Counting matching models…
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
Check out https://www.prusaprinters.org/prints/132320-improved-one-piece-capo for an improved version of this capo. No fiddling with screws and levers - this one-piece capo clips on with one hand. The presser bar is contoured for a…
Snap this onto your DualSense and you've got an all-right controller! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the…
Single-handedly the best DualShock adapter! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the thumbstick. There is a 4-to-1…
It works like this: Two different versions are included. One for left-handed and one for right-handed gamers. Print the parts in PLA with regular 0.2 mm layer height settings. All parts can be printed without supports. (the A button has a…
This is a more elaborate bottle opener (using the same basic profile from my OpenScad Bottle Openers here ) which aims to be used with only one hand. Tip: Use your thumb to keep the opener in place. There are two similar designs:…
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Description: This is a simple model to help hold a book with one hand. This is surprisingly useful if you break your arm, or if you are reading a book and taking notes. It is a really fast print, (only 3 minutes on some printers) and the…
Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
This is a big file, don't worry if it takes some time to download. The mesh has some errors but they do not compromise slicing and printing so do not worry. I downloaded the original hand for free from:…
D&D Knight with 2 handed Warhammer
I like the original design, but it seams it is designed for left handed. My right hand is reserved for the soldering iron. So, the files are mirrored, to be used with left hand. It sits better in left hand, and scroll cog does not poke…
The One-Handed Thumb Book Holder is the perfect solution for avid readers who enjoy reading on the go, whether standing in line, traveling, or simply lounging around. This sleek and ergonomically designed accessory fits comfortably over…
So I need some new feet for my Lasko box fans... who doesn't... those things break so easy it's criminal. In any case I looked on Thingiverse and there are several available but they all need lots of support. If I'm going to use extra…
I am still not able to print a working figure but I want to use this sword if I managed to have a sturdy Lucky 13. In the meantime I would like to share my design with you and would be happy if someone else could use it. If you post a…
The pot is inspired by the structure of another old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Improvements: Right-handed version Longer versions for better ergonomics 60 mm version fits perfectly on a MK4S print bed 115 mm version has the same grip to stock distance as a Steyr AUG Magnet holes were modified to fit the more common…
Assembly Description List of non-printed parts 1 pcs - M5 Hex Cap Nut GoPro knobs are in three different lengths for screw: M5 50mm screw with hex head M5 40mm screw with hex head M5 30mm screw with hex head
Put this on your pegboard where you will need it. It presents the marker so that you can easily grab it. Pull the marker straight out if you want the cap with it. If your peg board vibrates, you can store the marker twisted to keep it…
Jack stand - Chandelle pour RC Crawler. Hauteur de 45mm à 75mm. 1 Chandelle 1 Rallonge 1 Bride
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Chandelure, Tabletop DnD miniature with or without 25 mm medium base which can be used for DnD…
Keep your thread snips from stabbing everything in your drawer. These covers are simple—but the little details make a big difference. This improved version adds: Thumb and finger grips for better control Push blocks for easy one-handed…
Use the SLOT version only if you have a knuckle grip or need to slide the controller in and out quickly. Otherwise, the HOLE version will be easier to print and there will be less ringing artifacts on the cup portion of the part.
Voronoi style Lampshade/Vase: I used PETG to have the shiny effect petg offers, but it would be easier to print in pla. To use the model as lampshade, create or modify a negative part of the size you need (I used 40 mm for a e27 fitting)…
Hier ist ein Halter für den Parkside Handentgrater zur Montage an der Werkzeugwand. Here is a holder for the Parkside hand deburrer for mounting on the tool wall.
passend für 5mm Lüsterklemmen
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Inspired by an idea from @3DBrooklyn, I came up with this design that is easy to…
Drop-in replacement whammy bar base for Wii Les Paul guitars, in both left- and right-handed configurations. Matches the original design as closely as possible. Printing While PLA can probably be made to work, I recommend printing the…
EDIT: older Master 3 version bottom plate (not tested !) added in files MX master 3S for lefties This guide will show you how to convert an existing MX Master 3S to a left handed version. The conversion is reversible, however you will…
This adapter allow you to drive an RC car one-handed, use your index finger for throttle like usual, steer with your thumb. Great for driving between obstacles on a crawler trail or when you're also trying to film while driving. The inner…
Candelabro simple para velas estándar de 2,2 de diámetro. Altura de 20cm y 16 cm. Simple candle holder for standard 2.2 diameter candles. Height of 20cm and 16cm.
This is a remix of the pistol grip model. I have redesigned it so it can be used as a stock. I would print this at a high infill density so that it is solid. I have used mine, at 60% density, for 3 weeks and it works a treat! it is useful…
This is a contraption to assist in feeding solder when making multiple joints. It lets more solder be advanced with minimal movement or effort to reposition. A 3d printed hollow tube forms the base and with a wire ferrule connection at…
I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the…
If you often hold your books open with one hand and find it difficult to position your hand just right to keep the pages open, this little gizmo can help! The sides are wide enough to hold pages open, and the edges that go around the…
Usage This roller clamp can be used on elastic tubing ranging from only a few millimeters up to 16 mm in diameter. The main difference between the models is the wall thickness of the tubing: The 12 mm model works for a wall thickness of…
This comb can be used with left or right hand. I've shortened the handles somewhat as well, making them sturdier. This was quickly done in slicer but I found the fix to be very useful, so I thought I'd put it here. Due to reduced handle…
25 g · 4 full-size SD cards · no supports Push the lever with your thumb: Four SD cards step out of the case at different heights, each one easy to reach. Push it back and they disappear. One hand, one motion, no lid to open and drop.…
Holder and spacer for wall mounting Bessey EZS one-handed Clamps. They are designed in a way, that they can be put side-by-side and have the same space between them. So if someone have more than 4 clamps they can be mounted in one row.…
Nut M8 left handed, 13 mm width across flat, washer included, 3 % tolerance build in. Printed in PETG. Please share your makes! Mutter M8 Linksgewinde, SW 13, mit Bund, 3 % Toleranz integriert. Gerduckt aus PETG. Bitte teilt eure makes!
Inspired by the "One-handed removable paper roll holder kitchen wipe tissues" from Barebaric, I designed my version to work with "Sy's Peglock - Locking Pegboard System", a 25mm pegboard and a roll length of 260mm. For the assembly, 4…
a remix with a different hidden attachment to the wall with a nail or screw
Candle Cover Sleeves, Chandelier Candelabra Socket Covers 101mm almost 4” Tall Candle 21mm Inner Diamerter
Handlebar remote control for push buttons to control things like roadbooks or tripmasters. It is designed for 12mm waterproof push buttons. I made a remix to enlarge the holes for the buttons and designed a different clamp that fits…
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
This is an easy-to-print, easy-to-use one handed adapter for your Traxxas TQ or TQi transmitters. I recommend printing it with three wall loops and with 25% infill. Enjoy!!
Usage I designed it for usage on a french cleat with a depth of 15mm with the Wolfcraft PRO series clamps in mind, specifically the; Wolfcraft PRO M One-Hand Clamp Wolfcraft PRO L One-Hand Clamp Printing You should be able to print it…
I made some improvements off of the original design by Vexelius. This version has locking indents and a fitted bottom indent so the joycon doesn't move around nearly as much. Additionally, the locking indent will keep the joycons from…
My take on Yogi - The ultimate one-handed fidget spinner! No Supports. No glue or screws. Can be 100% printed (or use a 608 bearing from an old fidget spinner or skateboard). Settings: 0.2 Layer height or finer. A 50-60% infill helps with…
Modification for the lever to make the wallet usable with just one hand. You can mirror the part in the slicer for use with the right hand (all the parts used from the original wallet must be inverted too).
SG22 Carry Handle with picatinny rail and fixed sights. 8.36 inches long, ideal for smaller printers. Open handle is easy to grip. Mount with 2 M4 screws and nuts, or similar in SAE
The model is based on models that are readily available to buy (e.g. on Amazon). I modelled this one by hand and improved the ergonomics. I also provided 2 versions, one for left-hand use one for right-hand use. You can get a bunch of…
I made this book page holder and fidget spinner inspired by the Baterang from The Dark Knight movies. It's perfect for school books You can easily read your book with just one hand. It features a rotating ring in the middle for more…
Zdravím, V tomto projektu jsem se pokusil navrhnout stropní světlo / lustr, jehož všechny části budou vyrobeny na 3D tiskárně. Níže je uveden seznam jednotlivých dílů a jejich množství, které bude nutné vytisknout ke kompletnímu…
Color: White / Champagne / Silk white Materiel: PLA / PLA+ Brim: Required, smooth sheet recommended (strong adhesion required for printing)
I had a broken globe on a chandelier that I could not find a matching replacement. The new globe updates the fixture from a “gay nineties” to a more modern look. Dimensions are shown in the images. PET-G .4 mm nozzle .12 layer height…
I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…
Lampshade for chandelier. Print with supports, layer thickness 0.2 mm, nozzle 0.4 mm, infill 20%.
For situations and people that may only have one hand free this simple quick clasp serves the purpose of a traditional button but adds a little flair and convenience. Options: Left , and Right handed variations provided. Option A has a…
This mount was specifically designed to fit the handlebar bracket for the Ducati Monster. The center of the design has a mount that is compatible with quadlock. One M5 insert is required for the centre hole, and 4 x washers (1 for each…
Introducing our 3D Printed Milwaukee Tool Case Handle Replacement – the perfect solution for upgrading the durability of your Milwaukee tool case. Specifically designed to address the common issue of the original handle's fragility, this…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
larger sized mod co-created with caregiver for an elderly person. Screw added for stability.
This is a centerline marking scribe, similar in general function to many other centerline scribes. However, it is custom designed to fit the Pentel GraphGear 1000 (PG1019) 9mm mechanical pencil (7mm & 5mm would probably fit as well; other…
See original model for print / assembly instructions.
Update 4/25/23 : Added a parametric Fusion360 version that you can customize to your liking, has built-in tolerances for of +0.1 for magnet diameter (depth is exact). Enter the values you want for your magnets and have fun! Update…
Choose the version you need, I made one for 10x20mm and one for 6x20mm magnets. Then just print the four parts with your normal print settings without supports and insert magnets and the printed screws then add it to your door and screw…
Heyhoooo Here I have a Christmas Chandelier that can hold 4 x LED Tealights. I designed it to be 100% printable and no other hardware parts than the lights are required. The Holder for the lights have a diameter of about 38 mm and a…
I was going to replace the one in my Honda civic that was broken but the ones on the internet looked a little weak so i remixed this one.
Printed with Colorfabb Woodfill filament for a natural wood look. Printed in halves of cubes, a total of 10 prints with minimal support material. Glued together with Cyanoacrylate glue. Its a one of a kind conversation piece. Make sure…
Bottle Opener - Uses an 8x2 Magnet instead of 8x3
Glock Trigger Stop Remix for left hand Print instructions Category: Sport & Outdoors Summary Glock Trigger Stop Remix for left hand Print Settings Printer Brand: Creality Printer: Ender 3 </div> Rafts: No Supports: No </div> Resolution:…
i would print this with supports if yo want fine detail and a low chance of a fail but they are a pain to take out
A modern and aesthetic chandelier design. Optimized for easy printing on your 3D printer. With its stylish design, it can be used in both home decoration and workplaces. It offers the opportunity to personalize with different size and…
We are SalvageGarden Ltd , a volunteer-led community makersapce focused on co-creating assistive technology (AT) with and for people of diverse abilities. Consider supporting us with a donation – every little counts. How to assemble
Remix that holds the left controller for the lefties
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
Candelabros de mesa para velas de 65mm de diametro con base modelada para colocar un recorte de goma eva antideslizante. 3 tamaños distintos para generar un conjunto, 14cm, 17cm y 20cm. Table chandelier for 65mm diameter candles with a…
Tool to make planting just a little easier and bit more interesting
I made a remix of the Crystal Chandelier Pot to hang it on Ikea Skadis. The model is divided in two part so main body can be printed in vase mode. Print separatelly and glue both model. I made the Pot smaller, it can be resized but the…
This is a remix using some parts from the original PrusaCaster and the Bexgears remix. Each part was then mirrored. it is meant to be used with this kit:…
A D&D Skinchanger Berserker typically refers to a thematic, often homebrewed, Barbarian subclass or character concept that combines rage mechanics with temporary, bipedal beast transformation (e.g., a "bear-man" or Beorn-style character).…
A DZP mk2 left handed holster. I got this model on the DZ website but you have to put in a bunch of info on it and it's kind of hard to realize it's a thing because it's not on any 3D websites so I thought I'd put it here :) Use M3 screws…
This is a remix of SLYNX's design. I added a considerable amount of changes to the original design so now it basically holds the similar shape and assembly design but with my spin on things. Items I added: Hand Piece - I have 2 options.…
People with limited mobility in their hands, often due to conditions such as Parkinson’s, arthritis, cerebral palsy, and other motor control disorders, face significant challenges in the realm of performing daily tasks. The one handed…
I designed these sorting trays to be as light as possible and to store them in one piece . Openings are really narrow - from 12 to 20mm - to best fit gaps in plastic cases you sort your screws/nuts in. Three versions included - each for…
This can also be used without the O-ring and sized up for any needs. Very easy to open and close with one hand. Printed in PETG
I was always struggling when screwing/unscrewing something with one hand only, this helped me a lot, hope the same for you! You can swap the top part to fit different size of wrenches using the same bottom part.
This eBook holder is designed specifically for the Kobo Clara, allowing you to hold your device comfortably with just one hand. With two cut-out holes on the back, you can easily insert your fingers, providing a secure grip while you…
Radiator bleed key I Have etended to 65mm(total length)
Overview This is the same as the V3 but uses standard keyswitches. The Quirkey is designed for use by people who cannot use a conventional keyboard because of limited mobility or vision. It uses just 6 keys to emulate a full 101-key…
I made the opening a bit smaller to fit a US penny and added a spot got a 6x3mm magnet. I also rounded the sharp pointy end. The ones I’ve printed break on the first use like the comments of the original. Let me know your results. PETG…
for your nerf guns, i present an accurate scope. comment, like, and request what you want next!
Xbox Controller mod for gamers missing a hand The Idea: For gamers missing a hand, the analog stick and front facing buttons can usually be manipulated using the stump. However controlling the triggers presents a challenge as there is no…
Mit diesen Griffen kann man seinen Core One farblich so gestalten, wie man möchte bzw. wie die anderen Teile – Spulenhalter, seitliche Griffe usw. – sind. Montage: Als erstes entfernen Sie den geklebten Metallgriff vorsichtig, falls er…
Everyone designs their holders at 180-degrees. Not only is this uncomfortable, it can damage your bindings. I designed this less extreme book holder to save your books from damage, while still allowing for one-handed reading. Works on…
