Counting matching models…
Sound sample 3d printing tips I printed most of the parts using a layer height of 0.2mm. But for the bigger pieces, I bumped it up to 0.25mm. This change helped speed up the printing process without compromising the strength and overall…
For demagnetized's Hurdy-Gurdy model. A couple of the parts needed to complete the model were hard to find/overpriced in my area, in this case metric socket head cap screws and metric ready rod. Plugs designed to replace the 28 M3x10…
Dear All, my tangent redesign for an easier printing of both hurdy gurdy tangents. You will need to print those layed on the longest face. This allows a stronger edge design with no break along the printing orientation. You will however…
Hi there, If you are building a Nerdy Gurdy kit, at some point you need to paint/varnish all parts including the keybox. The manual says to not get any paint/varnish in the holes. This is hard to avoid with a sloppy paint brush/spray can.…
A second mod of the knob for the nerdy gurdy which can be adapted to any hurdy gurdies as soon as one use two 608 zz bearing and a screw rod m8 and m8 nuts to mount on the crank part. Enjoy. En francais: une poignee de vielle à roue…
Hark! Weary traveler! Sit a spell and allow me to regale you with the tale of embarkation to luthiering a hurdy gurdy using the quite remarkable bit of engineering dropped by demagnetized and subsequent mods by dablob, and how I've made…
Takes shaft collar of following dimensions: bore diameter 8mm, outside diameter 14mm, set screw M4.
This is my knob design for a Nerdy Gurdy . It is comprised of 2 parts which screw together near seamlessly. You can barely see the seam, and can't feel it with your fingers. You can barely even feel it with your fingernail. It only needs…
Dear All my knob originally for the Nerdy Gurdy from Jaap Brandt.but works for all gurdies if you adapt the crank part to knob to fit to your one. I Printed it with my m3d using a blue transparent PLA filament. Finishing with heat gun to…
this is a new variant of the crank arm for the electric hurdy gurdy by demagnetized which uses a m4 bolt with a longer distance to the shaft in order to provide much better durability, this crank has the same leverage as the original and…
c'est una vielle a roue (hurdy gurdy) electroacoustique inspiration par daniel frouvelle, only figure, for decorating or cosplay, in the hole in back you can put a homemade crank, inspiration of guilhem desq hurdy gurdy made by daniel…
Dear all, A small design as a replacement of the bridge adjustable part. I used a copper metal filled filament (20%) from Renkforce. It is easy to file. I added three positions in order to adjust the position of the string over the bridge…
Hi everyone, this is another version of my knob for hurdy gurdy / nerdy gurdy. I made the contact part with the hand palm smaller than the other two I share with you. The reason is that in the hurdy gurdy the knob must roll in the palm.…
Dear all, it is a side part for the ugear Hurdy gurdy mechanical toy. My son broke two of the many parts that are holding the front and backside together... by letting it falling down. as the part is a non exact copy of the original, I…
This is a modified version of the Electric Hurdy-gurdy that eliminates the need for an electric guitar pickup. While most of the parts remain the same as in the original project, there are a few key differences: Instead of printing…
