44 models
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I needed a plate so I made one to spare other people the pain of 3d modeling
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
60% Gasket Keyboard Case (GH60) base on Cheap 60 Pro Parts : 8pcs M2 x 8mm screw insert 8pcs M2 x 12mm screw 4 x Bumpons 8mm diameter I upload the plate outline as well for you to custom your own keyboard layout.
This is not a 1:1 reproduction as I modeled it from images with no references other than “feel”. However it is good enough and works well enough and has done for a good many months now with heavy use. Partly recorded the journey on the…
Here are replacement drive gears for Athearn and also for Walters Life-Like Proto 2000 HO scale locomotives. There are 2 files for the gears: The "Original" file is the same exact total length as the Athearn gears, part # ATH60024. The…
Pretty simple print. I printed at 10% infill, .3mm layers with 2 perimeters. It's not a perfect fit, but it holds it great, and it doesn't cover any of the light. Hopefully this doesn't violate any IP rules-- I measured the lightbar and…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
This is a modernized case for GH60 or 60% formfactor keyboard designed to be a bit bouncy when you type. The case is designed to mount the GH60 PCB via Soft TPU jackets instead of screws. Your 3D Printer needs to be able to handle minimum…
Tutorial Updated 8/12/2021 Added a teensy mount as well as larger holes for the screws. Use the "updated" bot parts. Motivation Keyboard 3: Ok, I get it, there's already a ton of 60% keyboards on this site. A few weeks ago I got very…
I bought a Govee H6076 floor lamp a while back and used to lie it flat on top of a desk to get some ambient light behind me when working/streaming. I decided since I was going to fill the wall with Honeycomb Storage Wall plates that I…
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
I print the Luqa's model and play aroud it, I found my magnets stick together when I draw it from this case. so I design a new magnet organizer from sketch, the magnets cannot interfere with each other. I also make a hole in middle of the…
I was looking for a slim wall mount for my Govee H6076 Floor Lamp . I took inspiration from the original model and adapted the mount to suit my needs. To attach the brackets, you need 3 screws with a maximum diameter of 4.5 mm. Please…
Mount for Zebralight H600 headlamp to GoPro style fitting. Used for night skiing and biking. Uses a rubber band common with Garmin cycling accessories and other bike light mounts to secure headlamp into mount.
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
This bracket allows the use of the Corsair H60 All-In-One watercooler for AMD RX Vega 56/64 (reference board and PowerColor Red Devil 64 tested). It requiers: 4X 20mm M2 Bolt 4X 4mm M2 Nut 4X M2 Washer You can reuse the X-bracket that…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
This is a basic, easy to print mount to modify your Jumbo Bulb with the Govee H6006. Enjoy I used ASA with 20% infill at .2 Invite me a coffee 😊 https://cash.app/$Galdooo
I use Brass insert M2 x D4.0 x L5.0 for case Recommend low speed for Switch guide
I've created a neodymium magnet holder that fits in Zebralight's Tailcap, if tilcap measures 24.20mm in diameter this will work fine! I did 2 versions, 1 to use with flex materials (the tailcap hole is narrower) 1 to use PLA etc, a little…
Under shelf mount 70 degree angle. You will need to file down one of the screws used to attach bracket to mount so that you can pass through center mounting screw with screwdriver.
Door release button for the LG MH6042U microwave oven. Print best in PETG. Orient the part horizontally, as shown in the photo.
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
I like the design of Hermann S for the Lenovo Tiny Mount. So I adapted the model for my Minisforum TH60 and the TH80. 2 Versions: -Normal: Front IO Visible (as in the Picture, No Power Button!!!) -Reverse: Rear IO Visible (with Power…
Adapter to use the Corsair H60i WaterCooler in a Socket 771/775 CPU
Discover our 3D model of a Kogan QH6000 Remote Control Holder for efficient home/interior design purposes created by Khalm Down Hobbies. This simplistic yet effective model is designed to mount the remote up on the wall securely,…
This model extends the GridLink Genesis ™ system with edge parts sized to allow matching the Voron 2.4, 350mm panel mounting specification. I ran out of filament about 2mm from complete on my last batch, so 4 of the pieces shown in the…
Updated 8/25/2025 Fixed cherry mx stabilizer top Updated 7/5/2025 Added a cherry mx stabilizer top. Use top_left_cherry.stl and top_right_cherry.stl Note: Not Tested, may be too tight Updated 8/12/2021 Added a teensy mount as well as…
This is a simple tray that perfectly fits a H60X or any similar 88mm x 88mm model. It can be used anywhere you want with some screws, but it's also compatible with multiboard , easily attached to it using a couple small thread 9mm T-Bolts .
I'd planned to hang with either knotted or a loop of 8mm rope, but switched to multiboard rails. If you wanna try the rope thing maybe glue the 2 parts together so they don't slide apart. Printed in Siddament PETG as he does tool coloured…
Držák je určen k uchycení na stojánek pro modely typu F3K a podobné. Lze vytisknout buď jako celek s ližinami, nebo ližiny zvlášť a následně je přilepit. Na stojánku drží nabíječka pomocí ližin a neodymového magnetu o průměru 20 mm a…
Should be the exact same height and outer bezzle thickness as the Govee Tri LED Panels. (Idea from https://www.printables.com/model/657277-govee-hex-panels-parametric) Created them to glue some moss into them and make it look pretty on…
I ordered this aluminum 60% keyboard case from TechKeys: https://techkeys.us/collections/accessories/products/60-keyboard-case But it didn't come with any way to raise the back of the keyboard, and I prefer having my keyboard at an angle.…
GridLink Genesis ™ is based on a 60mm square, 20mm thick (6020) base tile. It is the most structural, strongest and most insulating of GridLink series. At the 5012 or 6020 level, GridLink is more than capable of serving the same purpose…
Roma F7/F6/F5 V2 Accessories Building Parts This is a work in progress, Will update to a more accurate version when replacement arm arrives. This is for anyone with access to a cnc. Tried this with PLA Meta but arm resident frequency made…
Desk mounted holder for the Govee Floor Lamp. I made it 3 parts for easier printing. You need an M4 flat head bolt and 2 M6 bolts, with ome #4 screws.
Mount your accesspoint directly on the Attema CH60R ceiling junction box. Slit in the ring is for the UTP to route to the AP.
Bracket to install Corsair AIO Hydro H60 year 2018 model liquid cooler into AM4 mobo cpu cooler mount. Please use original am4 mobo backplate and imperial sized screws to attach this to the motherboard. I used following insert (…
1.5u and 2.5u blockers for hhkb layout on dz60 rev3
I use Brass insert M2 x D4.0 x L5.0 for case Recommend low speed for Switch guide
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
