IKEA lack enclosure door handels
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.30 – €1.59 net (excluding VAT)
For file: Door handles 20x10mm magnets_0.2mm_PLA_MK3S_1h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.44 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.64 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Here is my design of door handels for an IKEA lack enclosure....
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 122
- Makes
- 3
- Views
- 1,253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Choose the version you need, I made one for 10x20mm and one for 6x20mm magnets. Then just print the four parts with your normal print settings without supports and insert magnets and the printed screws then add it to your door and screw the screws as tight as you need, but don't over tighten the screws otherwise the model could break.
hope you like the model, give me your feedback in the comments.
best regards
mlax