40 models
Overview The goal of this design was to reduce the friction between the filament spool and the spool holder on the Creality Ender 3 without requiring the use of bearings or other parts. I designed this for HATCHBOX PLA (1.75mm, 1kg)…
I have several of these empty, very sturdy HatchBox spools lying around and wanted to do something useful with them. Designed these bins to fit into the spools using the holes around the edges. They are printed with a .4mm nozzle at .2mm…
This is a remix of 414paint's hatchbox spool drawer. I added a cutout to act as a handle for easier access as well as another drawer with a divider. The original design here. https://www.thingiverse.com/thing:3261053 Print Settings…
I created this Temp Tower for a customer who is starting with ABS. Hatchbox ABS temps are awkwardly low. So this model will accommodate the lower temps.
Have several HatchBox spool parts bins and want to organize them? Turn them into a storage tower! This model will allow you to stack and connect as many spools as you wish. Start with a base, a washer and a cap. For each spool you want to…
Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy
These drawers are designed to fit the standard Hatchbox filament spools. Four drawers per spool, and clips for stacking the spools on top of each other. The pins should fit the four holes around the edge of the spool. No extra parts…
Designed specifically for the Hatchbox. Only requires 13grs of filament per section (4 sections) per spool (52 grs in total). I recommend to print with supports from build plate only. You will require only 4 small screws per spool. Print…
I'm using Aaron Nance's Hatchbox spool storage system to organize my Lego, and I needed more variety in the size of drawers, so I remixed the model to have various heights and widths. For the half-height drawers, this is what worked well…
3D Printy has provided a great tool, but let's face it, most folks don't want to learn a new language and would rather just have the STL. This set of STLs are specific to the Prusament spools with the cardboard center as well as Hatchbox…
HATCHBOX Revolver Spool Adapter for 3D Printer Accessories. Designed to enhance compatibility, the HATCHBOX Revolver Spool Adapter reduces the size of the hole on our new spools, making them suitable for accessories like the AMS LITE,…
This drawer fit perfectly the Hatchbox Spools, which features a removable tray for storing both tools and bits.
Remixed to be compatible with Hatchbox filament boxes. Adjusted the thick side to the correct dimension Added some thickness to the thin side because it sits a few mm lower than the thick side. Print Settings Resolution: 0.3 Infill: 0%…
A simple tool organizer to fit atop a Hatchbox Filament Spool. Used with the Hatchbox Spool Drawer Organizer design found here https://www.thingiverse.com/thing:2111353 Gotta love the bridging abilities of the Prusa!!! Test your printer…
Use all those large filament spools for something nice. (Check CAD image for assembly 'instructions'.) This project is a pretty old project one that I never really ended uploading since i thought it wasn't quite perfect. It's not super…
Remix from @Lukes3D to work with Hatchbox spool. Using double bearing for smooth winding. I have also made 1 version using a solid shaft on one side to add more friction for anyone that needs. But it's in STEP file only for not making…
This is a center spool hub made specifically for 54.3 cardboard spools, as it fits them exactly. It fits the Polymaker brand cardboard spools and one variation even has their logo on it. It fits Inland cardboard spools (many of which I…
I didn't like the oversize center hole in the new hatchbox spools so I made an insert for them. The spools aren't all exactly the same size so some fiddling may be required on the model. Let me know if there are changes I can make to make…
Simple label slot requires a small piece of paper cut to approximate size. No significant changes required in print style.
print 2 and interlock them, then insert into the holes in the spool. may work with creality spools as well. Other brands
I saw a couple different versions for this spool, but none of them are really that good. They all seem to relay on squeezing the side of the spool which is flat and smooth. I designed these to clip in the recessed areas on the spool so…
This was my solution for making my Hatchbox storage containers a little more sturdy and not slide around. This was made to be printed when your spool is almost empty and can use the last bit to make a link if needed.
This is a variation of cSandra's version for Prusament spools modified to fit Hatchbox spools. The walls fit nicely and are easy to mount you just have to drill through the spots that normally hold the filament with a 5mm drill bit and…
Remixed for quicker creation and much less filament. ;) There is a printed top and bottom frame, but the large portions are now cut from chipboard (DXF pattern supplied). Slip the cut pieces into the grooves as noted in the DXF file. You…
I use Hatchbox filament boxes without tops, to store spare parts and materials. with these corners I'm able to stack them very high as it is primarily plastic that bears the load. You'll need for corners. Two in original orientation, and…
Here are drawers that are for hatchbox spools specifically, and can be printed in vase mode. Due to that I use small screws to fix these. These are flush. Select an appropriate STL, as I included a recycle symbol at the bottom of the…
A simple pencil holder that fits in the center of a hatchbox spool. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .3mm Infill: doesn't matter Filament: matterhackers PLA Black Notes: no supports…
This is a spool holder I designed in OpenSCAD so I could adapt it to various situations. The current version isn't very easily customizable, but I'm including the sourcecode in case you want to dive in. Instructions Print out the base,…
Really liked JHON_DOOM_MAKER's design, and adapted it to fit snugly on hatchbox cardboard packaging. There one wall is triple thickness, and the other is a single, so that required some cut-to-size. https://youtu.be/UOrY\_K12cbU Print…
This is a spool display/storage stand for 1kg and 0.5kg spools.
SOME ASPECTS OF THIS ARE UNTESTED PRINT AT YOUR OWN RISK The bearing clearance is 0.2mm so make sure your printer can handle it. Just a spool holder/spinner I had in my head based on my recent project so I decided to sketch it in cad.…
Some Hatchbox filament spool hubs I designed in SolidWorks for my Prusa i3 MkII. Hatchbox has two sizes of filament spools, and I made hubs for both sizes. Just print two of whatever size you need and one center rod and you're done.…
The turntable by wabbitguy is a great design. I took his spool jointer file and created a knob for the top spool to easily rotate the assembly. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes…
This model replaces two parts on the original spool holder: the 30mm roller and the end-cap. The benefit is that filament spools with larger center openings like Hatchbox (54mm) won't flop around as much. Instructions: loosen the two M4…
This is a shaft for the big spool holder of Mark Wheadon http://www.thingiverse.com/thing:761893 I created this for a spool diameter of 32mm and a width of 64mm. Hopefully this will fit, because I doesn't have Hatchbox filament here. So…
The 2-part Hatchbox spool can be used as a Master Spool. It has two bolt heads that stick out on one side. The axle for spools that use (https://www.thingiverse.com/thing:2460873, Filament reel holder by mindfreeze) has large nuts that…
Show off your branding! Got bored one night and decided to be semi productive and make a few magnets for different things. Magnets are printed INSIDE the object, using 20x10x2mm magnets. Can be found easily on amazon.…
Aug. 20, 2018: Remixed the filament clip by "walter" to fit Raise3D ABS and PLA filament spools. R3D ABS Filament Oct. 9, 2018: Designed a new clip that works with Hatchbox filament. This provides a much tighter fit than the original.…
