Counting matching models…
Version 4 is out! The STL orientation is incorrect. Please print the parts with the diode channel facing upwards. v4 socket improvements: Easier to print Improved robustness of row wire connection Faster to assemble / put in diode Better…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
This is my self-designed, 3D printed, handwired, mechanical keyboard. It's a 75% layout with clickable volume knob and runs on QMK Firmware, so you can reprogram it to whatever you like. This is an extremely involved project and is too…
Check out the full build video on YouTube! IMPORTANT TO KNOW : This project WILL require customization from YOU to adjust the design for the specific keyboard layout in your country. You will be required to modify both the keycap files,…
Remixed the excellent design from stingray127 with a few tweaks in order to make installation slightly easier. Added an angle for the horizontal wire so that they stay put and avoid the vertical wires of the matrix. With the above…
A handwired version of the kyria keyboard by splitkb.com A split ergonomic keyboard with 50 keys and a columnar layout. I printed at 0.2mm on an ender 3 max with 999 top layers to make it solid. Github:…
The PetruziaMini is my first handwired ortholinear mechanical keyboard, fully 3d printed (except switch, cables, screws and controller obviously), inspired in the number of keys and keymap from some 34/36 keys split keyboards (like the…
This thing - selfmade hotswap socket for handwiring keyboard on Gateron or Ketchron low profile switches. Support for optional RGB led (SK2812 mini) installation. I am used it for make Corne v3 - based Cornedion…
0.2mm layer height works fine for all the stls but you might want to use a finer one for the plates and a thicker one to make the case print a bit quicker. the holes are for m2 screws. I printed the bottom plates in transparent filament…
Made this design for a friend, figured I'd upload it here. Just a snap fit 3x3 macropad intended to be used with an Arduino Pro Micro. The hole for the USB should have enough clearance to mount the pro micro in with some foam tape or…
More pictures and details on the project repo: github.com/terryorchard/keyb/torchnum This is the STL for the body of my custom numpad / macropad. Instead of the traditional “tenkey” layout I went with 19 keys + a rotary encoder for CW and…
A 48key column staggered split handwired keyboard. Design files are included, please design your own Decals and Badges. Make it your own board! Bill of Materials - BOM 2x Waveshare RP2040-Zero 2x TRRS Jack 48 switches - ( I used these ,…
I used 3 xiao ble microcontrollers, one for each side plus one for an optional dongle. The NFC pads on the microcontroller needs to be used. Each switch needs a diode. Optionally you can use kailh hotswap sockets. The batteries I used are…
Hello! I designed this for myself, but I thought to upload it just in case someone else was building a BastardKB keeb and ran into the troubles I had. The plate is designed to snap into the heat insert holes for the PCB shield, just like…
As I said in TheDroppelganger summary (https://www.printables.com/model/299771-thedroppelganger-a-filco-compatible-87-key-mechani) I love my Drop CTRL - and if i was a very rich man, i would own all the variants...but i'm not...so I did…
A case and plate for a handwired Lily58 split keyboard. Here is the GitHub repo from the original design. I built my version using a RP2040 Pro Micro. For interconnect I used DuPont connectors because they are very easy to find and they…
Bill of materials 17 Cherry style, plate-mounted switches, for example Kailh Box Jades . 17 numpad keycaps salvaged from el cheapo keycaps set . 17 1N4148 diodes 3 2u plate mounted el cheapo stabilizers . 10 M1.6 x 5mm self tapping,…
This is a case for the Contra 40% mechanical keyboard ( https://cartel.ltd/projects/contra/ ), but can be used for handwiring as well, because the plate is pretty thick. The Contra PCB requires sanding to fit into the case. Process for…
PetruziaOffice is my biggest 3d printed handwired mechanical keyboard (yet). The goals were to use the most of the usable pin in a pro micro controller but keeping the keyboard printable in a 22x22 cm printer plate. The clip in the back…
Plate and case for handwiring a CRKBD with Dupont connector socketing
I have wanted to build a Redox keyboard for a while but I despise fastening directly into plastic parts for projects like this as I know I will make mistakes and printed parts aren't that forgiving. So I decided to make some simple tweaks…
This is my third keyboard design, but the first to be fully split as well as having 3D ergonomics. It was largely inspired by the Kinesis Advantage, Corne, Dactyl/Manuform, and has one encoder per half that I fell in love with on my…
Hard case for handwired improved Corne v3: Monolithic body with integrated top plate. Selfmade hot swap sockets [https://www.printables.com/model/1315586-handwire-hot-swap-socket-for-redragon-lp-switches]. Corne v3 layout with 3…
Ali sells cheap low-profile Redragon switches, but there are no sockets for them. I tried the socket of the respected stingray127 [https://www.printables.com/model/158559-handwire-hot-swap-socket-for-mechanical-keyboard-s], but found it…
A simple keypad case for use with making a handwired mechanical keypad using an rp2040 chip. Plate is designed to be a friction fit on the top, however there are some M2 screw locations on the top plate to further secure to the posts…
this is for a 24 key handwired numpad, with mx switches. Designed for m2 screws and 8mm standoffs.
Simple 4x10 grid Ortho. Top mount with/without O-rings. Handwiring required. Compatible with any controller thats less than 24mm wide and kinda flat around the USB port. You need the following tools and items to build this: Soldering…
Since my first published keybboard was The1987 (https://www.printables.com/model/299777-the1987-a-modular-retro-inspired-87-key-mechanical) and it's fairly popular, and its designed around the Phantom circuit board and Teensy 2.0, which…
A keyboard based off the Sick68 in case anyone is interested in a more minimalist aesthetic. Using an arduino pro micro “upgraded” to get 2 extra pins, here is a guide. Key layout is the same as the sick68 (As it uses the same plate) I…
Is shrinkflation amusing yet? Less 2187 for more...something Since I recreated The1987, it followed suit that i should include this one as well. Its the more modern design with a small sprinkle of cyberpunk. The2187 is the pretend future…
If you want to build a ximi split keyboard (trackball version) from Fingerpunch without the original PCB, this is a little piece I created to hold both the controller and the TRRS jack in their position. This is for the right side, mirror…
Have you ever felt cramped while typing on an ortholinear keyboard? Was your monoblock ergo perfect in one position and terrible in all others? Are you tired of hauling two separate halves with your fully split keyboard? Well, I may have…
i made this artsey case hor a handwire i also used a arduino pro micro
A handwired trackball with a 38 mm billiard ball and a PMW3389 sensor, in two versions: wired on an RP2040-Zero running QMK with Vial, and wireless on a nice!nano running ZMK. The wired case comes with one, two or three buttons, the…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
Handwired clon of PNCATEHO (RISATENO) [ https://github.com/aroum/PNCATEHO ] with regular LP switches and RP2040 MCU. The photo shows two case options - with open and closed switches. Appended cases for MX switches. Used: MCU RP2040 Zero…
9-Key RP2040 Macro Pad I designed this project to teach myself 3D modeling/CAD. It’s a functional prototype and will probably not be finished. Hope it can help somebody start learning CAD Features: Brain: Waveshare RP2040 Zero. Keys: 9…
View the build guide on the original model page! The only changes are that you will have to glue the halves together before assembling and the firmware layout is different. The stabilizers for the larger keys are currently undersized…
Required hardware 54 switches, this was modeled with low-profile MX-switches in mind 54 1N4148 diodes 1 RP2040-zero 1 M3x4 with countersunk head 4 M2x12 Printing Material: PLA Perimiters: 4 Top/bottom layers: 4 Infill: gyroid, I do 8%…
I had some parts lying around at home and wanted to try to design a handwired keyboard from scratch. As I only had devcards and no pro micros etc lying around, I designed the keyboard around that, and tried to make it look real…
These "handwire guards" are 3d printable isolators for preventing shorts on row/column crossings in a handwired keyboard matrix. I recommend to print them from a flexible material like TPU. The holes designed for 1 - 1.2mm wire. There are…
Wireless Split Mechanical Keyboard Case This is a fully printable case and plate set designed for a 54-key wireless split mechanical keyboard using two nice!nano v2 controllers or compatible clones. The case has been printed and tested…
Its wireless version of my handwired PNCATEHO ( https://www.thingiverse.com/thing:7178890 ). Massive case, LP Gateron Red and nice!nano. ZMK firmware: https://github.com/alko-kbd/zmk-risateno Prints on supports in normal position.…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
This keyboard aims to expose the beautiful Raspberry Pi Pico microcontroller. It has aggressive pinky column staggering, which resembles a Piantor keyboard layout. For the BOM and Build Guide, check out the Github page . Printing Guide…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
This is a case for the GNAP2.0 pcb of 40percent club, you can find more information about the PCB here: http://www.40percent.club/2016/10/gnap-20-plateless.html and here:…
