293 models
Tapo Gundam Original Skin Hello all, apologies I was away for traveling... The file is originally from a chinese printable user that has it made for another tapo version. I have a C220 at home and I had to make some adjustment and seems…
Gundam is a Japanese anime franchise featuring giant robotic suits known as 'Mobile Suits,' which engage in epic battles as part of a futuristic, interstellar conflict.
I designed this impressive Gundam hangar, which consists of several standout features. Let me provide you with a detailed description: The hangar is a spacious interior space. It is surrounded by seven walls, which rise up and provide…
Gundam EZ 8 - 8 th ms team 1/144 scale (1:144) this gundam model is from psp game gundam vs gundam from the anime gundam 8th ms team, the later model that repaired (dont have classic gundam head) is in scale 1/144 like all gunpla but not…
The only difficulty with this one is setting up the support structure. Check out the screenshots for manual support recommendations. The thin tree supports were easy to remove so I can recommend them.
I include the STEP file in case you wanna modify them. This runner holder should fit most model kit runner.
I hope you guys enjoy it as much as I enjoyed building it. It took me four weeks (1 to 2 hours a day) to finish this working model, and there is still a lot of room for improvement. Printing: The files names with “requires support” suffix…
Please note this is an untested print. Inner whole from left to right is 16cm wide incase you want to increase or decrease the size to suit your head. I have slice it as best I could to print, but there was a couple of objects that will…
HG gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off…
A sample of some of the parts available in the full kit. Pre-supported and test printed, Micro Gundam Model kit. More info here : https://cults3d.com/en/3d-model/game/msa-0011-ext-ex-s-gundam-artifact-scale Or…
NEMO_MK2 @NEMO_MK2 - MyMiniFactory All the 3D models of NemoMK2・Cults (cults3d.com) Visit my store to see more things ;) Legolized gundam as you see :) The height is about 13.5 cm. All parts are separated as their color. And pre…
Gundam head model overall height is around 13cm need 1 magnet (size 6x3mm) (optional add another 2 magnets on the side but it's not necessary) Every part can be printed with FDM or Resin
The main stand is separated from the peg that the model mounts to. I recommend slicing the peg lengthwise to print, then gluing the halves together afterwards. Some post-processing will likely be needed to get a good fit. Two variations…
This is a new design and differnt than my old design. This will fit most of the runner with all the weird nips on some runner.
Here is Gundam Exia Mask. Print instructions Category: 3D Printing
Edit of the original design to have a perfect fit for your average printer. hole on the arm is designed to fit a spru snipping. all i did was edit the size of the hole on the arm for better tolerances, after 2 test prints it fits perfect…
Highly recommended the use of Hunky_clavicle_2mm_added_for_hip_armor.stl https://www.printables.com/model/747026-hunky-13-dummy-13-variant-larger-clavicle-shin-and/files
This is an organizer for the board game The Castles of Burgundy (2019 edition) and will help during setup/teardown and gameplay. Print 1 of each unless stated otherwise: Trade: Holds the trade route tiles and can stay in the box. Tiles:…
I used this store everything i need for model building from the Nippers, Tamiya cement, Mrhobby, Panel Line, and others things. This model is designed with Madworks Sponge Sandpaper for the sandpaper holder. I will include the STEP for…
SD gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off…
Also check my other Gundam model: https://www.printables.com/model/864699-dummy-13-wears-mobile-suit-gundam Hope you like it. Please share your feedback!!
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
This is a classic Burgundy wine bottle which can be printed without support
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
Dummy 13 Barbatos Complete
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
halos on any setting is fine. saber is better with any extruder smaller than 0.4
Do you feel left out by having the Ravensberger version instead of the fancy $150+ dollar Special Edition? Well, this will more than make up for it! I started with the coins , ships and mines , and figured why not castles too? This is a…
I put a cut version of Mini 13's head inside of a empty Strike Gundam head. That's all. Now you can have a custom SD Strike Gundam. Or at least the head.
Looking at the Barbatos Shin armor model, I thought it would be better to make it more robust. I recommend using it together with the Mici's Dummy 13 thigh armor and thigh frame.…
📘 Description (EN) This model is a civilian-use Junior Mobile Suit inspired by Mobile Suit Z Gundam . It is designed as a non-combat mobile suit , intended for industrial and commercial work rather than military use. The proportions and…
The Gundam Kickstand was designed to print flat and quick, with friction assembly. Print a bunch of these in cool colors and share them with me! Might make a stand with led mounts if there is enough interest. I have included a kit card…
Step by step, Dummy 13 Barbatos will be complete.
The RX-0 Full Armor Unicorn Gundam (aka Full Armor Unicorn, Unicorn) is a variant of the RX-0 Unicorn Gundam and is pilo
Minimalist and small for easy display Print Settings: 0.15mm Layer Height 10% Infill No Supports Dimensions: 90mm L x 60mm W x 80mm H
Just some badges I use as fridge magnets. Category: Signs & Logos
Gundam Exia compatible with Dummy 13.
Originally designed for a diorama I am intending to build (on pause for shelter-in-place) for/with one of my students, this is a 1/144 mobile worker to display alongside an HG Gundam Barbatos. The goal was to balance detail, anime…
And now it is possible to hold heavy weapons and smash the enemies.
And now Dummy 13 become a mecha Tekkadan's White Devil.
The mini adventure Lost Mines of Phandelver includes a Dwarf named "Gundren Rockseeker". I found that he wasn't on Thingiverse so I wanted to create a model of him to fill that gap. He's a pretty basic NPC dwarf that gives out quests at…
Piece by piece, Dummy 13 Barbatos will be operational.
I have added an hg scaled model. It fits well with the Hg Fake Nu + Core Gundam.
Fits this edition https://boardgamegeek.com/boardgame/271320/castles-burgundy
Now we have more Barbatos armors, wait for more. Barbatos D-13 will be real. D-13 = Dummy 13
My friend Jorge modeled this Gundam cockpit from a toy he found online. I reworked some of the geometry to better suit 3d printing, and he let me put it up here for the rest of y'all to enjoy. Try and position the parts as best you can, I…
Hi this is my first attempt at a Gundam related accessory, i used to store my tools in a small container where i leave my plastic nubs and shavings in. It got annoying to keep on knocking off the shavings from my tools when i used them,…
⚠ WARNING: To properly print this model, you must enable tree supports . Be very careful when removing the supports, especially on small and delicate parts like the head antennas and hands, to avoid accidental breakage. Model Description…
Das Insert ersetzt alle in der Spielbox gelieferten Inlays. Es passen alle Acrylteile + Playmat rein. Kein Lidlift/Deckel schließt komplett. Die Playmat muss relativ straff zusammen gerollt werden, dass sie in “Layer 3” passt. Drucker:…
Didn't really care about the text and removing it simplified the model a bit and saved ~25 minutes print time @ 0.12mm
sd Gundam fan art style sd Gundam mecha
Gundam Head Bead or Straw Topper
Migrated from Thingiverse. Been trying to get some hands-on experience with several 3D modeling software and thought it would be best to start with working with some existing objects. Recently got into those Gunpla modeling kits and saw…
the hanger was made with fitting into an ikea glass display in mind, all parts are printed except the 2.5mm rods for connecting the bases together. assembly is straight forward, the connector pegs are used for the vertical connections of…
This is a Linear tank for gundam seed, used by target practise by ZAFTs mobile suits until it was replaced by mobile suits towards the end of the bloody valentine war, but served on in second line units even into the 2nd valentine war as…
Wheelchair model for HG Gundam kits. It was originally modified for the Zaku II, but should work for most standard sized HG kits. For HG kits rescale to 75%. For the wheelchair frame I would use at least 50% infill and 3 walls since the…
I am still working on it. only legs are ready at the moment. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!! Also check my other Gundam model Dummy 13 wears Mobile Suit Gundam…
The display base was out of stock so I decided to design it. I don't think it is done just yet and I plan to add some more adapters for other kits like the Moon Gundam. Please be free to remix it and add your own touches and designs. So…
I am still working on a skirt for it. NOTE: - I have used waist frame joint of Dummy 13 frame for abdomen and shoulders. You can choose regular shoulder frame too, but I thought waist joint will give more flexibility. In short you will…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
Gridfinity-compatible bins for holding GSI-Creos Gundam markers. There are 4 bins: - one for holding the 6 packs of alcohol markers such as the SEED or Zeon set - one for holding the pour-type marker sets (5 pour-types + larger eraser…
Feel free to modify this! Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printing
I am still working on it. The model is almost done. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!!
AI Generated Gundam that stands up! Supports required. 2 color AMS painted. The AI doesn't consider printability or fragility so best of luck to you in generating your own, it takes some patience! Powered by PrintMon from MakerWorld…
This is a set of organizers compatible with The Castles of Burgundy Special Edition - Acrylic only . The original inserts that come with the game are very well designed, and suitable for cardboard tiles. However, I find it very tedious to…
This is a dummy core required for combining the main body while displaying the core fighter separately. No support required, just print vertically.
The stock trays for Castles of Burgundy: Special Edition were quickly showing wear and tear in my short time with them, and I also wanted to be able to table the game more quickly. This insert is designed to assist with setup and teardown…
If you build snap-fit model kits like those made by Gundam, Gundam Plamo or Gunpla and need to take some pieces apart again, this could be a tool for you. This handy tool is designed to separate connected parts and variously shaped edges…
Use: 3x M3x5x4 Heated Thread insert 3 M3x6mm Screw
This is a 1/144 MAJ-V34 Jiachong a AFV from Human Reform League in Gundam 00. This is tiny, at 1/144 this is 51mm long, you will not print this at 1/144 on anything short of a dlp/sla printer. Test complete, all parts fit although handle…
鋼彈水星的魔女 : 節點機 GUNDAM THE WITCH FROM MERCURY : GUNDNODE Our Fan pages： https://www.facebook.com/profile.php?id=100092846353992&mibextid=ZbWKwL
ASW-G-08 Gundam Barbatos Mace Spear This is a cosplay model of the Gundam Barbatos spear mace thingy from season 1. I tried to model this full scale but that made no sense in terms of making it actually usable in terms of a cosplay…
These are swap-in replacements for the cardboard ships and mines used in the Castles of Burgundy board game. I have the 2019 Ravensberger version, although I believe the original also has the same hex tile size. The ships and mine are…
Tip: I attached the helmet with soft double-sided tape to ensure a better helmet fit. And i use two camera riser Print with supports! I used 1kg of PLA in army green
This is a mishmash of a couple of different designs. I took the parts I liked from each one and changed a little here and there and poof! We have the ultimate Castles of Burgundy Anniversary insert! GeekUp Bags from BGG Store -…
Pretty simple sprue organiser, wish I had made one sooner!
I wanted to try making a kit card. This is based on the core fighter from Gundam. Full scale it is 100 mm long and about 7.5 mm wide. The parts can also be printed separately and assembled Category: Vehicles
This duchy grid is meant to replace the grid included in the castles of burgundy special edition by awaken realms. The semi-transparent grid is not aligned correctly with the hex spaces (as seen on the comparison image), which really bugs…
I am pretty much done with the model. just working on chest part. Will post the whole model in a week. [ Ignore print quality my filament is really old and brittle ] Arms: Gundam Dummy 13 Arms [Hyaku Shiki] by Power Jojo | Download free…
The Idea: Insert for The Castles of Burgundy easy accessible organization organized by setup and in game material fast and simple setup and teardown fits the original box insert flush in the box for vertical storage minimizing filament…
Zaku Gundam Bead or Straw Topper
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
Didn't want to fiddle with the tiny tokens that came up with the Gundam Card Game starter boxes, and have made a little organiser for 16mm or 15mm (Gundam sized dice) dice and my own tokens. The box is sized to match the dimensions of a…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Print the file and use one of your many leftover runners to attach your Gundam (scale 1/144). Runner length will vary depending on model. Test fit everything before gluing runner into the printed piece.
sword for Gundam model Hyaku Shiki
This is a simple coin that I made for the Castles of Burgundy board game. The cardboard tokens didn't do much for me, so I made these. Each side has a fleur de lis, one side extruded, and the other side inverted. I used Prusament Galaxy…
Gundam Stand 1/144 both peg and box style , requires support
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
modeled this up for fun, it fits a 1 in core. Category: Props
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Design Concept The Chibi Robot Figurine draws inspiration from the iconic Gundam series but presents it in a cute, chibi style. This model is intended to be both a fun and artistic expression of everyone's favorite mobile suit mecha…
This 3D printable pedestrian bridge is designed to enhance Gundam dioramas, offering a realistic urban or industrial setting for scaled models. The bridge consists of multiple interlocking components that require assembly after printing ,…
This is a box insert for The Castles of Burgundy (2019) designed to keep all the components organised in the box and make setup faster. Note this is the “anniversary” edition released by Alea in 2019, the version with the three keys on…
Parametric version of the Gunpla Runner. It's printed as one piece, no assembly or supports required. Slightly easier to use, and provided model file if you want to make changes to it. The parameters you're most likely to modify are the…
Just the head of the Unicorn on a blank keycap. the V fin is very long and very thin, I printed mine out with a 0.2mm nozzle and on its back. Needs supports, at least if it's on the back it'll be less noticeable.
Incluye: Tokens de marcación de daño del 1 al 6 Tokens de puntos de habilidad del -4 al +4 Tokens de puntos de vida Tokens de apoyo (Linked, Paired, Can't Attack & Ability Used) Se recomienda imprimir con nozzle 0.2 boca arriba, para una…
![MSA-0011 [Ext] Ex-S Gundam [Artifact Scale] [Free]](https://media.printables.com/media/prints/529483/images/4276285_70782fe4-78cf-4f7f-9adf-d5b4025016b8/01.jpg)
![Gundam Dummy 13 Legs [Hyaku Shiki]](https://media.printables.com/media/prints/954080/images/7277132_46e37920-f9a1-4a3e-9f49-bfbe3823089f_114923b3-3328-4ec8-80bd-644c96eba3d7/20240725_152148.jpg)
![Gundam Dummy 13 Arms [Hyaku Shiki]](https://media.printables.com/media/prints/966689/images/7378707_eda5abb2-e035-4e2b-84d4-c52f71b8ad6c_5a38e99f-5930-49f7-9f54-f91cf4cfd3fb/1600.jpg)
