and expand “UCI 3D…
Description A sealable box that unravels using gears. The handle locks in place after assembly and prevents it from accidental rotation. In order to open it, you have to pull up the trigger and then rotate. If you press the handle…
A 3D model of a Grendizer/Goldorak enemy spaceship that i made with ZBrush. I made two versions. One complete and another that can be printed in two parts to eliminate the use of supports under the spaceship and have a clean model.
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
![[NEW MODEL IN PROGRESS] Mini Federal Signal Thunderbolt (Functional) [NEW MODEL IN PROGRESS]](https://media.printables.com/media/prints/ec0ac4b5-cb04-4fee-9875-f961f9ef126a/images/12745673_affa9b69-e625-4314-b564-a7ad6a6e6af9_857d78fc-04a8-4837-94bd-40ae7cfbabba/screenshot-2026-04-22-230545.png)
![[WORK IN PROGRESS] Mini Brake Stand / Mini Brembo Z18 for Mini Wheels](https://media.printables.com/media/prints/371322/images/3128148_7a32e244-fb8e-485a-aa52-3109f892af8f/bremsooooo.jpg)
